1-800-234-3280
X
Thanks for signing up!
Use code MAIL5 for $5 off your order.
X

Due to the COVID -19 pandemic our retail store will be closed till further notice. We are still taking orders online and by phone. Please visit www.AntiqueTractorBlog.com for a complete update.

    1 - 24 of 32 Products >
  1. Breaks
  2. >
  3. all

Breaks

Sort by:
View: Show: per page
Related Collections: Brake Lining | Break Lining | 9n Ford Brakes
Showing Products: 1 - 24 Total Products: 32

Brake Lining Set With Rivets

Ford - Fits: 2N, 9N; Replaces: 9N2021B Set includes: 4 Brake linings with rivets. Dimensions: 2" Wide X 15-1/2" Long curve. Please be careful installing as the linings are easy to crack or break. 2" Wide X 15-1/2" Long curve.

Product Number: ABC192
Price: $49.95
Related Products: Brake Lining | Break Lining | 9n Ford Brakes

MH 22 Brake Disc Lining Kit

…outside diameter and 5.000" inside diameter and 0.195" thick. Please be careful installing these disc linings as they are fragile and can break. If you break one, call us for an indivdual price. The part number is MHS039BL. Kit includes 4 brake linings and 36 rivets. One kit needed per wheel.…

Product Number: MHS039
Price: $91.50
Related Products: Massey Harris 22 | Brakes | Mhs039

Melling Engine Assembly and Break-In Lube

Allis Chalmers - Fits various models Case - Fits various models Cockshutt - Fits various models Ford - Fits various models International / Farmall - International / Farmall - Fits various models Fits John Deere - Fits various models Massey Ferguson - Fits various models Massey Harris - Fits various…

Product Number: ABC3346
Price: $6.99

Wheel Bearing Kit

…Sn:49999 to 52496, also Sn: 52566 & up using 1.250 I.D. inner bearing), TO20, TO30, TO35, Ferguson Tractor: 35, Ferguson: 40, MF Tractor: 35, 50, 65; Replaces: 835964M91 Massey Harris - Fits: 50 For 1 wheel----1.250 inner bearing I.D.---Will not fit early TE20 see Sn: breaks listed For 1 wheel

Product Number: MFS162
Price: $25.95

80" Tachometer Cable With Metal Covering

…number breaks are not listed in the parts books. If nylon sheath is desired see IHS1289 5/8 - 18 x 7/8 - 18 threads with square on both ends cable is 80" long from tip to tip and this IHS1255 tach cable includes a metal sheath --- Early 06 series used steel sheath, but serial number breaks are not…

Product Number: IHS1255
Price: $32.99

80" Tachometer Cable, Nylon

…393328R93, 89159R91 * Please measure before ordering.* 80" Inner Cable Length with Squared Ends.* NYLON sheath* Nylon sheath is correct for most applications, however early 06 series used steel sheath, but serial number breaks are not listed in the parts books.* 5/8"-18 and 7/8"-18 threaded ends

Product Number: IHS1289
Price: $25.50
Related Products: 856 Tach Cable | Ihs1289 | Tachometer Cable

Rear Axle Hub

International / Farmall - Fits: 240, 404 (UTILITIES); Replaces: 369388R1 * 22 Splines* Made from billet steel* Does not break like the cast iron original 22 splines

Product Number: IHS151
Price: $299.95

Valve Train Kit

…(see SN break for WC) and AM3820: 100 AC Industrial - Fits: the following with cylinder head casting # U3001 (see SN break for WC) and AM3820: D (gas up to engine SN: 5424), TL10 (Loader with 201" gas, LP) AC Miscellaneous - Fits: the following with cylinder head casting # U3001 (see SN break for…

Product Number: ACS3303
Price: $133.99
Related Products: Allis Chalmers Wd | Valve | Valve Train Kit

Gear Shift Lever

JD Industrial - Fits: Fits 2 Cyl.: 440 Fits John Deere - Fits 2 Cyl.: 420 (except crawler, all SN # 125000 and up), 430, 435; Replaces: M4284T * The John Deere 420 serial number break corresponds with the introduction of the slant dash. * 7/16" - 14 UNC thread pitch

Product Number: JDS827
Price: $99.99
Related Products: Shift Lever | Jd 420

Ignition / Key Switch (O.E.M.)

…serial number break corresponds with the introduction of an electric fuel pump: 7045 (SN: 3732 & up); Replaces: 0270334-6, 270334, 70270334 Fits Allis Chalmers: 6060, 6070, 6080, (7010 SN: 2685 & up), 7020 SN: 4323 & up, (7045 SN: 3732 & up - this serial number break corresponds with…

Product Number: ACS4488
Price: $49.50

Pinion Shaft 3rd Gear

…D15 (SN: 17565 & up); Replaces: 225831, 228293, 233997, 234575, 70225831, 70228293, 70233997, 70234575 For tractors with serial number below the break listed (earlier tractors) you must also order the ACS282 reverse gear. This pinion shaft has 37 teeth and 1.197" total width. This pinion shaft has…

Product Number: ACS285
Price: $149.95
Related Products: D14 Transmission

Radiator Cap

…ONLY - No Diesel models have a serial number in this range.); Replaces: AA5158R * 0.940" tall* 2.878" outside diameter* 2.727" inside diameter* The tang to tang length is 2.475"* 0.395" tang width* Gasket included* If your John Deere 50, 60 or 70 has serial number above the break plesse view JDS515

Product Number: JDS921
Price: $39.99

Radiator Cap (5 Psi)

…AA5757R * 3.185" cap OD* 1.975" tang to tang length with a tang width of 0.575"* The inside center diameter measures 1.480"* This radiator cap is designed for a pressurized system (5 PSI)* The gasket is included* If your John Deere 50, 60 or 70 is under the serial number break please view JDS921

Product Number: JDS515
Price: $21.75

Sleeve and Piston Kit with 4" Overbore

…engine is sleeved before ordering.* Please be careful installing the sleeves. If the bore is not cleaned or honed properly, then the sleeves will break if you apply too much force.* We are not responsible for sleeves damaged during installation.Please view instructions under our instruction tab.…

Product Number: FDS3090
Price: $309.99
Related Products: Ford 860 | Pistons | Ford 172 Engine

Base Engine Kit with 3-1/2" Overbore

…* 3.500" overbore* NOTE: Order rod and main bearings separately* Governor seal not included.Please be careful installing the sleeves. If the bore is not cleaned or honed properly, the sleeves will break if too much force is applied. We are not responsible for sleeves damaged during installation.

Product Number: FDS3457
Price: $399.99

Sleeve and Piston Kit with 4" Overbore

…pin O.D.* Sleeve O.D. (cold) 4.124"Please be careful installing the sleeves. If the bore is not cleaned or honed properly, then the sleeves will break if you apply too much force. We are not responsible for sleeves broken during installation.* To order the sleeves separately please order IHS4412*…

Product Number: IHS3096
Price: $379.99

Valve Stem Seal

…SN break for WC) and AM3820: W (Speed Patrol engine SN: 84247 and up), [ W201, W25 (Power Unit) ] Allis Chalmers - Fits: the following with G226 4-cylinder gas, LP engines with cylinder head casting # AM4469 or AM4472: 170, 175, D17, [ the following with cylinder head casting # U3001 (see SN break

Product Number: ABC4758
Price: $1.99
Related Products: Case Vac | Farmall Valve Seals | Valve Seals

Sleeve and Piston Kit with 3-1/2" Overbore

…engine is sleeved before ordering.Please be careful installing the sleeves. If the bore is not cleaned or honed properly, then the sleeves will break if you apply too much force. We are not responsible for sleeves damaged during installation. Need replacement rings for this kit? order FDS2098 Please…

Product Number: FDS3087
Price: $319.95

Crank Hole Casting

Allis Chalmers - Fits: G; Replaces: 800086, 70800086 * Our Allis Chalmers G crank hole casting is made from HT250 grey iron. It is more durable than the original which was a zinc die casting and prone to breaking.

Product Number: ACS058
Price: $24.50

Fan Assembly

…were made by JD, in addition to the serial number break, look for the front pulley closest to the fan to be wider than the rear pulley.), [ MC, MI, MT (SN: 10001 & up. Note, 2 different ones were made by JD, in addition to the serial number break, look for the front pulley closest to the fan to be…

Product Number: JDS542
Price: $69.95
Related Products: John Deere M | John Deere Mt | Fan Assembly

Steering Shaft and Nut Assembly

Ford - Fits: 8N (sn 216989 and up); Replaces: 8N3575B * 20-1/8" long tip to tip* Right hand spiral* Used with 2 bolt side sector on the later 8N serial numbers (sn referenced below in the application info)* If you have a Ford 8N with an earlier serial number break, see FDS188.

Product Number: FDS110
Price: $139.95

Steering Shaft and Nut Assembly

Ford - Fits: 8N (up to sn 216988 (1947-1949)); Replaces: 8N3575A * 20-1/8" long from end to end* Left hand spiral* For early steering boxes with 4 bolt side sectors* If you have a Ford 8N with a later serial number break, see FDS110.

Product Number: FDS188
Price: $199.95

Emblem

Fits John Deere - 620, 720, 820 2 cylinder; Replaces: AB5236, AF3261 * This emblem includes retaining clips* 4-1/2" width x 3-1/4" height Are you looking for the emblem for the 320, 420 (sn break), or 520? Check out our JDS3116. 4-1/2" W x 3-1/4" H

Product Number: JDS288
Price: $109.99
Related Products: Emblems | 420 | Jd 420

6 Volt Starter with Starter Drive (Bendix)

…new starter, make sure the below conditions are first checked and satisfied (warranty void if broken.)* The (main) reasons a starter nose will break:* Bent armature shaft* Ignition timing is incorrect* Improper drive to ring gear clearance* Defective distributor cap / wires causing the engine to…

Product Number: IHS238
Price: $218.75
Did you find this search useful? Yes No
Sort by:
View: Show: per page