What are you looking for?
1-800-234-3280

Your existing login and password will work on the new site. If you experience issues with login, reach out to login@steinertractor.com for assistance.

    1 - 15 of 15 Products >
  1. Clutch Pin
  2. >
  3. all

Clutch Pin

  • 1
Sort by:
View: Show: per page
Showing Products: 1 - 15 Total Products: 15

Step 6 - Assembly - Clutch Lever & Pivot Pin

John Deere Hand Clutch Repair Video Series - Step 6 - Assembly - Clutch Lever & Pivot Pin

Oversized Clutch Pin

…- A, D, G, R, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820 2 cylinder, 830 2 cylinder, 840 2 cylinder; Replaces: D1994R  * This clutch linkage pin is 1/16" oversized to compensate for wear. Use 9/16" drill to ream original holes.* Two used per tractor; sold individually* 9/16"…

Product Number: JDS1902
Price: $8.95

Oversized Clutch Pin

Fits John Deere - B, H, 50 (clutch linkage.); Replaces: B178R * This pin is 1/16" oversized to compensate for wear.* Use 1/2" drill to ream original holes.* Two used per tractor; sold individually.

Product Number: JDS1900
Price: $5.99
Related Products: John Deere B Clutch | Clutch Linkage

Clutch Pedal Pivot Pin

International / Farmall - Fits: [ 1026, 1206, 1256, 1456, 706, 756, 806, 826, 856 (Fit the following gear drive and HYDROs) ], 1066 (Fit the following gear drive and HYDROs,up to sn 17030), 1466 (Fit the following gear drive and HYDROs, up to sn 12145), 1468 (Fit the following gear drive and HYDROs,…

Product Number: IHS1364
Price: $13.55
Related Products: Clutch Pedal

Clutch Release Yoke Pivot Pin

…Cub LoBoy: Cub Loboy; Replaces: 350948R1 DO NOT START ENGINE WITHOUT CHECKING CLUTCH PRESSURE PLATE FINGER CLEARANCE, FAILURE TO DO SO COULD DAMAGE THE PRESSURE PLATE & THROW OUT BEARING, ADJUST CLUTCH LINKAGE PER INSTRUCTIONS. -------------(WILL NOT FIT 154, 184, 185)------------------------

Product Number: IHS1497
Price: $13.50

Clutch Dog Pin

Fits John Deere - A, AH, AI, AN, ANH, AO, AOS, AR, AW, AWH, [ D, DI (SN: 30400 and up) ], [ G, GH, GM, GN, GW (SN: 13804 and up) ], GP, GPO, GPWT, W111, W113, 60, 620, 630, 70, 70D, 720, 720D, 730, 730D, 80, 820 2 cylinder, 830 2 cylinder; Replaces: D355R 0.495" diameter, 2.500" usable length. 3…

Product Number: JDS2581
Price: $10.00

Clutch Dog Pin

Fits John Deere - B (Late; SN: 201000 and up), [ BN, BNH, BWH, BWH40 (SN: 201000 and up) ], 50, 520, 530; Replaces: B2352R 0.431" diameter, 2.000" usable length. 3 used per tractor, sold individually.

Product Number: JDS2601
Price: $11.65
Related Products: John Deere 530

Front Clutch Rod Clevis Pin

IH Industrial - Fits: all with gear drive only: 2706, 2756, 2806, 2856 International / Farmall - Fits: all with gear drive only: 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21206, 21256, 21456, 2826, 4100, 4156, 4166, 4186, 706, 756, 766, 806, 826, 856, 966; Replaces: 382492R1, 382492R2 * 1.400"…

Product Number: IHS3619
Price: $12.50

Torque Amplifier Clutch Control Rod Pin

International / Farmall - Fits: MTA, Super MTA, Farmall: 300, 350, 400, 450, 460, 560, International: 560, 660, Wheatland: 400, 450; Replaces: 359918R1 The dimensions of this pin are: 2.125" overall length, 0.497" O.D. end and 0.558" O.D. shoulder.

Product Number: IHS3081
Price: $13.50

Clutch Dog or Hydraulic Breakaway Pin

pin) ], [ B, BI, BN, BNH, BW, BW40, BWH, BWH40 (up to SN: 209999; used as a clutch dog pin) ], [ H, HN, HW, HWH (used as a clutch dog pin) ], [ 4520, 4620, 7020 (used as a pressure plate finger pin) ]; Replaces: B146R, R43388 * 0.433" diameter* 2.343" usable lengthWhen used as a clutch dog pin: 3…

Product Number: JDS2593
Price: $8.80
Related Products: John Deere B Clutch

Clutch Disc with riveted lining

…- R (2 used), 80 (3 used), [ 820 2 cylinder, 830 2 cylinder (2 Cylinder - 3 used) ], 840; Replaces: AR1052R, AR403R, RE29785 * 9.250" outside diameter (O.D.)* 0.372" thick* (3) 5/8" diameter holes to slide over the R1869R pins* When assembling, the discs slide OVER the pins NOT the T-bolts.

Product Number: JDS1027
Price: $101.75
Related Products: John Deere 80 Clutch | John Deere R

PTO Over Running Clutch 1-1/8" - 1-3/8"

…Female To 1 3/8" Male* 6 Spline* Must have existing hole in pto shaft for roll pin.* For tractors up to  75 horsepower*  6 3/4" overall length*  Includes  2" x 5/16 O.D. roll pin and grease zerk*  May have to shorten equipment drive shaft to…

Product Number: MIS118
Price: $62.35

PTO Over Running Clutch 1-3/8" - 1-3/8"

…6 Splines* For use on tractors with up to 75 Horsepower*  6-3/4" overall length* Must have existing hole in pto shaft for roll pin.* Includes 2" x 5/16 O.D. Roll Pin & Grease Zerk* May have to shorten equipment drive shaft to compensate for the additional length

Product Number: MIS138
Price: $62.35

Brake Repair Allis Chalmers

Brake job on an Allis Chalmers tractor. Step by step instructions on an internal brake repair on an Allis Chalmers letter series tractor.

Hand Crank for Farmall C - Antique Tractor Blog

…Crank for Farmall C 03/26/2015Written by Suzette Thomas 1 Comment Finally a hand crank for tractors with wide front ends. Our new IHS3195 crank with pin and spinner fits Farmall C, Super C, 200, 230, 240, 340, 404, 504. Not only is it used to start your tractor, but it can also turn the engine for…

Did you find this search useful? Yes No
  • 1
Sort by:
View: Show: per page