…USING CAT 2 THREE POINT HITCH) ] This toplink is adjustable from 21-1/4" center to center on the pinholes to 33" center to center on the pin holes. The hole is 1" in diameter. This toplink is a category 2 and has a tube length of 16-3/4".***This TopLink Is A Serviceable Replacement For The Above…
Product Number: FDS346
Allis Chalmers - Fits: D14, D15 (Series I), D17 (Series I and II), WD, WD45 Category 2 --- Leave your drawbar on --- Bolts onto drawbar --- Will fit D15 Series II with no sway block --- D17 Series III with no sway block
Product Number: ACS014
…WD, WD45 Category 1 --- Lift arms = 5/8" Thick X 3" Wide --- Easy to install and remove -- Snap Coupler Drawbar MUST Be Removed To Install, Adjustable Uprights Attach To Snap Couplers (which are not included, or hitch can be bolted to snap couplers) --- Toplink and toplink bracket not included.
Product Number: ACS011
…- Fits: D17, D19, 190, 190XT Category 2--- 1" Thick X 3" Wide, Easy to install and remove -- Snap Coupler Drawbar MUST Be Removed To Install, Adjustable Uprights Attach To Snap Couplers (which are not included, or hitch can be bolted to snap couplers) --- Toplink and toplink bracket not included.
Product Number: ACS013
…1801, 1811, 1821, 1841, 1871, 1881; Replaces: D0NN555D This 3 point lower lift arm is a category 1 and it accommodates 7/8" drawbar or lower link pins. It measures 31-5/8" center to center on the ball. This is the right hand side. If using on a model 1954 and later, please measure…
Product Number: FDS386
Fits John Deere - A (sn 584000 and up), B (sn 186134 and up), G (sn 18700 and up), 50, 60, 70 (with EXPOSED ROCKSHAFT) * Category 1 (3/4" holes)* Top-link is not included
Product Number: JDS028TLB
…TEA20-85, TEF20, TO20, TO30; Replaces: 180359M91, TO3341 This is a complete tie rod assembly including the tie rod ends, clamps and the drag link tube. There are 2 used per tractor, but they are sold individually. The tube length is 32-1/2". This tie rod assembly is designed for an adjustable…
Product Number: FDS393