Engine Sleeves And Pistons
Showing Products:
1 - 24
Total Products:
41
…seals for your major engine overhaul* Governor seal not included * This 4-cylinder kit has a 4" overbore.* Includes sleeves, aluminum stepped head pistons, piston ring sets, piston pins and pin retainers.* Most other sets available by special order.* 1.312" wrist pin O.D.* Sleeve O.D. (cold) 4.124"*…
Product Number: IHS6197
Price: $559.99
…with sleeved engine, 1954 - 1964) ] * 4" overbore* NOTE: Verify engine is sleeved before ordering* Sold Individually* Please be careful installing the sleeves. If the bore is not cleaned or honed properly, then the sleeves will break if you apply too much force.* We are not responsible for sleeves…
Product Number: FDS6444
Price: $34.99
…C-113 engine SN: 310300 and up or C-123 engine SN: 35830 and up; with block casting numbers 354898R1, 354898R2, 356318R2, 356318R3, 364111R2 or 366825R1 and others using 3.43" OD lower sleeve seal) ] IH Industrial - Fits: [ T4, U2A (some; with C-113 engine SN: 310300 and up or C-123 engine SN: 35830…
Product Number: IHS6447
Price: $79.99
Massey Ferguson - Fits: [ TE20, TO20 (with Z120 Continental gas engine) ]; Replaces: 825138M1 * Sold Individually* 3-5/16" overbore sleeve and orings
Product Number: MFS6465
Price: $49.99
…- Fits: with Z-134 Continental gas engine: 202, 204, 2135, 2200 Massey Ferguson - Fits: with Z-134 Continental gas engine: 135 (Special), 35, 50, F40, TO35; Replaces: 893008M1 Massey Harris - Fits: with Z-134 Continental gas engine: 50 * 3.375" overbore sleeve and orings* Sold Individually
Product Number: MFS6468
Price: $49.99
…66 (with 125 C.I. engines) ] AC Industrial - Fits: Loader: TL6 (with 125 C.I. engines), [ Power Unit: B125 , B15 (with 125 C.I. engines) ] Allis Chalmers - Fits: [ B, C, CA, IB, RC (with 125 C.I. engines) ]; Replaces: 208743, 70208743, 70208743V * 3-7/16"" overbore sleeve and o-rings* Sold…
Product Number: ACS6438
Price: $59.99
…with 226 C.I. gas power unit), [ Motor Grader: DG, M65 (4-cylinder gas; with 226 C.I. gas power unit) ] Allis Chalmers - Fits: [ D17, WD45, 170, 175 (4-cylinder gas; with 226 C.I. gas power unit) ]; Replaces: 257450, 70257450, 70257450V * 4.125" (4-1/8") overbore sleeve and orings* Sold Individually
Product Number: ACS6441
Price: $59.99
…lock: 786140, gasket set: 8N6008, piston: 8N6108B, rings: 8N6149B, sleeve: C0NN6055B, 86531518 * Basic engine kit includes:* (4) 0.040" thick sleeves* Please measure sleeve thickness before ordering* See FDS2976 for 0.090" sleeves* Standard 3.187" 3-ring pistons* Piston rings* Wrist pins* Wrist pin…
Product Number: FDS2970
Price: $279.99
…786140, gasket set: 8N6008, pistons: 8N6108B, rings: 8N6149B, sleeve: 8N6055B, 81859181 * Basic engine kit includes:* (4) 0.090" thick sleeves,* Please measure sleeve thickness before ordering* See FDS2970 for 0.040" sleeves* Standard 3.187" 3-ring pistons * Piston rings* Wrist pins * Wrist pin…
Product Number: FDS2976
Price: $289.99
…70283616 * verify tractor model and engine before ordering* Need replacement rings for this kit? See our ABC2090. * This 4-cylinder kit has a 4-1/8" (4.125") overbore and aluminum flat top pistons.* Includes sleeves, pistons, piston ring sets, piston pins, pin retainers, and sleeve sealing rings.
Product Number: ACS3052
Price: $499.99
…70257459, 70284361, PK121 * Need replacement rings for this kit? order ABC2090 This 4-cylinder piston kit has a 4.125" (4-1/8") overbore and aluminum concave head pistons. Includes sleeves, pistons, piston ring set, piston pins, pin retainers, and sleeve sealing ring. 7.25:1 Compression ratio.
Product Number: ACS3056
Price: $439.99
…cubic inch engine) ]; Replaces: 282941, 70282941 * Watch our engine overhaul video: http://www.steinertractor.tv/ * 4-cylinder sleeve and piston kit for 3.4375" (3-7/16") overbore* Flat top aluminum pistons* Includes sleeves, pistons, piston ring sets, piston pins, pin retainers, and sleeve sealing…
Product Number: ACS3050
Price: $399.99
…Continental gas engine: TO30; Replaces: 1751549M91, Complete Engine Gasket Set: 830631M91, 830641M91, 830697M91, PK105, Z129T-102 * Fits Z-129 Continental gas engine * 3.375" overbore* Each kit includes:* (4) sleeves, pistons, pins, piston ring sets, pin retainers, pin bushings* (8) sleeve sealing…
Product Number: MFS6200
Price: $479.99
…Please view instructions under our instruction tab. Also, watch our engine overhaul video: http://www.steinertractor.tv/ * This 4-cylinder kit has a 3.500" overbore.* Includes sleeves, aluminum pistons, piston ring sets, piston pins, and pin retainers.* (Verify engine is sleeved before ordering.)
Product Number: FDS3087
Price: $349.99
…Engine Gasket set: CPN6008H, Sleeve and Piston Kit: CPN6055A, Piston Pin Bushing: EAA6207A Ford Industrial - Fits: all with 134 C.I. gas, LP series 1953 - 1964: 2030, 2130 * Need replacement rings for this kit? order FDS2098 Please view instructions under our instruction tab. Also, watch our engine…
Product Number: FDS3457
Price: $449.99
…- Fits: Engine: BD-154 International / Farmall - Fits: B-414, 238, 374, 384, 424, 434, 444 * Only fits naturally aspirated diesel BD-154 engine* 3.5" Bore Includes:* 1 - Front crankshaft seal* 1 - Rear crankshaft seal* 4 - Wrist pin bushings (3043611R1)* 4 - Piston and pin* 4 - Piston ring set*…
Product Number: IHS4653
Price: $399.99
…Also, watch our engine overhaul video: http://www.steinertractor.tv/. * This 4-cylinder kit has a 4" overbore* Includes sleeves, aluminum pistons, piston ring sets, piston pins and pin retainers* NOTE: Verify engine is sleeved before ordering* Please be careful installing the sleeves. If the bore is…
Product Number: FDS3090
Price: $339.99
…instruction tab.* Also, watch our engine overhaul video: http://www.steinertractor.tv/. * This 4-cylinder kit has a 3.4375" overbore and stepped head pistons.* Includes sleeves, aluminum pistons, piston ring sets, piston pins, and pin retainers.* To order the sleeves separately, please see our…
Product Number: IHS3093
Price: $369.99
…our engine overhaul video: http://www.steinertractor.tv/. * This 4-cylinder kit has a 4" overbore.* Includes sleeves, aluminum stepped head pistons, piston ring sets, piston pins and pin retainers.* 1.312" wrist pin O.D.* Sleeve O.D. (cold) 4.124"Please be careful installing the sleeves. If the…
Product Number: IHS3096
Price: $399.99
…3.43" OD lower sleeve seal only* This 4-cylinder piston kit has a 3.250" overbore, stepped head aluminum piston and a 3.43" OD lower sleeve seal* Includes sleeves, pistons, piston ring sets, piston pins, pin retainers and sleeve sealing rings. If you need 3.30" OD lower sleeve seal, then please…
Product Number: IHS3064
Price: $299.99
…3.30" lower sleeve seal O.D. * This 4-cylinder kit has a 3.125" overbore, flat top aluminum 3 ring pistons and 3.30" lower sleeve seal O.D.* If you need 3.43" lower sleeve seal O.D, then please see IHS3064.* Includes sleeves, pistons, piston ring sets, piston pins, pin retainers and sleeve sealing…
Product Number: IHS3060
Price: $284.99
…TO20 (with Z120 Continental gas engine) ]; Replaces: 1751383M91, 830640M91, PK106, Z120T-101 * This 4-cylinder kit has a 3-5/16" overbore and flat head aluminum pistons.* Includes sleeves, aluminum pistons, piston ring sets, piston pins, pin retainers, and sleeve sealing rings.* Please view…
Product Number: MFS3099
Price: $419.99
…This 4-cylinder piston kit has a 3.250" overbore, flat top aluminum piston, and a 3.43" lower sleeve seal O.D.* If you need 3.30" lower sleeve seal O.D., then please see IHS3060* Includes sleeves, pistons, piston ring sets, piston pins, pin retainers, sleeve sealing rings and engine gasket set.…
Product Number: IHS3374
Price: $529.99
…sleeve seal O.D.) ], Windrower: 161 ('some'; with C-113 engine up to SN: 310300 or C-123 engine up to SN: 35830; with block casting #'s 6342D, 6342DB, 6342DE, 6342DG, 6342DH, 251069R1, 366204R1, 366204R2, 367825R1 and others using 3.30" lower sleeve seal O.D.); Replaces: Our kit includes* Piston*…
Product Number: IHS5833
Price: $49.99
