FRONT WHEEL 3" X 15" 6 HOLE …DETERMINE WIDTH OF RIM MEASURE ON THE INSIDE (BEAD TO BEAD) NOT OUTSIDE TO OUTSIDE* Dimensions & Notes: 3" x 15", 6 HOLE, 4-9/16" PILOT, 3" BOLT ON C.C. TO DETERMINE BACKSPACING, LAY THE WHEEL FLAT ON THE GROUND WITH THE BACK OF WHEEL FACING UP. NEXT, LAY A STRAIGHTEDGE ACROSS WHEEL AND MEASURE THE DISTANCE…
Product Number: WHS019
10 X 38 (DEEP DROP CENTER) REAR RIM …400* Fits John Deere: A, B, G* Fits Massey Harris: 33, 44, 333, 444 with CAST WHEEL* Fits MM: MM U with CAST WHEEL* Other Info: TO DETERMINE WIDTH OF RIM MEASURE ON THE INSIDE (BEAD TO BEAD) NOT OUTSIDE TO OUTSIDE* Dimensions & Notes: MUST USE OLD STOP BLOCKS* Replacement: 55563D* Helpful Receiving Practices…
Product Number: WHS029
REAR RIM --- 9 X 28 * Fits Case: VAC* Other Info: TO DETERMINE WIDTH OF RIM MEASURE ON THE INSIDE (BEAD TO BEAD) NOT OUTSIDE TO OUTSIDE* Dimensions & Notes: 9 X 28 --- 5 DIMPLE --- LIKE ORIGINAL* Replacement: VT4323* Helpful Receiving Practices! Read before placing your order!
Product Number: WHS027
Price: $212.50
4.5" X 16" (6 LUG) FRONT WHEEL W/ 4 WHEEL WEIGHT HOLES …WIDTH OF RIM MEASURE ON THE INSIDE (BEAD TO BEAD) NOT OUTSIDE TO OUTSIDE* Dimensions & Notes: 6" CIRCLE WITH 4.62" PILOT 2500 LB CAPACITY FOR 5.50 x 6.00 x16" TIRES TO DETERMINE BACKSPACING, LAY THE WHEEL FLAT ON THE GROUND WITH THE BACK OF WHEEL FACING UP. NEXT, LAY A STRAIGHTEDGE ACROSS WHEEL AND MEASURE…
Product Number: WHS022
REAR RIM --- 10 X 28 * Fits Case: VAC* Other Info: TO DETERMINE WIDTH OF RIM MEASURE ON THE INSIDE (BEAD TO BEAD) NOT OUTSIDE TO OUTSIDE* Dimensions & Notes: 10 X 28 --- 5 DIMPLE --- LIKE ORIGINAL* Replacement: VT5570* Helpful Receiving Practices! Read before placing your order!
Product Number: WHS028
REAR SPINOUT RIM STOP * Fits Allis Chalmers: ALLIS MODELS with PARALLEL OR 90 DEGREE DRILLED RIM RAIL* Fits Case: CASE MODELS* Fits Cockshutt: COCKSHUTT MODELS* Fits Ford: FORD MODELS (1965 and up)* Fits International: various IH / Farmall models* Fits John Deere: JD MODELS* Fits Massey Ferguson: MF MODELS* Fits Massey Harris…
Product Number: MIS109
Price: $19.95
12 X 28 REAR RIM (SPINOUT) …55 and up* Other Info: To determine width of rim measure on the inside (bead to bead) not outside to outside --- Use MIS109 stop for this rim* Dimensions & Notes: 4 Rails --- Holes for stop adjusment are drilled 90 degrees perpendicular to side of rim not 90 degrees to rail --- Stop holes are angled*…
Product Number: ACS026
REAR RIM 14" X 38" …530, 620, 630, 720, 730, 3010, 3020, 4010* Fits MM: MM MODELS* Fits Oliver: 770, 880, 1550, 1600, 1650, 1750, 1800* Other Info: TO DETERMINE WIDTH OF RIM MEASURE ON THE INSIDE (BEAD TO BEAD) NOT OUTSIDE TO OUTSIDE* Dimensions & Notes: 14 X 38 --- DOUBLE BEVEL 18 DRIVE LUGS TOTAL* Helpful Receiving Practices…
Product Number: WHS024
REAR RIM 10" X 34" …Harris: 22 (MUST WELD OLD CENTER INTO RIM)* Other Info: TO DETERMINE WIDTH OF RIM MEASURE ON THE INSIDE (BEAD TO BEAD) NOT OUTSIDE TO OUTSIDE* Dimensions & Notes: BLANK CENTER --- 10" x 34" --- MUST WELD OLD CENTER INTO THE RIM --- TO DETERMINE THE WIDTH OF RIMS/WHEELS: MEASURE THE INSIDE FROM BEAD TO…
Product Number: WHS034
FRONT WHEEL W/ WHEEL WEIGHT HOLES …DETERMINE WIDTH OF RIM MEASURE ON THE INSIDE (BEAD TO BEAD) NOT OUTSIDE TO OUTSIDE* Dimensions & Notes: THIS IS A FUNCTIONAL RIM, NOT RESTORATION QUALITY 5 HOLE 3" x 12" 3 1/8" PILOT, 2 3/4" BOLT ON C.C. TO DETERMINE BACKSPACING, LAY THE WHEEL FLAT ON THE GROUND WITH THE BACK OF WHEEL FACING UP. NEXT,…
Product Number: WHS020
3 X 15 FRONT WHEEL, 5 HOLE …Fits Massey Harris: Pony, Colt, Pacer, Mustang, 20, 22, 30, 81, 82, 101 Jr* Fits MM: BG* Fits Oliver: Super 44, 440* Other Info: To determine width of rim, measure on the inside (bead to bead) not outside to outside* Dimensions & Notes: 2-3/4" Pilot, 2 5/8" Bolt center to center* Replacement: Oliver: 450530A
Product Number: ACS010
REAR RIM …Fits John Deere: M, MI* Other Info: TO DETERMINE WIDTH OF RIM MEASURE ON THE INSIDE (BEAD TO BEAD) NOT OUTSIDE TO OUTSIDE* Dimensions & Notes: BLANK CENTER --- 8" x 24" --- MUST WELD OLD CENTER INTO THIS RIM --- TO DETERMINE THE WIDTH OF RIMS/WHEELS: MEASURE THE INSIDE FROM BEAD TO BEAD NOT OUTSIDE TO…
Product Number: WHS040
REAR RIM 9" X 36" …SERVICEABLE FOR AV, Super AV (ON THESE APPLICATIONS, IT WILL BOLT ON, BUT THE CLAMPS ON OUR RIM ARE MORE CENTERED THAN THE ORIGINAL, THE ORIGINAL RIM CLAMPS AT THE OUTER EDGE)* Other Info: TO DETERMINE WIDTH OF RIM MEASURE ON THE INSIDE (BEAD TO BEAD) NOT OUTSIDE TO OUTSIDE* Dimensions & Notes: 6 CLAMPS…
Product Number: WHS025
FRONT WHEEL …DETERMINE WIDTH OF RIM MEASURE ON THE INSIDE (BEAD TO BEAD) NOT OUTSIDE TO OUTSIDE* Dimensions & Notes: 6" x 15", 6 LUG PILOT HOLE = 4.625" 6" BOLT CIRCLE USA MADE TO DETERMINE BACKSPACING, LAY THE WHEEL FLAT ON THE GROUND WITH THE BACK OF WHEEL FACING UP. NEXT, LAY A STRAIGHTEDGE ACROSS WHEEL AND MEASURE THE…
Product Number: WHS042
REAR RIM 10 X 24 …Super A, B, BN, 100, 130, 140, 240, OTHER MODELS* Fits Massey Harris: PONY, PACER* Fits MM: 335 INDUSTRIAL* Other Info: TO DETERMINE THE WIDTH OF THE RIM, MEASURE THE INSIDE (BEAD TO BEAD) NOT OUTSIDE TO OUTSIDE* Dimensions & Notes: 10 X 24 --- 4 LOOPS --- USA MADE --- 14-12" C-C LOOPS --- VALVE STEM HOLE…
Product Number: WHS002
FRONT WHEEL * Fits Case: VAC* Fits International: A, B, C, Super A, Super A-I, Super C, 100, 130, Early 140, 200, 230* Other Info: TO DETERMINE WIDTH OF RIM MEASURE ON THE INSIDE (BEAD TO BEAD) NOT OUTSIDE TO OUTSIDE* Dimensions & Notes: 3 Lugs are welded - NOT original look --- USA MADE* Replacement: 57095D* Which…
Product Number: WHS033
