1-800-234-3280

Welcome to Steiner Tractor Parts

    1 - 18 of 18 Products >
  1. 12 Volt Starter Switch
  2. >
  3. all

12 Volt Starter Switch

  • 1
Sort by:
View: Show: per page
Showing Products: 1 - 18 Total Products: 18

Neutral Safety Starter Switch (OEM)

…King, 831, 832, 833, 840, 841, 842, 843, 870, 930, 930 Comfort King, 931, 932, 940, 941, 970; Replaces: A20990, G44873 * 35 amp at 12 Volt* 20 amp at 24 Volt* 9/16"-18 UNF-2A thread* 5/16" stem length* 1-1/8" hexNote: Also fits some International Scout II's and Metro's (1958 - 1980);…

Product Number: ABC3967
Price: $16.96

Ignition Switch, Key Switch

…[ 77, 88 (With start button) ]; Replaces: 1K7354B * Fits AG and light Industrial equipment* Also fits SILVER KING Model 42* 3/4" diameter thread* On some applications, must drill hole to 0.800"* 2 wire* Includes 2 keys* For 6 / 12 Volt battery ignition only* For a USA built key switch see IHS760

Product Number: ABC065
Price: $12.99

12 Volt Combination Starter And Light Switch (Without Lever)

Fits John Deere - 50 (SN 5021480 and up), 50 (LP SN: 5024000 & up), [ 520, 620, 720 (Gas / All-Fuel / LP) ], 60 (Gas SN 6026000 and up), 60 (LP SN 6026000 and up), 60 (LP Standard SN 6043000 and up), 60 (Gas Standard SN 6043000 and up), 620 (Orchard up to SN 6222999), 70 (LP), 70 (Standard LP);…

Product Number: JDS980
Price: $49.95

Serviceable 6/12-Volt Combination Switch

Oliver - Fits: Super 66, Super 77, Super 88, Super 99, 66, 77, 88; Replaces: 1K7354A Oliver Industrial - Fits: OC-6 * Ignition & light switch* 5 Screw terminals* 30 AMP Rated* Note; Switch manufactures consider 'OFF' as 1 position.

Product Number: OLS118
Price: $38.95

6 to 12 Volt Conversion on a Ford 8N

Brighten your lights and jump start your tractor easier. Watch our tractor repair tutorial and learn how to do this 6 to 12 volt conversion on a Ford 8N.

6 to 12 volt Conversion Farmall

Instructional video on how to convert your 6 volt Farmall H to a 12 volt system. This is the latest in the Wrenching with Rachel tractor repair series.

Combination Switch Only (Ignition & Light)

…diegrind rear dash opening for resistor clearance); Replaces: 10A2071, 10A3749, 10A971 * 5 screw terminals* Includes mounting nut (JDS669) & washer* Lever not included* 30 amp rating* 5 positions total* Note: switch manufacturers consider "OFF" as 1 position.* Works on 6 or 12 Volt

Product Number: JDS666
Price: $38.95

Switching from 6 to 12 Volt - Antique Tractor Blog

…* Oliver * Contact Us * Tractor Parts * Home * Jr.'s Corner * Switching from 6 to 12 Volt Switching from 6 to 12 Volt 11/13/2009Written by Suzette Thomas 4 Comments If the tractor is a positive ground system it will have to be switched to a negative ground polarity. To do this reverse the battery…

6 Volt to 12 Volt Conversion FAQs - Antique Tractor Blog

…does need to address the starter. Reply * Don B 06/01/2018 - 23:20 Im getting ready to try and convert my JD 40 C to 12 volts for the 2nd time. First time around I cooked the alternator off of a 1976 GMC 350. I changed the coil to the NAPA one recommended switched to 12 volt battery negative ground…

6 Volt to 12 Volt Conversion Help - Antique Tractor Blog

…it has been switched to 12 volts – https://www.steinertractor.com/ABC3551Mini-35-Amp-12-V-Negative-Ground-Alternator-with-Pulley has a built in regulator. The points do not need to be changed. Reply * Ed Dedman 08/24/2018 - 19:35 How about the ignition coil and starter? Starter solenoid? Reply…

Solenoid Starter or Manifold Heater Switch

…solenoid switch); Replaces: 142320A1, A20145, A40795, G44835, G45017 Case Industrial - Fits: [ 310 Crawler, 450, 480 Loader, 580 Loader (12 VOLT ONLY) ] Cockshutt - Fits: Co-Op: E5 (12 VOLT ONLY), Cockshutt: 30 (DIESEL ONLY, 12 VOLT ONLY), [ 50, 540 (12 VOLT ONLY) ], 550 (GAS ONLY, 12 VOLT ONLY),…

Product Number: ABC138
Price: $29.95

12-Volt Starter Solenoid Relay Assembly

…& manifold heater switch for 6000 Diesel.); Replaces: 311006 Ford Industrial - Fits: 1957-1964: 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2130, 4040 * Can be used for manifold heater on Diesel models* 4 posts* Flat Mount* Will not fit those equipped with Lucas starter* Isolated from bracket…

Product Number: FDS282
Price: $19.99

Switches for your International Tractor - Antique Tractor Blog

…Hydro 84; JD 2010, 3010, 4010. View details>> Electrical Parts, Farmall / International, New Parts Hot off the Truck 6 volt to 12 volt, ignition switch, light switch, tractor restoration, voltage conversion Ford Tractors: Difference between a 9N, 2N, and 8N Pro-Tips: Finishing Touches to Make…

Why won't my tractor start?

We will take you thru the steps to determine why your antique tractor will not start. Rachel will go step by step thru the electrical system as well as a few other tips.

Premium Heavy Duty Manual Starter Switch, base mount

…1.83" plunger length* Copper contacts* Works on 6 volt and 12 volt tractors* 100 Amperage* Heavy duty, premium quality!* Also used as a diesel manifold heater switch on some M.H. models.Note: Also fits the Cleveland General, Leader and early Silver Kings (1935 through 1941) with dash mounted switch.

Product Number: ABC4015
Price: $24.50

Universal 12-volt Voltage Resistor (2-terminal style)

…points* 2.0 Ohms of resistance* It does not make any difference which end of the resistor wires to the coil or which end wires to the ignition switch. * Used to step down 12-volt battery.* Limits voltage to coil when using 12-volt battery.

Product Number: ABC366
Price: $7.99
Related Products: Resistor | Abc366 | John Deere Resistor

Indicator Light

switch light; diesel electric start, SN: 7222600 and up), 730 (serviceable as an ignition switch light; diesel Pony or electric start), 820 2 cylinder (serviceable as an ignition switch light; electric start, SN: 8203100 and up), [ 830 2 cylinder, 840 2 cylinder (serviceable as an ignition switch

Product Number: ABC2934
Price: $18.95

Tips for Starting a Tractor in Cold Weather - Antique Tractor Blog

…is characteristic of 6V systems and weak batteries. A 12V conversion can be very helpful. In old tractors that cannot tolerate multi-viscosity oil,( such as 10W-40), switching to a lighter weight for winter eases up the load on the starter and lets cold oil flow where its needed without building…

Did you find this search useful? Yes No
  • 1
Sort by:
View: Show: per page