1-800-234-3280

Welcome to Steiner Tractor Parts

    1 - 23 of 23 Products >
  1. Cub 154 Drive Shaft
  2. >
  3. all

Cub 154 Drive Shaft

  • 1
Sort by:
View: Show: per page
Showing Products: 1 - 23 Total Products: 23

Is your tractor a Cub, Cub LoBoy or model 154, 184, 185, learn the difference. - Antique Tractor Blog

…were virtually the same except for clutches, on 154 and 185 were mounted on front shaft of transmission input shaft but 184 had them mounted on engine flywheel. This gave a much better life to clutches. Also 154’s used the old style Cub carburetor, they were rejetted, and would flow more…

Clutch Drive Shaft

International / Farmall - Fits: 154 (without creeper gear, sn 18709 and up), 185 (All without creeper); Replaces: 543603R1 * Oiled steel* 1.060" diameter x 29" long overall

Product Number: IHS1653
Price: $194.99

Transmission Drive Shaft Coupler Hub

International / Farmall - Fits: 154 (SN # 15072 and up; will fit earlier SN #154 by purchasing new bolt #531618R1, nut #9413994 and washer #120214, not supplied by STP), 185; Replaces: 404669R91, 404683R1, 531709R1 0.997 center I.D., (4) 0.325 bolt holes encased in rubber, (1) 0.315 clinch bolt…

Product Number: IHS1970
Price: $88.75
Related Products: Transmission Shaft

Clutch Drive Shaft

International / Farmall - Fits: 154 (up to SN: 18708 w/ creeper drive); Replaces: 530422R2

Product Number: IHS2339
Price: $195.00
Related Products: Loboy 154 Clutch

Clutch Drive Shaft

International / Farmall - Fits: 154 (SN: 18709 & up w/ creeper drive), 185 (All w/ creeper drive); Replaces: 543679R1

Product Number: IHS2342
Price: $195.00
Related Products: Loboy 154 Clutch | Drive Shaft

Clutch Drive Shaft

International / Farmall - Fits: 154 (without Creeper drive up to SN: 18708); Replaces: 404670R4

Product Number: IHS2351
Price: $195.00
Related Products: International 404 Clutch

Distributor Drive Shaft

…WDR9, WR9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, Cub LoBoy: Cub Loboy, Wheatland: 400, 450; Replaces: 353934R11 This will fit the listed models using IH Distributor 353898R11. ---This is NOT the shaft that the points contact or…

Product Number: IHS815
Price: $28.95

Creeper Sun Gear Drive Shaft

International / Farmall - Fits: [ 154, 184, 185 (w/ creeper (reduction drive) & updated to 1/8" keyway) ]; Replaces: 55369C2

Product Number: IHS2325
Price: $145.00

Creeper Gear Shaft Spline Drive Gear w/ Bushing

International / Farmall - Fits: [ 154, 184, 185 (w/ creeper (reduction) drive) ]; Replaces: 532461R1

Product Number: IHS2319
Price: $98.50
Related Products: Spline Shaft

Steering Shaft Support Knuckle

International / Farmall - Fits: Cub, Cub LoBoy: Cub Loboy; Replaces: 350902R1, 350902R2, Serviceable but need to bore out hole drive type grease fitting: 350902R3 * Will not fit 154, 184 or 185.

Product Number: IHS844
Price: $28.95
Related Products: Steering Knuckle

Starter Drive Housing

…1108096* Warranty void if broken* The only reasons a starter nose will break is usually the following: bent armature shaft, ignition timing is incorrect, improper drive to ring gear clearance or defective distributor cap / wires cause the engine to kick back.* 2 bolt nose*…

Product Number: IHS1292
Price: $52.95

Bearing, Front, Transmission Spline Shaft

Cub, Cub Loboy, 154, 184, 185 (as a front upper transmission main shaft bearing) ]; Replaces: 351537R91, 544285R91, 758341R91, 767556R91, ST542 JD Industrial - Fits: [ Crawlers: 450, 450B, 450C, 550, 555 (as a steering clutch hub bearing) ], [ 450, 450B, 450C, 550, 555, 555A (as an upper final drive

Product Number: IHS4264
Price: $12.99

Transmission Spline Shaft Oil Seal with retainer & gasket

International / Farmall - Fits: [ Cub, Cub Loboy, 154, 184, 185 (all without creeper drive) ]; Replaces: retainer gasket: 350866R1, 528810R2, retainer with seal: 350865R91, 528810R91 * Note: IH changed the original leather seal design to this modern NBR seal. This kit replaces both style seals.*…

Product Number: IHS3439
Price: $23.70

Transmission Gasket Kit (3-piece kit)

International / Farmall - Fits: Cub, Cub Loboy, [ 154, 184, 185 (without creeper drive) ]; Replaces: 350846R1, 350866R1, 351546R1                            Includes:* (1)…

Product Number: IHS2346
Price: $12.95

Tachometer Cable Connector Housing Retainer Clip (Thrust Stop)

…[ Cub, Cub Loboy, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504 (all gas or LP, when equipped with tachometer) ], 600, 650, [ Wheatland: 400, 450 (all gas or LP, when equipped with tachometer) ]; Replaces: 369693R1 For use with Nylon gear w/ metal shaft.

Product Number: IHS3119
Price: $2.50

Oil Seal

…404 (Top Transmission Shaft Front Seal) ], [ B-250, B-275, B-276, B-414, 2300, 2300A, 354, 364, 384, 424, 434, 444 (Bull Pinion Shaft Bearing Retainer Seal) ], [ Cub, Cub Loboy, 154, 184, 185 (Final Drive Upper Pinion Shaft Seal) ], [ M, MD, MDV, MV (Transmission Counter Shaft Front Seal) ], MTA…

Product Number: ABC1503
Price: $7.99

Oil Seal

…wheel worm shaft) International / Farmall - Fits: Cub (steering wheel worm shaft), Cub Loboy (steering wheel worm shaft, -(WILL NOT FIT 154, 184, 185)-); Replaces: 350892R91, 385703R92 MF Industrial - Fits: [ MF20, MF30, MF40, 2135, 2200, 2500, 3165 (w/ Perkins gas/dsl, as a tach drive plate to…

Product Number: ABC1514
Price: $9.95

PTO Over Running Clutch 1-1/8" - 1-3/8"

…6 Spline* Must have existing hole in pto shaft for roll pin.* For tractors up to  75 horsepower*  6 3/4" overall length*  Includes  2" x 5/16 O.D. roll pin and grease zerk*  May have to shorten equipment drive shaft to compensate for the additional length

Product Number: MIS118
Price: $62.35

PTO Over Running Clutch 1-3/8" - 1-3/8"

…6 Splines* For use on tractors with up to 75 Horsepower*  6-3/4" overall length* Must have existing hole in pto shaft for roll pin.* Includes 2" x 5/16 O.D. Roll Pin & Grease Zerk* May have to shorten equipment drive shaft to compensate for the additional length

Product Number: MIS138
Price: $62.35
Related Products: Pto | Clutch | Pto Clutch

Oil Seal

…as a transmission drive shaft seal for tractors without torque amplifier or independent pro drive: 300, 330, 340, 350, 460, Fits following gas/lp as a front crankshaft seal;: 100, 130, 140, 154, 184, 185, 200, 230, 240, 330, 340, 404, 424, 444, 504, A, AV, B, BN, C, Cub, Cub Loboy, Super A, Super…

Product Number: IHS1307
Price: $8.95

Oil Seal

…when equipped with H.D 2-3/4" O.D. axle) ], 340 (use on the following model when used as a lower steering shaft seal), [ 404, 504 (use on the following model when used as a lower steering shaft seal (when used with 350009R12 cover)) ], 460 (fits as a rear axle outer oil seal with 2-3/4" axle; SN…

Product Number: ABC1565
Price: $13.75

Oil Seal

…PTO output shaft retainer seal (2 used per tractor, sold individually)), WC (Used as a PTO output shaft retainer seal (2 used per tractor, sold individually). Also used as a PTO gearbox stub shaft seal prior to 1935 (2 used per tractor, sold individually). Also used as a belt pulley drive seal prior…

Product Number: ABC1543
Price: $13.95
Related Products: John Deere Oil Seal | Brake Seals | Brakes

John Deere PTO Clutch Repair

Watch this step by step PTO clutch repair on a John Deere 630 by Tyler Buchheist.

Did you find this search useful? Yes No
  • 1
Sort by:
View: Show: per page