Spline Shaft

Sort By:
View:
Show:
per page
Front Hydraulic Pump Drive Shaft

Front Hydraulic Pump Drive Shaft


Ford - Fits: [ 2N, 8N, 9N (Some 1939-1952) ]; Replaces: 194354 * Use with ABC1809 adapter* Use with ABC021 crankshaft pulley* Measure before ordering* 13" Long* 3/4" O.D.* 1 end has 6 splines* Other end has 0.187" keyway* Used with Ford pump drive kits # 19-22, 19-23
Product Number: ABC1820
Price: $36.75

Related Products: Front Hydraulic Pump Drive | Abc1820 | Front Hydraulic Pump Drive Shaft

Front Hydraulic Pump Drive Shaft

Front Hydraulic Pump Drive Shaft


…2130, 335, 3400 * 7/8"-13 spline O.D. both ends* 10.446" overall lengthNote: Check dimensions before ordering as three (3) different lengths were used. * If you need a 11-5/8" length please view FDS3793. * If you need a 13-5/8" length please view FDS3748. Splined coupler is available by special…
Product Number: FDS3755
Price: $29.95

Related Products: Front Pump Shafts | Loader Pump And Shafts | Ford 4000 Hydraulic

Creeper Gear Shaft Spline Drive Gear w/ Bushing

Creeper Gear Shaft Spline Drive Gear w/ Bushing


International / Farmall - Fits: [ 154, 184, 185 (w/ creeper (reduction) drive) ]; Replaces: 532461R1
Product Number: IHS2319
Price: $98.50


Transmission Spline Shaft Oil Seal with retainer & gasket

Transmission Spline Shaft Oil Seal with retainer & gasket


International / Farmall - Fits: [ Cub, Cub Loboy, 154, 184, 185 (all without creeper drive) ]; Replaces: retainer gasket: 350866R1, 528810R2, retainer with seal: 350865R91, 528810R91 * Note: IH changed the original leather seal design to this modern NBR seal. This kit replaces both style seals.*…
Product Number: IHS3439
Price: $23.70

Related Products: Farmall Cub Transmission Seals | Farmall Cub Transmission | Cub

Clutch Shaft And Transmission Spline Shaft With Bushing

Clutch Shaft And Transmission Spline Shaft With Bushing


International / Farmall - Fits: [ Cub, Cub Loboy (NOT 154, 184, Or 185) ]; Replaces: 351534R11, 351534R21
Product Number: IHS006
Price: $119.95

Related Products: Cub Transmission | Farmall Cub Transmission Shaft | Farmall Cub Transmission

Front Hydraulic Pump Drive Shaft

Front Hydraulic Pump Drive Shaft


…[ Ferguson Tractor: TE20, TO20, TO30 (when using MFS112 crankshaft pulley) ]; Replaces: 195454 * 9-3/8" Length* Pulley end: 1" O.D. x 10 Splines* Pump end: 3/4" O.D. with 3/16" x 3/4" KeywayUse with ABC1812. Measure before ordering.
Product Number: ABC1814
Price: $45.65

Related Products: Loader Pump And Shafts | Massey Ferguson Hydraulic | Abc1814

Front Hydraulic Pump Drive Shaft

Front Hydraulic Pump Drive Shaft


…- Fits: [ all with 724, 725, 730 or 735 loaders: 2030, 2130, 4030 4 cylinder, 4130 4 cylinder (all 1953 - 1974) ] * 4" O.D. hub* 8-7/8" overall length* 1" O.D.* 10 spline shaft* (4) 7/16 - 14" threaded holes* 2-3/4" bolt circleNote: Fits Ford loader pump drive numbers 19-338, 19-339, 19-419.
Product Number: FDS3871
Price: $57.95

Related Products: Front Hydraulic Pump Drive Shaft | Ford 4000 Hydraulic Pump | Front Pump Shafts

Front Hydraulic Pump Drive Shaft

Front Hydraulic Pump Drive Shaft


…3500, 3550, 420, 4400, 515 * 7/8"-13 spline O.D. ends* 13-5/8" overall lengthNote: Check dimensions before ordering as three (3) different lengths were used.* If you need a 10.446" length please view FDS3755.* If you need a 11-5/8" length please view FDS3793. Splined coupler is available by special…
Product Number: FDS3748
Price: $29.95

Related Products: Front Hydraulic Pump Drive Shaft | Front Pump Shafts | Front Hydraulic Pump Drive

Vickers Hydraulic Vane Pump Shaft with Drive Key

Vickers Hydraulic Vane Pump Shaft with Drive Key


Ford - Fits: [ Golden Jubilee, Jubilee, NAA (all with square vane hydraulic pump 1953/54) ]; Replaces: drive key: 356961S, EAF966A * 4.035" overall length* 0.452" spline diameter* 0.159" key width
Product Number: FDS3659
Price: $94.50

Related Products: 1953 Ford Jubilee | 1953 Ford Jubilee Hydraulic Pump | Ford Naa Hydraulic Pump

Axle Shaft Cone

Axle Shaft Cone


Ford - Fits: Golden Jubilee, Jubilee, NAA, NAB, 2N, 8N, 9N; Replaces: 2N4221 Massey Ferguson - Fits: TEA20 (Outer Axle Bearing), TO20 (16 Spline), TO30 (19 Spline), Ferguson: TE20; Replaces: 195162M1 Miscellaneous - Replaces: 3795
Product Number: ABC199
Price: $64.99

Related Products: Ford 8n Rear Axle Bearing | 1953 Ford Jubilee Rear Axle | Ferguson To20

Distributor Drive Shaft

Distributor Drive Shaft


…450; Replaces: 353934R11 This will fit the listed models using IH Distributor 353898R11. ---This is NOT the shaft that the points contact or the weights attach to.-----This IS the shaft that will fall out of the distributor if distributor is removed from the tractor, it has a T shape on 1 end to…
Product Number: IHS815
Price: $28.95

Related Products: Distributor Gear | Farmall M Distributor | Farmall H Points

Rear Axle Shaft Bearing Collar

Rear Axle Shaft Bearing Collar


Ford - Fits: 2N, 9N; Replaces: 9N4132 Massey Ferguson - Fits: [ TE20, TEA20, TO20 (16 Spline) ], TO30 (19 Spline early axle w/ 1.985" O.D., Will NOT fit late TO30 w/ 35 style axle.); Replaces: 181257M1 1.995 I.D., 2.754 O.D., .705 WIDTH
Product Number: ABC264
Price: $15.99


Front Hydraulic Pump Drive Shaft

Front Hydraulic Pump Drive Shaft


…]; Replaces: 197118 Ford Industrial - Fits: [ following with 720 Ford loader using 19-251 pump drive kit: 2030, 2130, 4030 4 cylinder, 4130 4 cylinder (1962-1964) ] * 8.375" overall length* One end has 10 splines with  0.980" O.D.* One end has 0.750" O.D. with 3/16" x 3/4" keyway
Product Number: ABC3867
Price: $34.45

Related Products: Front Hydraulic Pump Drive Shaft | Abc3867 | Loader Pump And Shafts

Front Hydraulic Pump Drive Shaft

Front Hydraulic Pump Drive Shaft


…7/8" O.D.* 11-5/8" overall length* 13 splines each endNote: Check dimensions before ordering as three (3) different ones were used. * If you need a 10.38" length please view FDS3755. * If you need a 13-5/8" length please view FDS3748. Splined coupler is available by special order.…
Product Number: FDS3793
Price: $38.50

Related Products: Loader Pump And Shafts | Front Pump Shafts | Pump Drive Shaft For Loader

Front Hydraulic Pump Drive Shaft

Front Hydraulic Pump Drive Shaft


…Jubilee, Jubilee, NAA, NAB; Replaces: 194355 Ford Industrial - Fits: 1953 - 1964: 4130 4 cylinder * 9-3/16" overall length (one end is 3/4" O.D. 6 splines and one end is 3/4" O.D. with 3/16" x 3/4" keyway)Note: Fits Dearborn and Ford Loader pump drive #'s 19-21, 19-42, 19-60, 19-61, 19-70, 19-71,…
Product Number: ABC3860
Price: $23.50

Related Products: Front Pump Shafts | Loader Pump And Shafts | Pump Drive

Vickers Vane Style Hydraulic Pump Shaft with Drive Key

Vickers Vane Style Hydraulic Pump Shaft with Drive Key


Ford - Fits: [ 600, 620, 630, 640, 650, 660, 700, 740, 800, 820, 840, 850, 860, 900, 940, 950, 960 (all using the square vane hydraulic pump; 1954 to 1955; up to SN: 66849 ) ]; Replaces: Key: 356961-S, Shaft: NCA966A * 4.442" long,* 0.601" O.D. keyed end* 0.450" O.D. splined end
Product Number: FDS3394
Price: $94.50

Related Products: Hydraulic Pump Drive Shaft | Hydraulic Pump Shaft


Sort By:
1 - 16 of 50
Show:
per page

All content and images © Steiner Tractor Parts 1660 S. M-13 Lennon, MI 48449 Ph: 800-234-3280 - All Rights Reserved