1-800-234-3280

    1 - 19 of 19 Products >
  1. Starter Crank
  2. >
  3. all

Starter Crank

  • 1
Sort by:
View: Show: per page
Showing Products: 1 - 19 Total Products: 19

Steering Wheel Starter Crank

Fits John Deere - A (sn 584000 and up), B (sn 201000 and up), 50, 520 (up to sn 5208099), 60, 620 (up to sn 6213099), 70 (Gas); Replaces: AB3580R

Product Number: JDS1363
Price: $48.50

Starter Hand Crank with Spinner and Pin

Ford - Fits: [ 2N, 8N, 9N (1939-52 Serviceable for models without bumpers) ]; Replaces: 2N17040A, 9N17040 International / Farmall - Fits: Cub (up to sn 227700), Cub LoBoy: Cub Loboy (up to sn 12575); Replaces: 351010R31, PIN: 351011R1 Massey Ferguson - Fits: [ TE20, TO20, TO30 (Without Bumpers) ],…

Product Number: IHS543
Price: $48.50

Starter Hand Crank With Spinner

International / Farmall - Fits: Super A (with 123 ENGINE), [ Super C, 200, 230, 240, 340, 404, 504 (with tricycle front end only) ], 100, 130; Replaces: 357750R11 Includes spinner on handle. Measures 16-3/4" to the first bend. The bar stock is 3/4" in diameter. Will not fit C, SUP. C, 200, 230, 240,…

Product Number: IHS545
Price: $54.50

Starter Hand Crank W/ Spinner

International / Farmall - Fits: H, HV, M, MV, Super H, Super HV, Super M, Super MTA, 300, 400, Farmall Rowcrop: 350, 450 (ALL with TRICYCLE FRONT); Replaces: 51544DBX Fits Gas/Lp Only, Will not FIT DIESELS

Product Number: IHS546
Price: $68.50

Starter Hand Crank Assembly with spinner and pin - Fits JD M

JD Industrial - Fits: Engine: 145 JD Miscellaneous - Fits: Engine: 92 Fits John Deere - M, MC, MI, 40 (40C, 40H, 40S, 40U, 40V, 40W series); Replaces: AM223T, AM629T * 13-3/4" from center of drive pin to the first bend* Drive pin dimensions: 1.50" length x 0.313" length* If you have a…

Product Number: JDS1054
Price: $68.50

Starter Hand Crank with Pin and Spinner

International / Farmall - Fits: [ C, Super C, 200, 230, 240, 340, 404, 504 (Farmall ROWCROPS only with wide front axle) ]; Replaces: Pin: 15204D, 352496R93 There is 20" to the first bend on this crank. 3/4" diameter.

Product Number: IHS3195
Price: $57.50

Starter Hand Crank With Spinner

IH Industrial - Fits: A-I International / Farmall - Fits: A, AV, AV-1, B, BN, [ C, 200, 230, 340, 404, 504 (with TRICYCLE FRONT ONLY) ], Super A (with 113 ENGINE); Replaces: PIN: 15204D, 53385DBX 12-3/4" to first bend. 3/4" diameter. Does not Fit C, Super C, 200, 230, 240, 340, 404 & 504…

Product Number: IHS544
Price: $54.50

Starter Handcrank With Spinner And Pin

Allis Chalmers - Fits: B, C, CA; Replaces: 207893, 70207893

Product Number: ACS350
Price: $52.50

Starter Hand Crank with Pin

…without bumpers) ]; Replaces: 2N17040A, 9N17040 International / Farmall - Fits: Cub (up to sn 227700), Cub LoBoy: Cub Loboy (up to sn 12575); Replaces: 351010R31, Pin: 351011R1 * This hand crank does not include the spinner.* This crank measures 13-1/4" to the first bend.* 5/8" diameter

Product Number: IHS401
Price: $29.50

Steering Wheel Starter Crank

Fits John Deere - [ A, AH, AN, ANH, AW, AWH (all SN: 477000 to 583999) ], [ B, BN, BNH, BW, BWH, BWH40 (all SN: 60000 to 200999) ], [ G, GH, GM, GN, GW (all SN: 13000 and up) ]; Replaces: AA3032R The overall length of this crank is approximately 4-3/16" long. Note: Must use with B1608R flywheel hub.

Product Number: JDS3422
Price: $34.95
Related Products: John Deere Crank | Hand Crank

Starter Hand Crank With Original Style Spinner - Fits JD MT

Fits John Deere - MT, 40 (TriCycle), TriCycle: 420 (Tricycle), Tricycle: 430 (Tricycle); Replaces: AM1126T 8" center of drive pin to 1st bend.

Product Number: JDS1308
Price: $68.50

Pony Motor (Cranking Engine) Distributor "Wico"

Fits John Deere - [ 70, 720, 730 (Diesel with Pony Start) ], [ 80, 820 2 cylinder, 830 2 cylinder (with Pony start) ]; Replaces: AR1370R

Product Number: JDS103
Price: $298.50

Combination Switch without Lever (O.E.M.)

…840 (Pony start) ]; Replaces: resistor: AF2143R, switch: AR20433, switch with resistor: AR21162 This is a 6-Volt combination starter & light switch for Pony Start C.E. (Cranking Engine) tractors. Does not work on electric start, for these applications please view JDS1467 and JDS885.

Product Number: JDS3214
Price: $84.50

Restored Case Tractor - Antique Tractor Blog

…Case I bought this Case tractor in Oakland, Mississippi. It had not been cranked in about five years, just sitting outside in the weather. Exhaust was covered, engine not stuck, had anti-freeze in it, had no water in the crank case, and luckily the rubber was good. The diesel pump had two stuck…

Electrical Parts Archives - Antique Tractor Blog

…would then supply electricity for the tractor as long as it was running. Magneto technology has been around for a long time – the little crank you’d turn on an old-fashioned telephone was a magneto, too. A well-designed magneto can generate plenty of spark, and they are a reliable…

Tips for Starting a Tractor in Cold Weather - Antique Tractor Blog

…the effects of slow cranking that is characteristic of 6V systems and weak batteries. A 12V conversion can be very helpful. In old tractors that cannot tolerate multi-viscosity oil,( such as 10W-40), switching to a lighter weight for winter eases up the load on the starter and lets cold oil flow…

Magneto vs. Distributor - Antique Tractor Blog

…would then supply electricity for the tractor as long as it was running. Magneto technology has been around for a long time – the little crank you’d turn on an old-fashioned telephone was a magneto, too. A well-designed magneto can generate plenty of spark, and they are a reliable…

Is your tractor a Cub, Cub LoBoy or model 154, 184, 185, learn the difference. - Antique Tractor Blog

…in sometime the 185 run. It consisted of a gear drive starter, alternator and bracket, and a flywheel ring gear was needed on some models. Starter required minor rewiring. The change came about because of the problem of keeping front crank pulleys from becoming loose and cutting off keyways and…

Related Products: Farmall Cub Steering Box

Combination Switch Without Lever

…Replaces: AR20444 * For use on tractors with 4 head lights & 24 Volt Electric Start only - for 2 light applications please use JDS885* Does not work on Pony Start C.E. (Cranking engine) - for these applications please use JDS3214* 5 Positions* 8 spade / screw terminals* 30 amp rating

Product Number: JDS1467
Price: $68.45
Did you find this search useful? Yes No
  • 1
Sort by:
View: Show: per page