1-800-234-3280

Welcome to Steiner Tractor Parts

    1 - 24 of 32 Products >
  1. To 35 Clutch
  2. >
  3. all

To 35 Clutch

Sort by:
View: Show: per page
Showing Products: 1 - 24 Total Products: 32

Clutch Kit

…fingers, both with 10 spline PTO Disc), [ 35, 35 (With forged fingers not stamped steel fingers) ], 50 (With forged fingers not stamped steel fingers, sn 515433 and up); Replaces: 193930M92, 512355M91, 516068M93, 526666M93 * New dual clutch kit includes clutch disc, pressure plate assembly, pilot…

Product Number: MFS2091
Price: $306.95

Clutch Kit

…- Fits: [ Some Early,: 35, TO35 (W/ 9" Single Clutch & 1 3/8" Splined Hub) ], [ Some: TE20, TEA20, TO20, TO30 (W/ 9" Single Clutch & 1 3/8" Splined Hub) ]; Replaces: 180250M91, 180263M91, 183209M91, 185923M91, 193621M91, 513576M91, TO7550, TO7563 Measure clutch spline diameter before…

Product Number: MFS1994
Price: $171.50
Related Products: Clutch | M W Clutch | Ferguson To20

Clutch Kit (Rockford Clutch)

…new clutch disc, 1 new pressure plate, 1 new throwout bearing (graphite like original), 1 clutch pilot bushing and an alignment tool. The woven clutch disc is 6.5" OD with 10 splines and a 15/16" hub. Please note: This clutch comes pre-adjusted There are other adjustments that need to be made to the…

Product Number: IHS645
Price: $175.80

Clutch Disc

…10 spline clutch) ], [ 600, 620, 630, 640, 700, 740, 800, 820, 840, 900 (with 3 or 4 speed transmission & 9" 10 spline clutch, up to SN: 14257) ]; Replaces: 84365150, 91A7550, NAA7550A Fits John Deere - L (To SN: 625015); Replaces: AL2049T Massey Ferguson - Fits: [ Some Early,: 35, TO35 (Measure…

Product Number: FDS087
Price: $29.95

Clutch Disc

…using 9" diameter clutch; Note: measure before ordering as 2 different diameters were used: HD3 , I600 Allis Chalmers - Fits: some early models using 9" diameter clutch; Note: measure before ordering as 2 different diameters were used: B, C, CA, D10 (up to SN: 3501), D12 (up to SN: 3001), D14, D15,…

Product Number: ABC3502
Price: $36.95

Clutch Disc

…235, 245, 255, 265, 65 (With 11" diameter disc & 10 splines) ], [ MF Industrial: 20, 20C, 30, 30B, 30D, 31, 35, 40, 40B (With 11" diameter disc & 10 splines) ], MF Tractor: 35 (With 11" diameter disc & 10 splines), 50 (SN: 515433 & up - With 11" diameter disc & 10 splines);…

Product Number: MFS2311
Price: $39.95
Related Products: Clutch | Massey Ferguson 165 | To35 Clutch

Clutch Release Yoke, Pair

…up), Cub LoBoy: Cub Loboy; Replaces: Left: 353239R2, Right: 353240R2 * Do not start engine without checking clutch pressure plate finger clearance. Failure to do so could damage the pressure plate and throw out bearing.  Adjust clutch linkage per instructions.* Will not fit 154, 184 or 185.

Product Number: IHS498
Price: $30.95

Clutch Throw Out Bearing

…283, 285S, 290, 340, 342, 350, 352, 355, 360, 362, 365, 375, 383, 390, 565, 575, 590, 65, 675 (with dual clutch) ], [ MF Tractor: 25, 35, 50 (with dual clutch) ], MH Tractor: 50 (with dual clutch); Replaces: 195508M1, 833084M1 Sealed bearing, no need to grease. 2.490" I.D., 4.060" O.D., 0.870" wide.

Product Number: ABC2501
Price: $21.95

Clutch Pilot Bearing

…55, 6600, 6620, 7700, 7720, 925, 932, 935, 942, 945, 95, 950, 952, 960, 970 (used as a clutch pilot bearing) ], 45 (used as a clutch pilot bearing; SN: 21501 and up), 955 (up to SN: 26952; used as a clutch pilot bearing) Fits John Deere - [ 50, 520, 530, 60, 620, 630, 70, 720, 730, 730D, 80, 820…

Product Number: ABC3000
Price: $8.25

Operators Manual Reprint: Cockshutt 35, Blackhawk 35

Cockshutt - Fits: [ 35, 35 Blackhawk (gas) ] This operators manual reprint has 27 pages, is 8-1/2" x 11" but does not include the wiring diagram. Operator manuals explain how to operate the tractor. This book is sometimes referred to as an owner's manual and it is a reprint of the original book that…

Product Number: REP2989
Price: $16.99

Clutch Release Yoke Pivot Pin

…Cub LoBoy: Cub Loboy; Replaces: 350948R1 DO NOT START ENGINE WITHOUT CHECKING CLUTCH PRESSURE PLATE FINGER CLEARANCE, FAILURE TO DO SO COULD DAMAGE THE PRESSURE PLATE & THROW OUT BEARING, ADJUST CLUTCH LINKAGE PER INSTRUCTIONS. -------------(WILL NOT FIT 154, 184, 185)------------------------

Product Number: IHS1497
Price: $13.50

PTO Over Running Clutch 1-1/8" - 1-3/8"

…1/8" Female To 1 3/8" Male* 6 Spline* Must have existing hole in pto shaft for roll pin.* For tractors up to  75 horsepower*  6 3/4" overall length*  Includes  2" x 5/16 O.D. roll pin and grease zerk*  May have to shorten equipment drive shaft to

Product Number: MIS118
Price: $62.35
Related Products: 8n Pto | Roll Pin | Ferguson To20 Clutch

PTO Over Running Clutch 1-3/8" - 1-3/8"

…Female to 1-3/8" Male* 6 Splines* For use on tractors with up to 75 Horsepower*  6-3/4" overall length* Must have existing hole in pto shaft for roll pin.* Includes 2" x 5/16 O.D. Roll Pin & Grease Zerk* May have to shorten equipment drive shaft to

Product Number: MIS138
Price: $62.35
Related Products: Ford 8n Pto Shaft | Farmall C | Farmall M

Clutch Throw Out Bearing (IH Torque Amplifier Release Bearing)

…Steering Clutch), [ 2510, 2520, 3020, 4040, 4230, 4240, 4430, 500, 500A, 500C, 510 (Powershift) ], 320, 330, 4000, 4000, 4010, 4020, [ 420, 430, 435 (W/ Single Clutch) ], 4320, Hi Cycle: 700, Motor Grader: 770; Replaces: AL2116, AL2116T, AM3983T, AR41942 MF Combines - Fits: Combine: 205, 300, 35,

Product Number: ABC496
Price: $19.95
Related Products: Throw Out Bearing | Throw Out | Clutch

Throwout Bearing -- Fits Farmall Cub, & Cub Loboy

…start engine without checking clutch pressure plate finger clearance, Failure to do so could damage the pressure plate and throw out bearing.* Throw out bearing must be perpendicular NOT tilted.*  Grease throw out bearing and adjust clutch linkage per instructions.* No refund on…

Product Number: IHS015
Price: $49.95

Pressure Plate, New Not Rebuilt

…diameter * Do not start engine without checking clutch pressure plate finger clearance; failure to do so could damage the pressure plate and throw out bearing. Adjust clutch linkage per instructions. Warranty is void if parts are damaged due to improper adjustments, i.e. pressure…

Product Number: ABC550
Price: $85.95

Oil Seal

…with dual clutch)), [ MF Industrial: 20C, 31 (Main Drive Pinion Shaft Seal (all standard transmission with dual clutch)) ], MF Overseas (UK built): 35 (Main Drive Pinion Shaft Seal (all standard transmission with dual clutch)), [ MF Tractor: 135, 150, 165, 175, 20, 230, 235, 245, 30, 35, 65 (Main…

Product Number: ABC1501
Price: $9.95

Full Engine Gasket Set (includes front crankshaft seal)

Case - Fits: S, SC, SC-3, SC-4, SI, SO; Replaces: 3598AA, A189555 * Rear seal not used in this application as the clutch runs in oil.* 0.090" Thick head gasket. Metal jacketed.* Fits up to 3-3/4" bore

Product Number: CKS2390
Price: $154.50
Related Products: Case Sc | Case Sc Gasket

Bearing, Front, Transmission Spline Shaft

…450, 450B, 450C, 550, 555 (as a steering clutch hub bearing) ], [ 450, 450B, 450C, 550, 555, 555A (as an upper final drive shaft inner bearing) ], [ 450D, 455D (with 23 spline upper final drive shaft inner bearing) ], [ 450E, 455E, 550B, 555B (up to engine SN: 719253, as an upper final drive…

Product Number: IHS4264
Price: $12.99

Brake Ball for Disc Brakes (5/8")

…- Fits: [ F40, TE20, TO20, TO30, TO35, 230, 235, 245, 35, 50 (As a Continental Gas Governor Ball, 10 Used Per Engine) ], [ 135, 150 (Continental & Perkins Gas, As a Governor Ball, 10 Used Per Engine) ], [ 95, 97 (For The Live Pto Clutch Assy., 4 Used Per Tractor) ], [ 95, 97 (For Rear Pto…

Product Number: CKS2647
Price: $1.99

Brake Riveting Tool

…- Fits various models Oliver - Fits various models * 3-3/8" Deep Throat* 2-1/8" high throat.* On some models this reachs all but the center rivet, which may have to be hand riveted.* 5/16" anvil* Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake on John Deere tractors.

Product Number: MIS2547
Price: $89.95

Drain Plug Gasket / Washer

…on the clutch housing power shift only)) ], 1270 (engine oil pan drain plug gasket on gas / diesel and also used as a clutch housing, rear end housing, final drive, etc., drain plug gasket), 1370 (engine oil pan drain plug gasket on gas / diesel up to SN 872760 and also used as a clutch housing,…

Product Number: ABC1955
Price: $1.75
Related Products: Ford Oil Pan Gasket | Ford 3000 | Ford 850

Oil Seal

…DCS (As a hand clutch throw out fork shaft seal, (2 used)) ], [ D, DO, DV (As a steering worm wheel shaft seal (1) used) ], LA (To Sn: 5108013, As a hand clutch throw out fork shaft, (2 used)), [ S, SC, SC-3, SC-4, SI, SO (As a clutch throw out fork shaft seal (1) used for hand clutch & (2) used…

Product Number: ABC1630
Price: $7.95

PTO Knob, Gear Shift Knob or Brake Lever Knob (see specific application)

Allis Chalmers - Fits: B (Brake lever knob up to SN: 1101), CA (Final Drive Clutch Knob), [ RC, WC (PTO knob & Trans lockout lever knob) ], [ WD, WD45 (PTO knob) ]; Replaces: 206456, 70206456 Avery - Fits: Avery: A, R; Replaces: 112511 Cockshutt - Fits various models Ford - Fits: [ 2000 3…

Product Number: ABC221
Price: $4.95
Related Products: Ford 3910 | Gear Shift Boot | Shifter Boot
Did you find this search useful? Yes No
Sort by:
View: Show: per page