…UT, V, ZA, ZAE, ZAN, ZAS, ZAU, ZB, ZBE, ZBN, ZBU, ZTI, ZTS, ZTU, 2 Star, 335, 445, 4 Star, 5 Star Oliver - Fits: [ 77, 88 (with start button) ]; Replaces: 1K7354B 2 spade terminals. For use in 0.800" diameter hole. This switch does NOT fit 154, 184, 185. This is the same switch sold by the OEM.
Product Number: IHS760
Allis Chalmers - Fits various models Case - Fits various models Cockshutt - Fits various models Ford - Fits various models International / Farmall - International / Farmall - Fits various models Fits John Deere - Fits various models Massey Ferguson - Fits various models Massey Harris - Fits various…
Product Number: ABC400
…IH switch. On original IH switch, there were 2 separate wires that went to the BAT terminal on the new switch there are 2 BAT terminals, just hook one wire to each terminal. WIRE TERMINALS MUST BE CHANGED TO PLUG IN TERMINAL ENDS) ], Wheatland: 400 ( This replaces the 4 terminal IH switch. On…
Product Number: ACS288
…(16), Pony (1953 and up), 50; Replaces: 851846M1 MH Note: Instead of left hand rotation to turn lights on, this is all right hand rotation. * Includes 2 keys.* Switch has 3 Screw type terminals* 0.625" diameter threaded end for dash opening* 5/8" - 27 UNS threaded stem.
Product Number: ABC116
…Fits: Golden Jubilee, Jubilee, NAA * This kit makes a simple 1 wire hookup, (For negative ground systems)* Instruction sheet included on how to switch from positive ground to negative ground* Includes 63 amp 1 wire alternator and mounting brackets* Includes charging harness only, (reuse the original…
Product Number: FDS1102
…switch is for 15 amps and has 5 terminals. It includes the black plastic knob with 10-24 NC threads. The threaded stem measures 7/16 - 20 UNF. This will only fit listed models that are using a voltage regulator. --- Note: Switch manufactures consider "OFF" as 1 position. *** This is a 12Volt Switch…
Product Number: JDS631
…For tractors with regulators only:---SOME SWITCHES HAVE A DIFFERENT APPEARANCE THAN THE ORIGINAL SWITCHES, BUT ONCE INSTALLED ONLY THE HANDLE IS VISIBLE WHICH IS IDENTICAL TO ORIGINALS. FOR TRACTORS WITH SWITCH ON REAR LIGHT. 0.670" O.D. thread Note: Switch manufactures consider 'OFF' as 1 position.…
Product Number: IHS595
Avery - Fits: V (ALL with CUTOUT); Replaces: VT508 Fits John Deere - M, MC, MI, MT (ALL with CUTOUT); Replaces: AM357T, AM812T 5 position switch with 5 Screw terminals. Includes JDS668 lever. Rated for 30 Amps. For tractors updated with a voltage regulator, please use JDS666.
Product Number: JDS770
Fits John Deere - [ 3010, 4010 (DSL) ], 3020 (DSL; up to sn 67999), 4020 (DSL; up to sn 90999), 5010 (up to sn 7999), 8020; Replaces: AR26557 This is a genuine Cole Hersee switch. They are the OEM manufacturer. This switch has 6 spade terminals and a 5/8" - 32 UN threaded stem.
Product Number: JDS828
…Massey Harris - Fits various models Minneapolis Moline - Fits various models Oliver - Fits various models * Fits AG and light industrial equipment.* For ignition switch applications, this can be used on battery ignition systems only.* Note: Switch manufacturers consider OFF as one position.
Product Number: ABC398