1-800-234-3280

Welcome to Steiner Tractor Parts

    1 - 24 of 408 Products >
  1. pin
  2. >
  3. all

pin

Sort by:
View: Show: per page
Showing Products: 1 - 24 Total Products: 408

3 Pt Lynch Pin

…AM1752T, DA5883A Massey Ferguson - Fits various models; Replaces: 763672M91 Massey Harris - Fits various models Minneapolis Moline - Fits various models Oliver - Fits various models; Replaces: 104616A For use with all 3-point equipped tractors and/or implements using 7/16" diameter lynch pins.

Product Number: MIS119
Price: $0.95

Swinging Drawbar Pin

…4430 (up to SN: 21269); Replaces: AR32826, AR44189 Rotating handle allows pin to pivot for even wear of shaft. Early factory pins were welded which led to the pin wearing unevenly, and the handle often broke as the pin tried to rotate but the handle bound against the retaining bracket and snapped.*…

Product Number: JDS3734
Price: $26.95
Related Products: John Deere 3020

Inner Hydraulic Lift Control Rod Pin

Ford - Fits: all 1947 through 1964: 2000 4 cylinder, 2031, 2110 4 cylinder, 2111, 2120 4 cylinder, 2121, 2131, 4000 4 cylinder, 4031, 4110 4 cylinder, 4120, 4121, 4131, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820,…

Product Number: FDS3403
Price: $4.50

Drawbar Pin Retainer Plate

…606, 650, 656, 660, 664, 666, 674, 684, 686, 706, 756, 766, 784, 806, 826, 856, 884, 966; Replaces: 132794H1, 491390, 49139D, 57654D, 57655D, 58657D * This drawbar pin retainer plate is zinc plated.* The retainer plate measures 1.480" long, 1" wide and has a 0.377" hole diameter and 0.193" thick.

Product Number: IHS1379
Price: $5.50
Related Products: Farmall M Drawbar | International 484

Piston Wrist Pin Bushing

Ford - Fits: [ 6000, 6100 (both 6-cylinder gas, LP & diesel; through 1967) ], also fits the following 4-cylinder gas, LP and diesel models 1953 - 1964: 2000 4 cylinder, 2031, 2111, 2120 4 cylinder, 2121, 2131, 4000 4 cylinder, 4031, 4110 4 cylinder, 4120, 4121, 4131, 501, 541, 600, 601, 611,…

Product Number: FDS3722
Price: $3.50
Related Products: Ford Bushing

Governor Weight Pin

…or 226 cubic inch Gas engines), Power Unit: W201, W226, W25 Allis Chalmers - Fits: [ D17, WC, WD, WD45, WF, 170, 175 (With 4 cylinder 201 or 226 cubic inch Gas engines) ]; Replaces: Clip: 70207719, 207719, Pin: 70211368, 211368 * Includes 2 clips* 2 used per governor / tractor.* Sold individually.

Product Number: ACS319
Price: $5.65

Long Drilled Pin

Fits John Deere - A, B, G, 50, 60, 70 (with 800 LIFT KIT), LIFT KIT: 801 (LIFT KIT); Replaces: 14779, 45M7030, DA2632A

Product Number: JDS345
Price: $8.95
Related Products: 3 Point Hitch Pins

3 Point Toplink Pin

Allis Chalmers - Fits various models Case - Fits various models; Replaces: B500188 Cockshutt - Fits various models Ford - Fits various models; Replaces: 8178903, C5NN486A International / Farmall - International / Farmall - Fits various models; Replaces: B500188 Fits John Deere - Fits various models;…

Product Number: ABC1429
Price: $4.50
Related Products: Top Link | Top Link Pin | Ford 8n Top Link

3 Pt Toplink Pin

Allis Chalmers - Fits various models Case - Fits various models; Replaces: G16735, K912936 Cockshutt - Fits various models Ford - Fits various models; Replaces: 957E560, C5NN560B International / Farmall - International / Farmall - Fits various models Fits John Deere - Fits various models; Replaces:…

Product Number: ABC1431
Price: $1.95
Related Products: Top Link Pin | 3 Point Hitch Pins | Top Link

Base Engine Kit

…TO35; Replaces: Gasket set: 830689M91, Cylinder kits: 830697M91, Pin bushings: 840708M91 Massey Harris - Fits: all with Z134 Continental gas engine: 50 * Each kit includes (4) sleeves, pistons, pins, piston ring sets, pin retainers, pin bushings, (8) sleeve sealing rings and complete gasket set with…

Product Number: MFS3406
Price: $399.99

Clevis Pin

…1801, 1811, 1821, 1841, 1871, 1881, 2030, 2130, 4030 4 cylinder, 4040, 4130 4 cylinder Massey Ferguson - Fits: TE20, TEA20, TO20, TO30 * Pin ONLY fits the ABC435 style aftermarket brackets.* For the complete assembly see FDS208 or FDS302 depending on the model.* Pin will NOT fit original brackets.

Product Number: FDS305
Price: $4.90

Front Drawbar Pin

…(without fast hitch), 460 (Without fast hitch), 504, 544, 656, [ International Utility: 300, 330, 340, 350 (without fast hitch) ], 460 (Without fast hitch), 504, 544, 656; Replaces: 57654D * Measure the old pin before ordering as two (2) different diameters could be used.* 1-1/8" dia. x 3-1/2" long

Product Number: IHS1377
Price: $13.50
Related Products: Drawbar | Drawbar Front Pin

Pin Only (For Leveling Box Or Leveling Rod)

Ford - Fits: [ Golden Jubilee, Jubilee, NAA, NAB, 2031, 2100, 2111, 2121, 2131, 2150, 2300, 2310, 2600, 2600V, 2610, 2N, 3000, 3055, 3100, 3110, 3120, 3300, 3310, 3330, 3600, 3600V, 3610, 3900, 4000SU, 4031, 4100, 4120, 4121, 4131, 4140, 4200, 4330, 4340, 4410, 4600, 4600SU, 501, 541, 600, 601, 611,…

Product Number: FDS350
Price: $3.95

Lower 3 Pt Arm Support Pin

Ford - Fits: [ Golden Jubilee, Jubilee, NAA, NAB, 2000 3 cylinder, 2000 4 cylinder, 2031, 2100, 2111, 2121, 2131, 2300, 2310, 2600, 2610, 3000, 3300, 3330, 3600, 3600V, 3610, 4000 4 cylinder, 4031, 4100, 4110, 4120, 4121, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651,…

Product Number: FDS462
Price: $24.95

Pin

IH Industrial - Fits: 2404, 2424, 2444 International / Farmall - Fits: 240, 330, 340, 404, 424, 444; Replaces: 368604R11 * 4-9/16" long* 1.245" diameter

Product Number: IHS457PIN
Price: $45.00
Related Products: Front Axle Pin | Ih Front Axle

Steering Pin

Fits John Deere - M, MI, MT, 1010, 320, 330, 40, 420, 430, 435, 440; Replaces: AM1514T, AM1515T Welds into the existing lever shaft.  Sold individually.* 1" overall length* 0.405" shaft diameter* 0.590" diameter stop ring* 0.307" height of taper* Taper = 0.385" to 0.475"

Product Number: JDS1184
Price: $24.50

Drive Pin

JD Industrial - Fits: 500, 600, Loader/Backhoe: 300B, 310, 310A, 310B, 401C, 410, 500A, 500B, 500C, 510 Fits John Deere - 1020, 1030, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2130, 2240, 2440, 2510, 2520, 2640, 2840, 3020, 3120, 3130, 4000, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520,…

Product Number: JDS4380
Price: $3.79

Brake Pivot Pin, Toggle Pin

Allis Chalmers - Fits: B, C, CA, IB; Replaces: 207221, 70207221 * Zinc plated* 0.750"  diameter* 1.625" long* Pin is used with hand brakes and foot brakes

Product Number: ACS1650
Price: $8.50
Related Products: Allis Chalmers B Brakes

Piston Wrist Pin Bushing

…(all gas/LP/diesel with 1.312" wrist pin ) ], [ W400, 400 (both gas/LP, up to engine SN: 163807 with 1.312" wrist pin) ], [ W400, W450, 400, 450 (all diesels with 1.312" wrist pin) ]; Replaces: 45748DA, 45748DAR Fits models with 1.312" diameter wrist pin.* 1.300" I.D.* 1.416" O.D.* 1.524" overall…

Product Number: IHS3754
Price: $10.85
Related Products: Farmall M Piston

Brake Pin Removal Tool

Allis Chalmers - Fits: D17 (up to SN: 42000), WD, WD45, WD45 (diesel) Note: Pin must have at least half of the head remaining for the puller to function properly..

Product Number: ACS3558
Price: $68.45
Related Products: Allis Chalmers Wd45 | Wd45 Brake

Front Axle Support Pin

…811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, [ Golden Jubilee, Jubilee, NAA (if updated to a threaded pin) ]; Replaces: NCA3127A * 1.745" O.D.* 4.500" length* Threaded end* 1953 - 1964* Not for use with heavy duty axleNote: Verify if pin is threaded or plain, as both styles were available.

Product Number: FDS4108
Price: $18.95

Oversized Clutch Pin

Fits John Deere - B, H, 50 (clutch linkage.); Replaces: B178R * This pin is 1/16" oversized to compensate for wear.* Use 1/2" drill to ream original holes.* Two used per tractor; sold individually.

Product Number: JDS1900
Price: $5.99
Related Products: John Deere B Clutch | Clutch

Touch Control Clevis Pin

International / Farmall - Fits: A1, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200; Replaces: 350142R1 This pin has a 1/2" diameter. It measures 1-9/16" total length. It has 1-3/8" usable body length. It has a 3/4" wide head.---2 are used at a time, as many as 6 to 8 can be…

Product Number: IHS836
Price: $8.95

Oversized Clutch Pin

…G, R, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820 2 cylinder, 830 2 cylinder, 840 2 cylinder; Replaces: D1994R  * This clutch linkage pin is 1/16" oversized to compensate for wear. Use 9/16" drill to ream original holes.* Two used per tractor; sold individually* 9/16" diameter*…

Product Number: JDS1902
Price: $8.95
Related Products: John Deere 630 | Clutch | John Deere 530
Did you find this search useful? Yes No
Sort by:
View: Show: per page