…end - sn 528163 - 533422); Replaces: 880009M92, 881883M91 * Fits models listed with adjustable wide front ends using Drilled style tierod.* This tierod end measures 15" from the end to the grease zerk and 0.742" in diameter w/ 6 drilled locating countersunk blind holes* It has a…
Product Number: ABC390
…- Fits various models Massey Harris - Fits various models Minneapolis Moline - Fits various models Oliver - Fits various models White - Replaces: 1E6957 ** ALSO FITS SWARTZ TIERODS ** Base x Height x Hole ID --- 1.675 X .900 X .625---Specify size when ordering: also fits same as IHS894 tierod Product Number: ABC368
…wide front axles, If you are not sure of your axle please call or E-mail us for the differences. This tierod assembly tapered ball stud measures 0.675" to 0.762" at the widest point of the taper shaft, w/ 5/8-18" thread. The tierod is adjustable to a maximum of 34-1/4" and a minimum of 20-7/8"
Product Number: IHS894
…TO20, TO30; Replaces: 180359M91, TO3341 This is a complete tierod assembly including the tierod ends, clamps and the drag link tube. There are 2 used per tractor, but they are sold individually. The tube length is 32-1/2". This tierod assembly is designed for an adjustable style steering gear…
Product Number: FDS393
International / Farmall - Fits: [ H, M, MD, MTA, Super H, Super M, Super MD, Super MDTA, Super MTA (w/ Factory IH wide front & tierods BEHIND center axle ) ], [ 300, 350, 400, 450 (Farmall, w/ Factory IH wide front & tierods BEHIND center axle ) ], [ 460, 560 (Farmall, w/ Factory IH wide…
Product Number: JDS052
…length. This tierod may also be used on CA with adjustable wide front axle, but you must use a taper reamer on the steering arms. On the CA you must ream the existing steering arms with 7 degree taper. The inside tierod measures 16 - 3/8" long from the grease fitting to the end. The rod measures…
Product Number: ACS066
…utility only with standard axle.) ]; Replaces: 87048406, 8N3287, 957E3287, C5NN3N295B, NAA3270A, NAA3290A, NAA3307B, NAA3314B, NAA33271A * Adjustable from approximately 40" to 46-1/2" center-to-center tierod studs.* Tierod ends are sealed and permanently greased* Grease zerks are cosmetic only.
Product Number: FDS2497
…Fits: 8N (Up to SN: 216989, early 4 bolt side sector steering gear box.); Replaces: 8N3270C, 8N3305A, 8N3314D, NAA33271A * Adjustable from approximately 36" to 39-1/2" center-to-center tierod studs.* Tierod ends are sealed and permanently greased* Grease zerks are cosmetic only.
Product Number: FDS2482
…(Used as an outer tierod end with standard non-adjustable front axle. Also fits adjustable axles as an inner tierod end.), MI (Used as an outer tierod end), 1010 (Used as an inner tierod end on some early models), [ 320, 330, 40, 420, 430, 435, 440 (Used as an inner tierod end) ]; Replaces:…
Product Number: JDS815
Massey Ferguson - Fits: Following with swept back axle only : 230, 235, Ferguson Tractor: TO20, TO30, TO35, MF Overseas (UK built): 35, MF Tractor: 135 (Fits some early production models. Check size before ordering), 35, MF/Overseas: FE35; Replaces: 180391M91, 193733M91 3.594" END TO GREASE ZERK…
Product Number: MFS176
…100, 130, 140, 200, 230 (Outer) ], Super A (Late; sn 318310 and up), Super AV (sn 318310 and up), 2424, 385, 424, [ 454, 485 (SOME) ], 464 (with SWEPT BACK AXLE), 504 (Row-Crop); Replaces: 356540R91 FITS MODELS LISTED WITH AUTOMOTIVE TYPE TIEROD ENDS. 3.062" END TO GREASE ZERK. 11/16 X 18 RH THREAD
Product Number: IHS817
…(SOME, W/ SWEPT BACK AXLE) ]; Replaces: 356544R11 There are two different automotive style tierods used. Please check dimensions before ordering.* 16" end to grease zerk* 0.750" diameter rod* 1/2" diameter thread* Stud taper = 0.560" to 0.630" FITS MODELS LISTED WITH AUTOMOTIVE TYPE TIEROD ENDS
Product Number: IHS819