1-800-234-3280

Welcome to Steiner Tractor Parts

    1 - 23 of 23 Products >
  1. Crankshaft Pully
  2. >
  3. all

Crankshaft Pully

  • 1
Sort by:
View: Show: per page
Showing Products: 1 - 23 Total Products: 23

Oil Seal

…- Fits: Fits 6 cyl gas/dsl as a front crankshaft seal: 262, A, D262, F, G230 AC Industrial - Fits: Fits 6 cyl dsl as a front crankshaft seal: 510, 512, 612, TL10, TL11, TL12, Fits dsl as a front crankshaft seal: HD3 , I60, I600, Fits gas as a front crankshaft seal: AT100 , AT120 , AT60, AT80 , F100,…

Product Number: IHS1307
Price: $8.95

Front Crankshaft Pulley (Ductile iron)

Massey Ferguson - Fits: TE20, TO20, TO30; Replaces: 1750301M1 * Can also be used on applications without loaders.* The pulley measures 2-1/2" overall length and 5-3/4" outside diameter.* It has a 3/4" belt groove width and (4) 7/16" - 14 NC threaded holes for front mount hydraulic pump.* For front…

Product Number: MFS112
Price: $99.95

Crankshaft Pulley

Allis Chalmers - Fits: WD, WD45; Replaces: 227395, 70227395 Double groove power steering with cone shaped allen screw---Fits with and without power steering***Has Drive Lugs For Hand Crank***

Product Number: ACS069
Price: $185.00

Crankshaft Pulley

International / Farmall - Fits: Cub, Cub Loboy; Replaces: 251269R3 * 4-5/8" O.D.* Press fit* This pulley is balanced and has timing marks* For seal use IHS1307Does not fit 154, 184 or 185.

Product Number: IHS019
Price: $48.50

Front Hydraulic Pump Drive Hub Adapter

…- 64) ] Massey Ferguson - Fits: TE20, TO20, TO30 (when using our MFS112 crankshaft pulley); Replaces: : 290421, 500934 * For 8-3/8" long shaft use ABC3867* For 9-3/8" long shaft use ABC1814 * Fits MFS116* Will fit crankshaft pulley ACS089* 1" Spline I.D.* 10 Splines* 2-3/4" Center to Center across…

Product Number: ABC1812
Price: $29.95
Related Products: Abc1812 | Ford 850 | Hydraulic Pump

Crankshaft Drive Pulley For Power Steering (Slides Over Existing Pulley)

Char-Lynn - Replaces: 5515 International / Farmall - Fits: [ M, MTA, MV, Super M, Super MV, Super W6, W6, W6TA, 400, 450 (Gas / LP) ], [ Wheatland: 400, 450 (Gas / LP) ]

Product Number: IHS1420
Price: $79.95

Front Hydraulic Pump Drive Hub Adapter

Ford - Fits: [ 2N, 8N, 9N (Some 1939-1952 when equipped with ABC021 crankshaft pulley.) ]; Replaces: 192161 Measure old pulley bolt spacing before ordering. * 3-3/8" O.D.* 2-3/8" center to center across bolt holes* 1-5/8" center to center (1 hole to the next)* 3/4" spline I.D.* 6 splines*…

Product Number: ABC1809
Price: $42.50

Front Hydraulic Pump Drive Shaft

…2130, 4030 4 cylinder, 4040, 4130 4 cylinder (Fits 1953 - 64) ] Massey Ferguson - Fits: [ Ferguson Tractor: TE20, TO20, TO30 (when using MFS112 crankshaft pulley) ]; Replaces: 195454 * 9-3/8" Length* Pulley end: 1" O.D. x 10 Splines* Pump end: 3/4" O.D.…

Product Number: ABC1814
Price: $45.65
Related Products: Abc1812 | Abc1814 | Ford Front End Loader

Crankshaft Pulley

Ford - Fits: 2N, 8N, 9N; Replaces: 192160, 2N6312  * Can also be used on tractors without loaders to replace the sheet metal pulley.

Product Number: ABC021
Price: $33.95
Related Products: Abc021 | Ford 8n Pulley | Crankshaft Pulley

Crankshaft Pulley

Allis Chalmers - Fits: [ B, C, IB (Serviceable but does not have provisions for hand crank) ], CA, D10 (Up to SN: 3500), D12 (Up to SN: 3000), D14; Replaces: 236741, 70236741, AM4529 * 5" diameter* 5/8" belt width* 2-3/4" center to center across the bolt holes* 7/16" bolt hole…

Product Number: ACS089
Price: $44.95
Related Products: Crankshaft Pulley | Crank Pulley | Hand Crank

Crankshaft Pulley

AC Industrial - Fits: I60, Backhoe: I600 Allis Chalmers - Fits: D10 (SN: 3501 & up), D12 (SN: 3001 & up), D15 (Gas), Forklift: I500; Replaces: 233396, 235043, Set Screw: 902870, 70233396, 70235043, Casting Number: AM4761 * Includes set screw* 5-1/16" pulley diameter* 3/8"…

Product Number: ACS154
Price: $78.50
Related Products: Crankshaft Pulley

Crankshaft Pulley

Allis Chalmers - Fits: G; Replaces: 800220, 70800220 Massey Harris - Fits: Pony; Replaces: 1500005M1, N62K318 Also fits Earthmaster Models C & CH. 5-3/16" O.D.

Product Number: ACS349
Price: $74.95
Related Products: Crankshaft Pulley | N62

Crankshaft Pulley

…251589R91, 6502DX, 6502DA, 9855DX, 9855DAX * Press fit. * Not drilled/tapped for setscrew, (early tractors used a setscrew to retain pulley to crankshaft, customer would have to drill & tap this pulley).* This pulley is balanced and has timing marks.* Pulley is coated with a clear rust…

Product Number: IHS020
Price: $56.50
Related Products: Crankshaft Pulley | Farmall C | Ihs1307

Front Crankshaft Oil Seal

…as a front crankshaft seal), Crawler: Terra Trac (gas Continental engines when used as a front crankshaft seal) Cockshutt - Fits: Co-Op : E2 (For gas Continental engines when used as a front crankshaft seal), [ Cockshutt: 20, 540 (For gas Continental engines when used as a front crankshaft seal) ];…

Product Number: ABC1632
Price: $10.99

Crankshaft - 219, 4 cylinder # AT18030

…1 bolt to retain crankshaft pulley: 1032, 1042, 1052 (all up to engine SN: 76979) ], 3300, 930, 935, 940, 942, 945, 952 JD Industrial - Fits: [ the following with 4-202, 4-219, (4-239 up to engine SN: 769620) diesels & 1.37" (short) nose using 1 bolt to retain crankshaft pulley: 210C, 310C,…

Product Number: JDS310
Price: $398.95
Related Products: Crankshaft Pulley

Main Bearing Set, 0.010" undersize

…or 226535 crankshaft and flanged front thrust bearing) AC Industrial - Fits: Road Grader: D (all gas, LP with U3986, 226526 or 226535 crankshaft and flanged front thrust bearing; up to SN: 5425), [ Rubber Tired Loader: TL10, TL11 (all gas, LP with U3986, 226526 or 226535 crankshaft and flanged…

Product Number: ACS2772
Price: $117.75

Main Bearing Set, 0.020" undersize

…or 226535 crankshaft and flanged front thrust bearing) AC Industrial - Fits: Road Grader: D (all gas, LP with U3986, 226526 or 226535 crankshaft and flanged front thrust bearing; up to SN: 5425), [ Rubber Tired Loader: TL10, TL11 (all gas, LP with U3986, 226526 or 226535 crankshaft and flanged…

Product Number: ACS2774
Price: $117.75

Seal

…than original. (Mounts in final drive axle housing)) ], H (Front Crankshaft Seal, SN 5416 & up, all gas, LP), HV (Front Crankshaft Seal, SN: 5416 & up, all gas, LP), [ O4, OS4, Super H, Super HV, W4, 300, 350 (Front Crankshaft Seal, all gas, LP) ], 130 (Upper Differential Shaft Inner Oil…

Product Number: ABC131
Price: $9.90

Front Hydraulic Pump Drive Shaft

Ford - Fits: [ 2N, 8N, 9N (Some 1939-1952) ]; Replaces: 194354 * Use with ABC1809 adapter* Use with ABC021 crankshaft pulley* Measure before ordering* 13" Long* 3/4" O.D.* 1 end has 6 splines* Other end has 0.187" keyway* Used with Ford pump drive kits # 19-22, 19-23

Product Number: ABC1820
Price: $36.75

Front Hydraulic Pump Adapter Plate (Drive Hub)

…704812M92, 704812M93 Massey Harris - Fits: 50 (all with Continental & Perkins gas, LP and diesel engines using 3 bolt front pump drive) * 3/4"-10 UNC L.H. thread* 5-1/4" O.D.* 3 bushings with mounting holes 3.465" on center* 4" bolt circleNote: This adapter plate bolts to the crankshaft pulley.

Product Number: MFS3746
Price: $59.95

Oil Seal

…931, 932, 940, 941, 970 (all used as a front crankshaft oil seal) ], [ Cruz Air: 45, 45B (all used as a front crankshaft oil seal) ], [ Excavator : 40D, 40E (all used as a front crankshaft oil seal) ], Industrial: W7C (all used as a front crankshaft oil seal on rubber tired loaders); Replaces:…

Product Number: ABC3212
Price: $12.99

Ball Bearing

…auger wagon), [ Fits following as an elevator motor input shaft bearing, 4 used: 860, 860A (elevating scraper) ] JD Lawn & Garden - Fits: as crankshaft bearings, 2 used: 110, 112, 200, 208, 210, 212, 214, 216 Fits John Deere - [ Fits following as a Pony motor transmission drive shaft bearing:…

Product Number: ABC3437
Price: $5.20

Is your tractor a Cub, Cub LoBoy or model 154, 184, 185, learn the difference. - Antique Tractor Blog

…rewiring. The change came about because of the problem of keeping front crank pulleys from becoming loose and cutting off keyways and damaging the crankshaft. It seems odd that IH model numbers do not run in proper sequence. 154 was first. then 185 and 184 was last. Can be confusing. The tractors…

Did you find this search useful? Yes No
  • 1
Sort by:
View: Show: per page