Welcome to Steiner Tractor Parts
Massey Ferguson - Fits: Ferguson Tractor: TE20 ( with an 80MM engine), TEA20 ( when equipped with the 85 MM series engine and up to SN: 200001 if using starter # 25519 with nose cone covering starter drive (for starters with battery cable on armature housing not on the end brush cap)); Replaces:…
Massey Ferguson - Fits: TE20, TEA20, TO20; Replaces: RH: 181707M1, LH: 181708M1
Massey Ferguson - Fits various models Caution: Inspect all decal pieces before applying to tractor. No refunds on decals if applied to surface and/or if damaged. Store in a cool, dry place. Do not soak in water.
Massey Ferguson - Fits: TE20, TEA20, TO20, TO30
…Harris / Ferguson antique, ferguson, identification, models, parts, restoration, steiner, tractor Allis Chalmers Steering Shaft Tubes Now Available Hot Off the Truck – International Steering Wheel Cap 11 Comments * John Rutherford 06/23/2015 - 20:50 I own a 1954 Ferguson TEA20 tractor that…
…a ferguson 35 that was a one owner in Vermont,an orchard tractor since 1956,it was left to me by the original owner for all the years i helped with the apple crops.Also have a 56 massey harris 50 that i am restoring pretty much a basket case when i got it.Runs good with now ,rebuilt hyd pump and…
…Harris / Ferguson * Minneapolis Moline * Oliver * Contact Us * Tractor Parts * Home * Tractor Stories * Massey Harris / Ferguson * Tractor Photos * tractor restoration * 1950 Ferguson TO-20 1950 Ferguson TO-20 04/11/2017Written by Suzette Thomas 3 Comments My Grandpa bought this 1950 Ferguson TO-20…
Massey Ferguson - Fits: [ 150, 50, 65 (Continental Gas/LP) ], Ferguson: 40 (Continental Gas/LP); Replaces: 1751852M1 * Press fit* 3.538" total length* 4.375" diameter at belt* 0.741" hole diameter* For complete water pump with preassembled pulley please view MFS4032Fits 4 Cylinder Continental Gas/LP…
…830691M91 Massey Harris - Fits: MH Tractor: 50 (Continental Gas Engine) * 4 Cylinder Continental Gas/LP engines only* 0.746" shaft diameter (where pulley presses on)* Will not fit Perkins engines* For complete water pump with pulley please view MFS3019 & MFS4032
Massey Ferguson - Fits: TE20, TO20, TO30 (With Continental Engine); Replaces: 1750300M1 * For use with Continental engines.
Massey Ferguson - Fits: [ TE20, TO20, TO30 (with Continental Gas Engine) ]; Replaces: 830862M91, CASTING NUMBER: Z120K305 * Continental gas engine* Includes gasket
MF Industrial - Fits: [ MF Industrial: 202, 204, 2135, 2200 (4 Cyl Continental Gas) ] Massey Ferguson - Fits: [ TO35, 135, 230, 235, 245 (4 Cyl Continental Gas) ], MF Industrial: 30B (4 Cyl Continental Gas), MF Tractor: 35 (4 Cyl Continental Gas); Replaces: 1750081M1
Massey Ferguson - Fits: [ Continental: 150, 50, F40 (all gas / LP) ]; Replaces: Pulley: 1751852M1, Water pump: 830691M91 * Pump and pulley are assembled, ready to bolt onto the engine.* Impeller is 2-3/4" wide
MF Industrial - Fits: The following with with G176 or G206 Continental gas engines only: 302, 304 Massey Ferguson - Fits: The following with with G176 or G206 Continental gas engines only: 165, 175, 180, 65; Replaces: gasket: 1750079M92, kit: 830768M91, 830768M92, pump: 835615M91, 835615M92
…(TEA-20) used a “Standard” 4 cylinder engine (1948-56) The diesel version version (TEF-20) was introduced in 1951 and was powered by a Standard “20C” engine which is different to the later “23C” used in the 35 models. The British built 35 models used Ferguson…
…/ Ferguson, Tractor Photos, Tractor Stories massey ferguson, new parts for old tractors, steiner tractor parts, tractor restoration National Farm Machinery Show 2014 Tractor Restoration Therapy 1 Comment * Kenton 09/09/2016 - 16:44 I have a 65 Massey diesel with a Wooster power steering pump. I am…
MF Industrial - Fits: [ Industrial: 202, 204, 2135, 2200 (4-cylinder Continental gas) ] Massey Ferguson - Fits: [ TO35, 135, 230, 235, 245, 35 (4-cylinder Continental gas) ], Industrial: 30B (4-cylinder Continental gas); Replaces: pulley: 1750081M1, pump: 830691M91
…440 (Gas, Tractor & Crawler) Fits John Deere - [ 420, 430 (Tractor & Crawler) ]; Replaces: AM3060T, CASTING: M3038T * New water pump; not rebuilt* No exchange is needed* Pulley included* This water pump does not include the back plate.* If back plate is needed, also order JDS2939.
…to address short comings with the factory designed water pumps, Steiner Tractor now offers a redesigned water pump which features a modern unitized seal. The factory designed water pump was based on 1930s technology and pumps with the original design are prone to leaking.
…with US engineers to address short comings with the factory designed water pumps, Steiner Tractor now offers a redesigned water pump which features a modern unitized seal. The factory designed water pump was based on 1930s technology and pumps with the original design are prone to leaking.
Case - Fits: D, DC, DC-3, DC-4, DCS, DEX, DH, DI, DI/NAR, DO, DO-VS, DO/STD, DV; Replaces: Pump Assy.: A28456, Water Pump Body: B4590A, B160AA, 2883AA, 5577A New, not rebuilt. No core charge
Kubota - Fits: L175, L2000, L225, L225DT, L245, L245DT (up to SN: 14146), L245H (up to SN: 1727), L345, L345DT, L345W, Industrial / Excavator: KH10 (up to SN: 51041); Replaces: 15321-73030, 15321-73032, 15321-73410, 15321-73412 * Includes gasketNote: For water pump with 3/8" belt.
…number: A5318R, AA6327R * 3/8" pulley width* New, not rebuilt* No exchange needed* Machined for O-ring style bypass tube This water pump does not include water bypass plug for tractors without a bypass. Customers without a bypass line on their John Deere tractor must purchase plug JDS1831.
Ford - Fits: all 1983 through 2002: 1910, [ 2110, 2120 (both Compact, built in Japan) ]; Replaces: 83940084, SBA145016211, SBA145016540 Includes pulley, gasket, and backing plate. Our water pump also fits Shibaura S455 tractors.