…steering wheel.) * This gearbox is shipped dry and needs to have 90 weight oil added before using.* Must reuse old pitman arms.(not available from STP)* Will also fit early Ford 8n with non adjustable steering by ordering (2) FDS393 tie rod assemblys plus (2) steering…
Product Number: FDS3213
Allis Chalmers - Fits: [ B, C, CA, G, IB (With Ross SteeringBox) ]; Replaces: 210475, 70210475 TO FIT ORIGINAL TUBE MUST SAND APPROXIMATE .005 OFF O.D. OF BUSHING -- 1-3/8" OD -- 3/4" ID
Product Number: ACS339
…(16), Pony Fits ROSS steeringbox only.* 0.919" overall length * Fits 0.375" holeThe old pin must be machined out. If you are not a competent machinist, then you will have to employ the services of a machine shop. In this event you are probably better off buying a new steering shaft ACS068.
Product Number: ACS3048
Instructional video demonstrating a complete steering gearbox replacement on a Ford 8N. The same technique can be used on a Ford Jubilee, NAA, 600, 800, 2000 4-cyl and 4000 4-cyl.
Related Products:Ford 8n Steering Box | 8n | Stearing
…PTO shaft to go to the rear of the tractor. It had an over center PTO gear box and lever that is gone. This is what the later model tractors had. * The tractor is all different behind the motor. The light bracket, amp box, choke lever, bell housing, starter, axles and housing. The axles were bigger…
Related Products:Farmall M Live Hydraulic Pump | Farmall M Power Steering | M&w
Ford - Fits: [ Golden Jubilee, Jubilee, NAA (all 1953 to 1954) ]; Replaces: NAA3503B This gearbox is shipped dry and needs to have 90 weight oil added before using. Must reuse old pitman arms.
Product Number: FDS3219
Ford - Fits: 8N (Up to SN: 216989, early 4 bolt side sector steering gear box.); Replaces: 8N3270C, 8N3305A, 8N3314D, NAA33271A * Adjustable from approximately 36" to 39-1/2" center-to-center tie rod studs.* Tie rod ends are sealed and permanently greased* Grease zerks are cosmetic…
Product Number: FDS2482