Ford Governor

Sort By:
View:
Show:
per page
Governor Compensating  End & Spring Assembly

Governor Compensating End & Spring Assembly


…1964), Will also fit the following 1953 - 1964 models IF USING flyweight style governor : 600, 620, 630, 640, 650, 700, 740, 800, 820, 840, 850, 860, 900, 950, 960, Jubilee, NAA, NAB; Replaces: NCA99810A Ford Industrial - Fits: [ 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2130, 4030 4 cylinder,…
Product Number: FDS1278
Price: $18.95

Related Products: Minneapolis Moline Governor | Governor Spring | Governor

Governor Repair Kit, Basic

Governor Repair Kit, Basic


Ford - Fits: 2N, 8N, 9N; Replaces: 86979852, B0K12502 This kit includes gasket, lower race assembly, ball bearning, C-clip, shim and 5/8" governor balls.
Product Number: ABC029
Price: $87.20

Related Products: Ford 8n Governor | Ford Governor 9n | Governor

Governor Assembly Complete 3 Arm

Governor Assembly Complete 3 Arm


Ford - Fits: 2N (1939-1947 without proofmeter drive), 9N; Replaces: 86979851, 9N18200C * Includes mounting gasket* 3 arms* Please view ABC028 if you need a 2 arm governor for an 8N
Product Number: ABC027
Price: $235.99

Related Products: Ford Governor 9n | 2n Governor | Ford 8n Governor

Governor Internal Centrifugal Assembly

Governor Internal Centrifugal Assembly


Ford - Fits: 1939 - 1952: 2N, 8N, 9N; Replaces: Assembly: 9N8N18179CA, Balls: 358081S, Base: 9N18194, Bearing: 9N18192 , Bushing: 9N18184, Race: 9N18188B, Shaft: 8N18179A, 9N18179A Simple installation:* Unbolt the governor and remove the one retaining screw. Take the old assembly out of the housing…
Product Number: FDS3770
Price: $149.95

Related Products: Tachometer Cable International | 8n Governor | Farmall Governor

Govenor Repair Kit, Complete

Govenor Repair Kit, Complete


Ford - Fits: 2N, 8N, 9N; Replaces: CAPN12502A * Kit includes:* lower race assembly* shaft assembly* upper race assembly* ball bearing assembly* drive shaft ball stop shim* 5/8" governor balls* bushings* gasket* dust seal* C-clip
Product Number: ABC030
Price: $166.30

Related Products: Ford Governor 9n | Governor | Ford 2n Governor

Governor Compensating Spring

Governor Compensating Spring


Ford - Fits: Golden Jubilee, Jubilee, NAA; Replaces: NAA9827B Mounts between bellcrank and underneath battery tray. Bare finish.
Product Number: FDS1921
Price: $5.95

Related Products: Naa Spring | Governor Spring

Governor Compensating Spring

Governor Compensating Spring


Ford - Fits: Fits the following gas or LP models 1954 thru 1964: 2000 4 cylinder, 2031, 2111, 2120, 2131, 4000 4 cylinder, 4031, 4120, 4121, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851,…
Product Number: FDS1917
Price: $5.95

Related Products: Governor Spring | Ford 871 | Govenor

Throttle Control Rod (governor to carburetor)

Throttle Control Rod (governor to carburetor)


Ford - Fits: [ Golden Jubilee, Jubilee, NAA, NAB, 2000 4 cylinder, 2031, 2110, 2111, 2120, 2131, 4000 4 cylinder, 4031, 4110, 4120, 4121, 4131, 4140, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850,…
Product Number: FDS2007
Price: $14.95

Related Products: Ford Throttle | Throttle Rod | Throttle

Governor Assembly Complete 2 Arm

Governor Assembly Complete 2 Arm


Ford - Fits: 8N (1947-1952 with proofmeter drive); Replaces: 8N18204B * Can be used on older 8N tractors without the tachometer as the drive end has a cap to cover the tach cable drive.* Includes mounting gasket* 2 arms* Please view ABC027 if you need a 3 arm governor for a 2N or 9N.
Product Number: ABC028
Price: $239.99

Related Products: Ford 8n Governor | Ford 8n Proofmeter Cable | Ford Tach Drive

Engine Gasket Set

Engine Gasket Set


…Replaces: 309553, 47906360, EAF6051D * For use on early Ford models with 172 C.I engines, 1954 through 1957, with 7/16" head bolts* 4-1/8" bore or less* If you have 1/2" head bolts please see FDS1325* Governor seal is not included but can be ordered separately, please view ABC3969
Product Number: FDS3946
Price: $59.95

Related Products: Head Gasket Set Ford 800 | Head Gasket Ford 172 | 172 Engine

Complete Engine Gasket Set

Complete Engine Gasket Set


Ford - Fits: Following Gas & LP Models : 2000 4 cylinder, 2031, 2111, 2121, 2131, 4000 4 cylinder, 4121, 4140, 501, 541, 600, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 741, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 940, 941, 950, 951, 960, 961, 971,…
Product Number: FDS1325
Price: $87.10

Related Products: 172 Engine | Ford Cylinder Head | Ford 600 Head Gasket

Throttle Control Linkage

Throttle Control Linkage


Ford - Fits: [ 2N, 8N, 9N (1939-1952) ]; Replaces: 9N9818A * Governor to carburetor throttle shaft.
Product Number: FDS156
Price: $18.90

Related Products: Ford Throttle | Ford 8n Throttle | Throttle

Governor Housing Mounting Cover Gasket

Governor Housing Mounting Cover Gasket


Ford - Fits: 2N, 8N, 9N; Replaces: 9N6022
Product Number: ABC290
Price: $1.00

Related Products: 8n Governor Gasket | Ford 8n Governor Gasket | Governor

Oil Seal

Oil Seal


Ford Industrial - Fits: [ the following as a governor shaft lever (mounts in the side of the timing cover): 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2130, 4030 4 cylinder, 4040, 4130 4 cylinder, 4140 4 cylinder (all gas, LP; 1953 through 1964) ] IH Combines - Fits: [ the following as a governor
Product Number: ABC3969
Price: $6.50

Related Products: Governor | Ford Naa | Farmall 200

Base Engine Kit with 3-1/2" Overbore

Base Engine Kit with 3-1/2" Overbore


Ford - Fits: all with 134 C.I. gas, LP series 1953 - 1964: 2000 4 cylinder, 2031, 2110 4 cylinder, 2111, 2120 4 cylinder, 2121, 2131, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 741, 771, Golden Jubilee, Jubilee, NAA, NAB; Replaces: 309519, 309553,…
Product Number: FDS3457
Price: $378.50

Related Products: Ford 600 Engine Overhaul Kit | 1953 Ford Jubilee | Ford 641

Throttle Control Linkage

Throttle Control Linkage


Ford - Fits: 2N (1939-47), 9N; Replaces: 9N9815, 9N9815B * Vertical control linkage.* Governor to throttle control rod.* 10-1/4" length
Product Number: FDS265
Price: $20.60

Related Products: Throttle Linkage | 9n | Ford Throttle


Sort By:
1 - 16 of 30
Show:
per page

All content and images © Steiner Tractor Parts 1660 S. M-13 Lennon, MI 48449 Ph: 800-234-3280 - All Rights Reserved