Grease Fittings

Sort By:
View:
Show:
per page
Chrome Steel Ball Kit (for steering worm shaft)

Chrome Steel Ball Kit (for steering worm shaft)


…Replaces: 452480A * Also fits Earthmaster tractors (20 used), replaces # 57621* Priced and sold as 11-piece kit.* 2 or more kits used per tractor.* 5/16" chrome steel, Grade 25* Also fits 2010 thru 9620T in numerous applications.* For steering applications, install by greasing the race to retain the…
Product Number: ABC2962
Price: $8.50

Related Products: Steering Bearing | John Deere Mt | International 300 Utility

Rear axle shaft inner oil seal (pair)

Rear axle shaft inner oil seal (pair)


…- Fits: 2N, 9N Massey Ferguson - Fits: TE20, TO20 * This is an improved differential seal which stops leakage from differential into the brakes* Installs without pulling axle bearing* Slides on the axle and taps into place at lip of bearing retainer* Must pack the wheel bearings with grease when…
Product Number: ABC382
Price: $16.50

Related Products: Ferguson Axle Seal | Rear Axle Oil Seal | 9n Ford Brakes

Outer Tie Rod End, Notched

Outer Tie Rod End, Notched


…(SOME, W/ SWEPT BACK AXLE) ]; Replaces: 356544R11 There are two different automotive style tie rods used. Please check dimensions before ordering.* 16" end to grease zerk* 0.750" diameter rod* 1/2" diameter thread* Stud taper = 0.560" to 0.630" FITS MODELS LISTED WITH AUTOMOTIVE TYPE TIE ROD ENDS
Product Number: IHS819
Price: $49.30

Related Products: Farmall A Tie Rods | Farmall 130 | Tie Rod End

Short Tie Rod End, LH Thread

Short Tie Rod End, LH Thread


Fits John Deere - [ 520, 530 (With factory square tube wide front axle. ) ], [ 620, 630, 720, 730 (With factory square tube wide front axle. Can also be used on Standard models as a tie rod end or drag link end.) ], [ 820 2 cylinder, 830 2 cylinder (Used on Standard models as a tie rod end or drag…
Product Number: JDS791
Price: $30.75

Related Products: John Deere Tie Rod End | Tie Rod

Throwout Bearing With Release Carrier

Throwout Bearing With Release Carrier


International / Farmall - Fits: 154, 185; Replaces: 404671R1 ***Please note this will not fit a Cub LoBoy 184*** 10-32 GREASE ZERK INCLUDED---
Product Number: IHS785
Price: $68.95

Related Products: Cub Loboy 154 | Farmall Cub | Throw Out Bearing

Threaded Tie Rod End

Threaded Tie Rod End


…- Fits: [ C, Super C, 100, 130, 140, 200, 230 (Outer) ], Super A (Late; sn 318310 and up), Super AV (sn 318310 and up), 385, 424, [ 454, 485 (SOME) ], 464 (with SWEPT BACK AXLE), 504 (Row-Crop); Replaces: 356540R91 FITS MODELS LISTED WITH AUTOMOTIVE TYPE TIE ROD ENDS. 3.062" END TO GREASE ZERK.…
Product Number: IHS817
Price: $24.95

Related Products: Tie Rod End | Farmall A Tie Rods | Ih 424 Tie Rod

Steering Column Cover Kit

Steering Column Cover Kit


Ford - Fits: 2N, 9N; Replaces: 9N3669 This chrome cover has a hole for the grease fitting as well as the spring and felt seal.  
Product Number: FDS408
Price: $17.95


Steering Shaft Support Knuckle

Steering Shaft Support Knuckle


International / Farmall - Fits: Cub, Cub LoBoy: Cub Loboy; Replaces: 350902R1, 350902R2, Serviceable but need to bore out hole drive type grease fitting: 350902R3 * Will not fit 154, 184 or 185.
Product Number: IHS844
Price: $28.95


Universal Steering Joints Repair Kit

Universal Steering Joints Repair Kit


Allis Chalmers - Fits: [ RC, WC, WD (Must Redrill pin holes to Fit shaft) ], WD45 (Gas & Diesel Must Redrill pin holes to Fit shaft); Replaces: 202152, 70202152 * 7/8" and 1" Dia shaft* 750 Diameter U-Joint Caps* Includes: Yokes, pins, and grease fitting* For Heavy Duty applications see…
Product Number: ABC167
Price: $98.95

Related Products: Allis Chalmers Wd | U Joint | Steering Joint

Universal Steering Joints Repair Kit

Universal Steering Joints Repair Kit


…WD45 (MUST GRIND YOKES FOR CLEARANCE on Gas & Diesel); Replaces: 224825, 70224825 Check Measurements Before Ordering.* 0.936" Diameter U-Joint caps* 7/8" & 1" Diameter shaft* Includes: Yokes, pins and grease fitting* Heavy duty, loader use* For regular duty use see ABC167
Product Number: ABC280
Price: $139.50

Related Products: U Joint

Tie Rod (2 Piece)

Tie Rod (2 Piece)


…steering arms with 7 degree taper. The inside tie rod measures 16 - 3/8" long from the grease fitting to the end. The rod measures .782" in diameter. The outer tube measures 17 - 3/8" long from the grease fitting to the end and the outside diameter of the tube measures 1.56". The tie rod end tapers…
Product Number: ACS066
Price: $71.50

Related Products: Allis Chalmers Tie Rod | Tie Rod End | Tie Rod

Throwout Bearing -- Fits Farmall Cub, & Cub Loboy

Throwout Bearing -- Fits Farmall Cub, & Cub Loboy


…could damage the pressure plate and throw out bearing.* Throw out bearing must be perpendicular NOT tilted.*  Grease throw out bearing and adjust clutch linkage per instructions.* No refund on parts damaged from improper adjustments.* Will  NOT fit 154, 184, 185
Product Number: IHS015
Price: $49.95

Related Products: Farmall Cub Clutch | Throw Out Bearing | Farmall Clutch Release Bearing

Farmall Fan Assembly -- Fits Farmall A, B, C, Super A

Farmall Fan Assembly -- Fits Farmall A, B, C, Super A


…AV-1; Replaces: 131489C91, 70136D, 70212D * Also fits PLYMOUTH & Early SILVER KINGS w/ IXB Hercules flathead engines* 15 1/2" Overall fan diameter* 4" Fan pulley Diameter* 3 5/8" Generator Pulley Diameter* For Later IH Sn: tractors use IHS2081* Improved Sealed Bearing, No Need To Grease
Product Number: IHS142
Price: $81.65

Related Products: Ihs142 | Farmall A Fan Assembly | Ihs2081

Tie Rod Assembly, Draglink Assembly (L/H)

Tie Rod Assembly, Draglink Assembly (L/H)


Ford - Fits: 8N (Up to SN: 216988 early 4 bolt side sector steering gear box.); Replaces: 8N3270C, 8N3305A, 8N3314D, NAA33271A * Adjustable from approximately 36" to 39-1/2" center-to-center tie rod studs.* Fits 1947-1949* Tie rod ends are sealed and permanently greased* Grease zerks are cosmetic…
Product Number: FDS2482
Price: $94.95

Related Products: Tie Rod | Drag Link | Tie Rod 8n

Tie Rod Assembly, Draglink Assembly (R/H)

Tie Rod Assembly, Draglink Assembly (R/H)


Ford - Fits: 8N (Up to SN: 216988 with early 4 bolt side sector steering gear box); Replaces: 8N3270C, 8N3304A, 8N33315, NAA33271A * Adjustable from approximately 36" to 39-1/2" center-to-center tie rod studs.* Fits 1947-1949* Tie rod ends are sealed and permanently greased* Grease zerks are…
Product Number: FDS2487
Price: $94.95

Related Products: Tie Rod 8n | Drag Link | Draglink

Threaded Inner Tie Rod End

Threaded Inner Tie Rod End


fit  SWARTZ, NORDEN, SPEECO, Etc.aftermarket wide front axles, If you are not sure of your axle please call or E-mail us for the differences.* 1" Threaded R/H, 16 THREAD*  3.750 From threaded end to grease zerk* Individual tie rod end will not fit H thru 450 as…
Product Number: IHS110
Price: $21.75

Related Products: Tie Rod End | International 460 Tie Rod | Tie Rod


Sort By:
1 - 16 of 32
Show:
per page

All content and images © Steiner Tractor Parts 1660 S. M-13 Lennon, MI 48449 Ph: 800-234-3280 - All Rights Reserved