…12 Volt Coil. ) White - Fits: 2-44 (And Others Using A 12 Volt Distributor System), [ 2-70, 2-78, 4-78 (White Used A Factory 6 Volt Coil With A Resistance Wire, If The Wiring Has Been Changed To Delete The Resistance Wire Use This 12 Volt Coil. ) ] * Barrel style* Internally resisted* Includes coil…
Product Number: ABC509
…Distributor Ignition coil with resister wire built in the 12 volt harness. ) ], 1650 (SN: 147569 & UP Using A 6 Volt Distributor Ignition coil with resister wire built in the 12 volt harness. ), [ 770, 880 (SN: 156837 & UP Using A 6 Volt Distributor Ignition coil with resister wire built…
Product Number: ABC011
Ford - Fits: 2N, 8N (up to sn 263843 with front mount distributor), 9N; Replaces: 9N12024 * For tractors with generator/alternator mounted on the RIGHT side as sitting in the seat.* For N-Series tractors with front mount distributor* For engines with distributor mounted BEHIND the…
Product Number: ABC119
…WD6, WD9, WR9, WR9S, 100, 130, 140, 200, 230, 240, 300, 330, 340, 400, 450 (To Sn: 11083), 600, 650, Cub LoBoy: Cub Loboy; Replaces: 353874R91 This is an International Harvester OEM style 6 volt distributor coil. This distributor coil has a 1.4 ohm rating between the two primary winding terminals.
Product Number: IHS234
Ford - Fits: 2N, 8N (up to sn 263843), 9N; Replaces: 9N12024 * For N-Series tractors with front mount distributor.* For engines with distributor mounted BEHIND the fan blade, (clips to top of distributor)* For tractors with generator mounted on the RIGHT side as sitting…
Product Number: FDS072
…neoprene. Dimensions= (approximately) 2 wires= 32", 1 wire= 34 1/2", 1 wire = 38", & coil wire = 24" The coil wire is made from excess wire left over from the spark plug wire. Also fits fhe following 4 Cylinder tractors: Brockway, Centaur,…
Product Number: ACS228
…boots.* Wire lengths are approximately; 24 3/4", 24 3/4", 29 3/4", 34 1/2" & 23 1/2" long coil wire.* You must cut the wires to length and crimp the ends with a crimping tool.* The coil wire is made from excess wire left over from the spark plug wire.* Also fits fhe following 4 Cylinder…
Product Number: FDS149
…- Fits various models * 2 terminal style* Reduces voltage to distributor points* 2.0 OHMS of resistance* Note, it does not make any difference to which side of the resister goes to the coil or ignition switch. Used to step down 12-volt battery. Limits voltage to coil when using 12-volt battery.
Product Number: ABC366
…Wire Use This 12 Volt Coil. ) White - Fits: 2-44 (And Others Using 12 Volt System), [ 2-70, 2-78, 4-78 (White Used A Factory 6 Volt Coil With A Resistance Wire, If The Wiring Has Been Changed To Delete The Resistance Wire Use This 12 Volt Coil. ) ] 12 Volt Hot Coil. Maximum voltage for faster…
Product Number: ABC348
…distributor* Wire with ring terminal connects to the condenser* Wire with spade terminal connects to the terminal on side of distributor housing.* Please do not leave you ignition switch on when the tractor is not running as it will burn out the coils and void the warranty
Product Number: JDS085
Fits John Deere - [ A, AN, ANH, AW, AWH (When equipped with X series magneto up to SN 659289) ], [ AO, AR (When equipped with X series magneto up to SN 275396) ], [ B, BN, BNH, BW, BW40, BWH (When equipped with X series magneto up to SN 268819) ], [ BO, BR (When equipped with X series magneto SN…
Product Number: FXH2603
…F4, F6, H4 Magnetos) ]; Replaces: 21401D, 21401DAX, 361114R91, 47439D, 47439DA, 47439DAX, 57926DX, RW104 * Fits magnetos with round retaining bar.* The retaining bar is not included, Reuse the old one.* 2.218" O.D.* This coil fits the listed models with the following IHC magnetos: F4, F6, H1 and H4.
Product Number: F4COIL
…5190, 5200, 5340, 6600 (1965 and up) ], [ Industrial: 5500, 5550 (1965 and up) ]; Replaces: D7NN12287A, DHPN12259A Silicone core. Waterproof neoprene. Pre-assembled, no cutting or fitting required. ***Must use w/ aftermarket coil #ABC509 etc. as coil wire boot WILL NOT fit original ford coil ***
Product Number: FDS2543
…- Fits: 2-70, 2-78, 4-78 This wiring set is cut to length, has waterproof neoprene, has 7 mm "tinned" copper core, and includes the coil wire. NOTE: you have to crimp the ends with a crimping tool. Wire lengths are as follows: 2 wires = 12-1/2", 2 wires = 18-1/2", 2 wires = 22", (1) coil wire = 23".
Product Number: ABC2863
…wires are approx. 32 & 49" long, have a copper core with aluminum coating to prevent corrosion and a Neoprene Outer Cover.* Each spark plug wire has one end pre-assembled and you crimp the other end with a crimping tool.* The coil wire is the excess wire left over from the spark plug wire.
Product Number: JDS643