1-800-234-3280

    1 - 24 of 26 Products >
  1. 3 Point Hitch Kit
  2. >
  3. all

3 Point Hitch Kit

Sort by:
View: Show: per page
Showing Products: 1 - 24 Total Products: 26

3-Point Hitch Kit

…This 3-point hitch kit fits Rowcrops and Utilities without fast hitch. It also allows use of original draw bar. Kit includes (Cat # 1 on tractor end & Cat # 2 on equipment end, and 2 hydraulic 2 way cylinders, but does not include hoses. Please note, this hitch exceeds size…

Product Number: IHS3009
Price: $985.00

3 Point Conversion Kit

Allis Chalmers - Fits: D14, D15 (Series I), D17 (Series I and II), WD, WD45 * Category 2* Leave your drawbar on* Bolts onto drawbar* Will fit D15 Series II with no sway block* Will fit D17 Series III with no sway block

Product Number: ACS014
Price: $575.00

3 Point Hitch Conversion Kit

Allis Chalmers - Fits: B, C * Category I* Complete with 2" x 8" hydraulic cylinder, shortened adjustable top link and bracket* Tractor MUST have hydraulics to use this conversion* Bolts onto drawbar

Product Number: ACS015
Price: $580.00

3 Point Hitch Conversion Kit

…- Fits: D17, D19, 190, 190XT * Category 2* Lift arms = 1" Thick X 3" Wide* Easy to install and remove* Snap Coupler Drawbar MUST Be Removed To Install* Adjustable Uprights Attach To Snap Couplers (which are not included, or hitch can be bolted to snap couplers)* Top link and top link bracket not…

Product Number: ACS013
Price: $485.00

3-Point Hitch Kit

…- Fits: [ C, Super C, 200, 230 (without fast hitch) ] * This 3-point hitch kit is a Cat # 1. Includes brackets to clamp to the axle housing and Cat #1 top link,  Also includes rods and chains for cultivator lift.* If the 3pt drawbar is needed order # FDS022 (sold separately).

Product Number: IHS3014
Price: $750.00

3 Point Hitch Conversion Kit

…- Fits: D14, D15, WD, WD45 * Category 1* Lift arms = 5/8" Thick X 3" Wide* Easy to install and remove* Snap Coupler Drawbar MUST Be Removed To Install* Adjustable Uprights Attach To Snap Couplers (which are not included, or hitch can be bolted to snap couplers)* Top link and top link bracket not…

Product Number: ACS011
Price: $440.00

Stabilizer Kit, Category 1

…- Fits: [ Super 55, 550 ((Bars Only)) ]  * The bars and brackets of this stabilizer kit are coated in red primer.* The bars are Category 1 and are flat bars, not turnbuckles.* The kit includes 2 arms, 2 brackets and the pins.* The arms measure 31-1/2" center to center on the pin…

Product Number: FDS024
Price: $67.99

3 Point Hitch Conversion Kit

…D17, D19 * Category 2* Lift arms: 3/4" x 3" steel* Easy to install and remove* Snap coupler drawbar must be removed to install* Adjustable uprights attach to snap couplers (which are not included), or hitch can be bolted to snap couplers.* Top link and top link bracket…

Product Number: ACS012
Price: $485.00

Original Style 3 Point Hitch Kit (fits John Deere 720, 730)

Fits John Deere - 720, 730 Kit includes: (2) - adjustable uprights (JDS221), (1) - LH lower lift arm (JDS246L), (1) - RH lower lift arm (JDS246R), (1) - LH elephant ear (JDS551), (1) - RH elelphant ear (JDS553), (1) - top link (JDS117), (1) - LH sway block (JDS087), (1) - RH sway block (JDS086), (4)…

Product Number: JDS1424
Price: $1695.00

Drawbar Pivot Pin With Handle, 3 Point Hitch Draft Link Pin

…drawbar pivot pin with handle on models Up to SN: 6213099), 70 (3 point only), 800A (Used as a 3 point hitch draft link pin), Industrial Excavator: 800 (Used as a 3 point hitch draft link pin), LIFT KIT: 801 (Used as a 3 point hitch draft link pin), Special (V): 430 (Used as a drawbar pivot pin with…

Product Number: JDS1488
Price: $27.00

Electronic Ignition Conversion Kit

…- Fits: [ MF20, MF40, 2200, 2500 (Perkins 3 cylinder w/ Delco # 1112457 distributor) ] Massey Ferguson - Fits: [ 135, 150 (Perkins 3 cylinder w/ Delco # 1112457 distributor) ] * Fits tractors with 12 volt negative ground system only.* Fits 3 cylinder Perkins applications with Delco…

Product Number: EIGN12
Price: $169.99

Drawbar Check Chain Kit

…TEA20, TO20, TO30 (When using FDS383 and FDS386 lift arms) ] Our sway chain kit includes:* Left hand sway chain anchor* Right hand sway chain anchor* (2) sway chains* (4) clevises* (2) eye bolts ABC302Our FDS274 drawbar check chain kit is designed to fit our FDS383 and FDS386 lift arms.

Product Number: FDS274
Price: $47.75

Eyelet Assembly Kit

Ford - Fits: [ Golden Jubilee, Jubilee, NAA, NAB, 2000 4 cylinder, 2031, 2100, 2111, 2121, 2131, 2300, 2310, 2N, 3000, 3110, 3120, 3300, 3330, 4000 4 cylinder, 4031, 4100, 4110, 4120, 4121, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701,…

Product Number: ABC302
Price: $7.95
Related Products: Lift Arms | Oliver 550 | Ford 3 Point

Vickers Hydraulic Pump Vane-Rotor Kit

…Replaces: 1E4506, 1E4507, 1ES4505, ES4505 Oliver Industrial - Fits: [ 551, 552 (Early, using 1ES2043 1500 Psi square vane hydraulic pump with 5/8" wide vanes) ] * 5/8" wide vanes* Measure before ordering as 2 different sizes could be used* For 3/4" wide vane and rotor kit, see FDS240

Product Number: FDS239
Price: $380.00

Premium Delco Ignition Tune-Up Kit with Rotor

…90, 950, 99 (W/ Delco Distributor & Clip Held Cap) ]; Replaces: Point Set: MAO612, MAO807, Rotor: MAO758, MA788, Condenser: MAO761, MA616 Delco - Replaces: 1111907, Condenser: 1869704, 1900272, Rotor: 1905590, 1909008, Point Set: 1944374, 1911119 IH Industrial - Fits: [ A-I, I4, I6, T6, U2, U2A,…

Product Number: ABC018
Price: $10.75

Electronic Ignition Conversion Kit, 6 volt positive ground

…Replaces the points and condenser with an electronic module.* Fits distributors with a clip held cap.* Clockwise rotation* Precisely engineered solid state electronics.* Increase spark life and horsepower with a hotter spark to ignite todays fuels.* Never change points again.* Easy installation;…

Product Number: EIGN01
Price: $149.99

Electronic Ignition Conversion Kit, 12 volt negative ground 4 Cyl Delco distributor with clips

…Replaces the points and condenser with an electronic module.* Fits distributors with a clip held cap.* Clockwise rotation* Precisely engineered solid state electronics.* Increase spark life and horsepower with a hotter spark to ignite todays fuels.* Never change points again.* Easy…

Product Number: EIGN19
Price: $139.99

6 Volt to 12 Volt Conversion Help - Antique Tractor Blog

…to use different points Reply * Lisa Warren 02/12/2018 - 09:08 You will not use the voltage regulator once it has been switched to 12 volts – https://www.steinertractor.com/ABC3551Mini-35-Amp-12-V-Negative-Ground-Alternator-with-Pulley has a built in regulator. The points do not need to be…

Sway Chain Assembly

Fits John Deere - [ A, B, G, 50, 60, 70 (All with 800, 800A or 801 factory 3-point hitch) ]; Replaces: 14779, 31602A, 31606A, 331603A, DA2632A, DA4560A, RV695A Our sway chain kit includes:* Chain* Large clevis (JDS346) with drilled pin (JDS345) and cotter pin * Small…

Product Number: JDS344
Price: $49.95
Related Products: 3 Point Hitch John Deere

Short Drilled Pin

Fits John Deere - A, B, G, 50, 60, 70 (with 800 LIFT KIT), LIFT KIT: 801 (LIFT KIT); Replaces: DA4560A, RV695A * The pin attaches the drawbar chain to the draft link* 2 used per John Deere 700, 800A and 801A 3-point hitch* Included with the JDS348 small clevis* Included with the JDS344 sway chain…

Product Number: JDS347
Price: $6.95
Related Products: 800 Hitch | 3 Point Hitch Pins

Large Clevis

Fits John Deere - A, B, G, 50, 60, 70 (with 800 LIFT KIT), LIFT KIT: 801 (LIFT KIT); Replaces: 14779, Clevis: 31606 A, 45M7030, DA2632A Our clevis fits John Deere tractors equipped with a 800, 800A or 801 factory 3-point hitch. This clevis includes the drilled pin (JDS345). This JDS346 large clevis…

Product Number: JDS346
Price: $26.95

Small Clevis

Fits John Deere - A, B, G, 50, 60, 70 (with 800 LIFT KIT), LIFT KIT: 801 (LIFT KIT); Replaces: Clevis: 31603A, DA4560A, Pin: RV695A Includes our JDS347 short drilled pin and cotter pin This is included as a component of our JDS344 sway chain assembly. 

Product Number: JDS348
Price: $14.95
Related Products: Clevis | Jds348

Long Drilled Pin

Fits John Deere - A, B, G, 50, 60, 70 (with 800 LIFT KIT), LIFT KIT: 801 (LIFT KIT); Replaces: 14779, 45M7030, DA2632A

Product Number: JDS345
Price: $8.95

Summer 2010 - New Parts Update - Antique Tractor Blog

…Deere. We are excited to add USA made economy carburetor repair kits. Many of these kits include extra bowl gaskets which would allow one kit to fit various applications. Also available are our John Deere OEM style 3-point hitch kits. Take a moment to open this flyer and enjoy flipping through the…

Did you find this search useful? Yes No
Sort by:
View: Show: per page