Implements

Sort By:
View:
Show:
per page
3 Point Conversion With Top Link Bracket

3 Point Conversion With Top Link Bracket


…Deere - A (sn 584000 and up), B (sn 186134 and up), G (sn 18700 and up), 50, 60, 70 (with EXPOSED ROCKSHAFT) * It is designed for Category 2 implements, but will work on category #1 by using (2) ABC1433 reducer bushings . We sell this complete with all brackets, including the Category 1 top link…
Product Number: JDS028
Price: $749.50

Related Products: 3 Point Hitch John Deere | Power Trol | John Deere 60 3 Point Hitch

Electrical Outlet Socket

Electrical Outlet Socket


…- Fits various models; Replaces: AM2049T Massey Ferguson - Fits various models; Replaces: 1013302M91 Massey Harris - Fits various models Minneapolis Moline - Fits various models; Replaces: 10A4974 Oliver - Fits various models Replaces: 1K-7365, 1KA7365 2 plated brass pins, All implements with lights
Product Number: ABC395
Price: $25.75

Related Products: Abc395 | John Deere 40 | 706

3 Pt Lynch Pin

3 Pt Lynch Pin


…Replaces: 763672M91 Massey Harris - Fits various models Minneapolis Moline - Fits various models Oliver - Fits various models; Replaces: 104616A * 0.420" diameter pin* 1-1/2" useable length* 1-1/2" diameter ringFor use with all 3-point equipped tractors and/or implements using 7/16" diameter pins.
Product Number: MIS119
Price: $0.95

Related Products: Ford 8n Top Link | Hitch Pins | Top Link

Special Hex Nut

Special Hex Nut


Fits John Deere - A, B, G, H, MT, 1010, 40 (High Crop), 40 (TriCycle), 420, 430, 50, 520, 530, 60, 620, 630, 70, 720, 730; Replaces: A1892R, AA4963R * 1-1/4" long* 1-1/16" width* 5/8" - 11 NC* Mounts to front and rear of axle housings* Mounts on front for cultivator bracket (on Waterloo built…
Product Number: JDS225
Price: $4.99

Related Products: Axle Nut

Setup, Maintenance & Repair Manual: AC G Implements

Setup, Maintenance & Repair Manual: AC G Implements


Allis Chalmers - Fits: G (Implements Only)
Product Number: REP093
Price: $25.95

Related Products: Allis Chalmers G Manual

Operator Manual Reprint

Operator Manual Reprint


International / Farmall - Fits: Implements (CUB 54 A LEVELING and GRADING BLADE) Operator manuals explain how to operate the tractor. This book is sometimes referred to as an owner's manual and it is a reprint of the original book that came with the tractor.   The operator's manual not only…
Product Number: IH54
Price: $12.95

Related Products: Farmall Cub Clutch

MCD A-192 Plow Owners Manual  ---  Setting Up Instructions / Parts List

MCD A-192 Plow Owners Manual --- Setting Up Instructions / Parts List


International / Farmall - Fits: McCormick Deering: Implements (A-192 Tractor Plow)
Product Number: REP088
Price: $28.95

Related Products: Plow

Owners Product Information Manual

Owners Product Information Manual


…plow 21 different Ferguson implements and accessories.), 9N (Explains basic tractor operation; Ferguson system Ferguson plow 21 different Ferguson implements and accessories.) Massey Ferguson - Fits various models Also useful for other models and brands. Ferguson implements discussed are moldboard…
Product Number: REP1446
Price: $18.95

Related Products: Massey Ferguson 65

3" x 12" Front Wheel With Blank Center

3" x 12" Front Wheel With Blank Center


Allis Chalmers - Fits: G; Replaces: 800047, 70800047 Fits John Deere - JD Miscellaneous (Fits Some JD Implements & Plows) * This front wheel measures 3" wide x 12" diameter. * Rim I.D. is 10.160".* Fits tire size 400x12, 4.50x12, 4.80x12* Not designed for tubeless applications…
Product Number: WHS023
Price: $64.95

Related Products: Blank Rims | Allis Chalmers G Wheel

3 Point Lower Lift Arm

3 Point Lower Lift Arm


Fits John Deere - 520, 530, 620, 630, 720, 730; Replaces: AF2715R, AF2716R Right Hand Will fit original John Deere 3 point hitch assembly.  Compare to the competition!  Ours has the correct angle on the implement end & rebuildable draft link lock.  
Product Number: JDS246R
Price: $239.50

Related Products: 3 Point Hitch John Deere | Lower Lift Arm | John Deere Lift Arm

Styled JD G Operators Manual

Styled JD G Operators Manual


…the GM, which stands for G modern. This allowed John Deere to raise the price during World War II which was a time when the Federal government implemented price controls. After the war ended John Deere changed the designation back to "G." Operator manuals explain how to operate the tractor. This…
Product Number: REP113
Price: $49.95


Lay Off Clamp And Wedge Assembly

Lay Off Clamp And Wedge Assembly


International / Farmall - Fits: With Following Implements: Cultivators: 144, 201, 244, 252, 254, 254A, 452, 647, 652; Planters: 173A, 174A, 184, 185, 186, 188, 284; Fertilizer Units: 214, 216, 217, 417, 426, 617: A, B, BN, C, Cub, Super A, Super C; Replaces: 29601BA 1 1/4" Hole Dia. ** May also fit…
Product Number: IHS025
Price: $39.95

Related Products: Fertilizer | Farmall Cultivator Parts

Wedge Only

Wedge Only


International / Farmall - Fits: With Following Implements: Cultivators: 144, 201, 244, 252, 254, 254A, 452, 647, 652; Planters: 173A, 174A, 184, 185, 186, 188, 284; Fertilizer Units: 214, 216, 217, 417, 426, 617: A, B, BN, C, Cub, Super A, Super C; Replaces: 1875B
Product Number: IHS026
Price: $9.95

Related Products: Farmall Cultivator Parts

3 Pt Lift Arm Reducer Bushing, Category 2 to Category 1

3 Pt Lift Arm Reducer Bushing, Category 2 to Category 1


…Fits various models Massey Harris - Fits various models Minneapolis Moline - Fits various models Oliver - Fits various models For use on tractors with Category 2 3-point hitch when switching to category 1 3-point hitch.* 7/8" I.D.* 1-1/8" O.D.* 1-3/8" length* 2 used per implement* Sold individually
Product Number: ABC1433
Price: $2.15

Related Products: Farmall 3 Point Hitch | Case 530 | Third Link

Sediment Bowl Gasket

Sediment Bowl Gasket


…bowl); Replaces: 13193D JD Miscellaneous - Fits: Continental Engines: Y112-618 (When used in various implements, using/ 1.280" long glass bowl), [ Engine: 217, 92 (When used in various implements, using/ 1.280" long glass bowl) ] Fits John Deere - L, LA, LI, LUC, LUS, LUW, M, MC, MI, MT, 1010…
Product Number: ABC039
Price: $1.80

Related Products: Abc039 | Fuel Sediment Bowl Assembly | Ford 8n Sediment Bowl

Fuel Strainer Assembly for gas engine

Fuel Strainer Assembly for gas engine


…369988R91, 38465D, 51066DC, 61782C91 JD Miscellaneous - Fits: Continental Engines: Y112-618 (When used in various implements), [ Engine: 217, 92 (When used in various implements) ] Fits John Deere - M, MC, MI, MT, 1010 (Rowcrop all serial numbers and crawler up to SN: 15782), 320, 330, 40, 420,…
Product Number: ABC092
Price: $27.95

Related Products: Fuel Sediment Bowl Assembly | Farmall Cub Sediment Bowl | Abc092


Sort By:
1 - 16 of 21
Show:
per page

All content and images © Steiner Tractor Parts 1660 S. M-13 Lennon, MI 48449 Ph: 800-234-3280 - All Rights Reserved