Welcome to Steiner Tractor Parts
…without bumpers) ]; Replaces: 2N17040A, 9N17040 International / Farmall - Fits: Cub (up to sn 227700), Cub LoBoy: Cub Loboy (up to sn 12575); Replaces: 351010R31, Pin: 351011R1 * This hand crank does not include the spinner.* This crank measures 13-1/4" to the first bend.* 5/8" diameter
Ford - Fits: [ 2N, 8N, 9N (1939-52 Serviceable for models without bumpers) ]; Replaces: 2N17040A, 9N17040 International / Farmall - Fits: Cub (up to sn 227700), Cub LoBoy: Cub Loboy (up to sn 12575); Replaces: 351010R31, PIN: 351011R1 Massey Ferguson - Fits: [ TE20, TO20, TO30 (Without Bumpers) ],…
International / Farmall - Fits: [ C, Super C, 200, 230, 240, 340, 404, 504 (Farmall ROWCROPS only with wide front axle) ]; Replaces: Pin: 15204D, 352496R93 There is 20" to the first bend on this crank. 3/4" diameter.
International / Farmall - Fits: A, B, BN, Super A, Super AV, 100, 130, 140; Replaces: 350639R91
Allis Chalmers - Fits: G; Replaces: 800168, 800646, 70800646 Includes spinner
Allis Chalmers - Fits: [ B, C, IB (Serviceable but does not have provisions for hand crank) ], CA, D10 (Up to SN: 3500), D12 (Up to SN: 3000), D14; Replaces: 236741, 70236741, AM4529 * 5" diameter* 5/8" belt width* 2-3/4" center to center across the bolt holes* 7/16" bolt hole…
JD Industrial - Fits: Engine: 145 JD Miscellaneous - Fits: Engine: 92 Fits John Deere - M, MC, MI, 40 (40C, 40H, 40S, 40U, 40V, 40W series); Replaces: AM223T, AM629T * 13-3/4" from center of drive pin to the first bend* Drive pin dimensions: 1.50" length x 0.313" length* If you have a…
IH Industrial - Fits: A-I International / Farmall - Fits: A, AV, AV-1, B, BN, [ C, 200, 230, 340, 404, 504 (with TRICYCLE FRONT ONLY) ], Super A (with 113 ENGINE); Replaces: PIN: 15204D, 53385DBX 12-3/4" to first bend. 3/4" diameter. Does not Fit C, Super C, 200, 230, 240, 340, 404 & 504…
International / Farmall - Fits: H, HV, M, MV, Super H, Super HV, Super M, Super MTA, 300, 400, Farmall Rowcrop: 350, 450 (ALL with TRICYCLE FRONT); Replaces: 51544DBX Fits Gas/Lp Only, Will not FIT DIESELS
Fits John Deere - [ A, AH, AN, ANH, AW, AWH (all SN: 477000 to 583999) ], [ B, BN, BNH, BW, BWH, BWH40 (all SN: 60000 to 200999) ], [ G, GH, GM, GN, GW (all SN: 13000 and up) ]; Replaces: AA3032R The overall length of this crank is approximately 4-3/16" long. Note: Must use with B1608R flywheel hub.
Fits John Deere - A (sn 584000 and up), B (sn 201000 and up), 50, 520 (up to sn 5208099), 60, 620 (up to sn 6213099), 70 (Gas); Replaces: AB3580R
Allis Chalmers - Fits: WD, WD45; Replaces: 227395, 70227395 Double groove power steering with cone shaped allen screw---Fits with and without power steering***Has Drive Lugs For Hand Crank***
Allis Chalmers - Fits: B, C, CA; Replaces: 207893, 70207893
Allis Chalmers - Fits: RC, WC, WD, WD45, WF; Replaces: 216933, 70216933, U3972
Fits John Deere - MT, 40 (TriCycle), TriCycle: 420 (Tricycle), Tricycle: 430 (Tricycle); Replaces: AM1126T 8" center of drive pin to 1st bend.
…11/04/2018 - 18:55 Magneto systems also have electric start. My 1949 IH Farmall Cub has a Magneto Ignition and can run without a battery using hand crank to start or with the battery using electric start. Reply Leave a Reply Cancel reply Your email address will not be published. Required fields are…
…seen dishonest sellers use? Tractor Photos, Tractor Repair, Tractor Stories, Wrenching with Rachel antique tractor, purchasing antique tractors Hand Crank for Farmall C Celebrating America’s Farmers with Free Shipping 2 Comments * Matt 03/23/2015 - 09:07 Good tips! I bought an 8n from your dad…
International / Farmall - Fits: Super A (with 123 ENGINE), [ Super C, 200, 230, 240, 340, 404, 504 (with tricycle front end only) ], 100, 130; Replaces: 357750R11 Includes spinner on handle. Measures 16-3/4" to the first bend. The bar stock is 3/4" in diameter. Will not fit C, SUP. C, 200, 230, 240,…
…651, 660, 661, 671, 681, 800, 820, 840, 850, 860, Golden Jubilee, Jubilee, NAA, NAB; Replaces: NCA8200A Ford Industrial - Fits: Following 4 cylinder 1953 thru 1962: 2030 * Primer paint, color may vary* Hand crank hole is elongated* Mounting hardware sold separately* Fit to tractor before painting
Allis Chalmers - Fits: RC, [ WC, WF ((styled)) ], WD, WD45; Replaces: Front Clip: 208443, 70208443, Rear Clip: 220855, 70220855
International / Farmall - Fits: Cub, Cub LoBoy: Cub Loboy (bolts to foot platform by gear shift lever); Replaces: screw: 171573, 351013R1 * Spring steel* 0.218 O.D. mounting holes* 2 used per tractor,* sold individuallyWILL NOT FIT 154, 184, 185
Allis Chalmers - Fits: G; Replaces: 800068, 70800068
…Home * New Parts Hot off the Truck * Farmall / International * Hand Crank for Farmall C Hand Crank for Farmall C 03/26/2015Written by Suzette Thomas 1 Comment Finally a hand crank for tractors with wide front ends. Our new IHS3195 crank with pin and spinner fits Farmall C, Super C, 200, 230, 240,…
International / Farmall - Fits: 1086, 1486, 1586, 3388, 3588, 3788, 5088, 5288, 5488, 6388, 6588, 6788; Replaces: 1272623C1, 71388C1 * Bolt style* Right hand