gauges

Sort By:
View:
Show:
per page
Water Temperature Gauge, Black Face, 48" Lead

Water Temperature Gauge, Black Face, 48" Lead


gauge has a black face with a 48" right angle lead.* Has 5/8-18 UNF end w/ 1/2" NPT pipe bushing.* Side note for M series John Deeres, due to the sensor location on the water manifold the following serial numbers for this temperature gauge may read hotter than normal on the gauge; …
Product Number: NJD1718
Price: $29.50

Related Products: John Deere 60 Gauges | John Deere M Temp Gauge | Am2444t

Oil Pressure Gauge (0 to 30 Psi)

Oil Pressure Gauge (0 to 30 Psi)


…Replaces: VT2249 Case Industrial - Fits: VI, 430CK (Gas up to sn 8262799)  * This gauge is shipped with 1/8" male pipe threads.* Unless you can reuse your old adapter fitting for the oil line to the gauge, you will need one of the following depending on the line size:* ABC538 (1/8" line) or…
Product Number: CKS1642
Price: $29.95

Related Products: Case Oil Pressure Gauge | Oil Pressure Gauge

Water Temperature Gauge

Water Temperature Gauge


Allis Chalmers - Fits: D10, D12, D14, [ D15, D17, D19 (Gas/Diesel) ], WD45 (Diesel); Replaces: 226966, 228334, 229571, 229870, 229871, 231378, 235724, 238905, 70235724 * Dash mounted* Fits 2" diameter hole.* Includes "Allis Chalmers" logo.* 75" Lead.…
Product Number: ACS260
Price: $48.50

Related Products: Water Temperature Gauge | Temperature Guage

Fuel Gauge

Fuel Gauge


…1.465" housing depth* Resistance 30 - 250 ohms* 2.03" Housing Diameter, Mounts into rear of dash Gauge must be grounded to work properly; gauge now has an extra grounding terminal, to run a ground wire to the sending unit. On some applications, the existing mounting clamp…
Product Number: JDS776
Price: $39.95

Related Products: John Deere Fuel Gauge | John Deere 4020 Fuel Gauge | 12 Volt Fuel Gauge

Restoration Quality Water Temp Gauge

Restoration Quality Water Temp Gauge


Minneapolis Moline - Fits: [ Big Mo 400, JetStar, 335, 445, 500, 600 (WITHOUT GAUGE CLUSTER) ], G ((4 cylinder only)), [ GB, GBLP, GTA, GTB, GTC (Some) ], R, RT, RTE, RTI, RTN, RTS, RTU, U, UB, UBE, UBN, UB Special, UBU, UTC, UTE, UTI, UTN, UTS, UTU, Z, ZA, ZAE, ZAN, ZAS, ZAU, ZB, ZBE, ZBN, ZBU, ZT;…
Product Number: MMS031R
Price: $39.95

Related Products: Mms031r | Minneapolis Moline | Minneapolis Moline 335

Rim: 4" x 16"

Rim: 4" x 16"


…JD1268, JD1268R * Powder coated J.D. yellow.* Restoration quality, Original look.* Heavier than original (25lbs).* Approximately 8 gauge steel.* 4" width. Measure bead to bead not outside to outside (measures 5-1/8" from outside to outside).* 16" diameter. Measure bead to bead not…
Product Number: JDS657
Price: $174.95

Related Products: Rims | Tires

Ammeter Gauge (30-0-30)

Ammeter Gauge (30-0-30)


AC Industrial - Fits: HD3 , I40, I400, I60, I600 Allis Chalmers - Fits: B, C, CA, D10, D12, D14, D15, D17, D19, D21, H3, WC, WD, WD45, WF, 170, 175, 180, 185, 190, 190XT; Replaces: 240987, 254407, 70240987, 70254407 Avery - Fits: A, BF, BG, R, V Case - Fits: C, CC, CC-3, CC-4, CCS, CH, CI, CO, D,…
Product Number: ABC109
Price: $13.00

Related Products: Ammeter | Amp Gauge | Ford 8n Amp Gauge

Water Temperature Gauge

Water Temperature Gauge


…/ Farmall - Fits: C, Super C, 200, 230, 240, 300, 330, 340 (GAS), [ 350, 400, 450, 460, 560, 660 (gas & diesel) ]; Replaces: 353868R91, 369849R91, 393476R91, 393481R91, 53690R2 * The IHS531 water temp gauge includes a 72" lead.* 5/8"-18 UNF end with 1/2" NPT pipe bushing
Product Number: IHS531
Price: $49.95

Related Products: Farmall 560 Temp Gauge | Farmall Temperature Gauge | Ih Temp Gauge

Temperature Gauge

Temperature Gauge


…not illuminated, no logo* 2" diameter with a 60" lead* 5/8"-18 U.F. end w/ 1/2" NPT pipe bushing* Probe diameter Is 0.374", length is 1-3/16"* The temp gauge features a chrome bezel with white, green and red zones on a black faceCheck length before ordering; may vary from original appearance.
Product Number: ABC1593
Price: $29.95

Related Products: International T9 | Massey Ferguson 3165 | Massey Ferguson 135

Water Temperature Gauge

Water Temperature Gauge


AC Industrial - Fits: [ HD3 , HD4 , I40, I400 (And Others Using 72" Or Shorter Capillary Lead) ], [ I60, I600 (Gas, Diesel, And Others Using 72" Or Shorter Capillary Lead) ] Allis Chalmers - Fits: [ D10, D12, D14, H3, H4 (And Others Using 72" Or Shorter Capillary Lead) ], [ D15, D17, D19 (Gas,…
Product Number: ABC239
Price: $26.95

Related Products: Allis Chalmers I400 | John Deere 40 | Water Temperature Gauge

Ammeter (30-0-30)

Ammeter (30-0-30)


IH Industrial - Fits: I4, I6, ID6, T4 IH Lawn & Garden - Fits: Cub Cadet: 1210, [ 1282, 582, 682, 782, 982 ((SN:720000 & up) ) ], 1512, 1606, 1710, 1711, 1712, 1912, 1914, 680, 882 International / Farmall - Fits: Cub (1950 & Up), Cub Loboy (1955 & Up), H, HV, I9, ID9, M, MD, MDV,…
Product Number: IHS395
Price: $26.95

Related Products: Farmall Ammeter | International 300 Utility | Ih Amp Gauge

Universal Oil Pressure Gauge (0 - 50 PSI)

Universal Oil Pressure Gauge (0 - 50 PSI)


…42**This gauge is shipped with 1/8" male pipe threads. Unless you can reuse your old adapter fitting for the oil line to the gauge, you will need one of the following depending on the line size: ABC538 (1/8" line); ABC2353, IHS626 (1/4" line); or ABC2360 3/16" line ---This is a dash mounted gauge
Product Number: ABC082
Price: $19.95

Related Products: Oil Pressure Gauge | Farmall M Oil Gauge | Ford 8n Oil Pressure Gauge

Allis Chalmers Water Temperature Gauge with white face

Allis Chalmers Water Temperature Gauge with white face


…WD45, WF; Replaces: 213675, 70213675 * This water temperature gauge has a white face and includes the Allis Chalmers logo, like original.* This gauge threads into the radiator neck, or thermostat housing.* 1.800" brass stem length* Temp gauge measures 2.500" from the top of the nut to the end of the…
Product Number: ACS064
Price: $27.95

Related Products: Water Temperature Gauge | Temp Gauge | Allis Chalmers Wd45

Engine mounted Oil Pressure Gauge (0-25 PSI) -  White Face

Engine mounted Oil Pressure Gauge (0-25 PSI) - White Face


…], BO, BR, D (up to SN: 143799), [ G, GH, GN, GW (up to SN: 12999) ], [ M, MC, MI, MT (to mid 1952) ]; Replaces: AA1730R, AB292R, AM737T This gauge has a plain face without the John Deere logo as shown above. Can also be used on later models but the face plate color is not correct for tractors…
Product Number: NJD420
Price: $24.50

Related Products: John Deere Mt | John Deere 420 | Oil Gauge

Oil Pressure Gauge (0-75 PSI) - Dash mounted

Oil Pressure Gauge (0-75 PSI) - Dash mounted


…OS4, OS6, W4, W6, W6TA, W9, WD6, WD9, WDR9, WR9, WR9S; Replaces: 41934D, 41934DB This gauge is shipped with 1/8" male pipe threads. Unless you can reuse your old adapter fitting for the oil line to the gauge, you will need one of the following depending on the line size: ABC538 (1/8" line) or…
Product Number: IHS452
Price: $39.95

Related Products: Farmall H Oil Pressure Gauge | Farmall Oil Pressure Gauge | Oil Gauge

Water Temperature Gauge with white face and 6' lead

Water Temperature Gauge with white face and 6' lead


…AM610T * This water temperature gauge has a metal base, glass lens and a black bezel.* This gauge has a 72 inch capillary lead. Please measure the length required for your tractor before ordering.* Has 5/8-18 UNF end w/ 1/2" NPT pipe bushing.* This gauge has a plain face without the John…
Product Number: NJD422
Price: $29.50

Related Products: John Deere Temperature Gauge | John Deere 40 Water Temp Gauge | John Deere M


Sort By:
1 - 16 of 398
Show:
per page

All content and images © Steiner Tractor Parts 1660 S. M-13 Lennon, MI 48449 Ph: 800-234-3280 - All Rights Reserved