Welcome to Steiner Tractor Parts

    1 - 11 of 11 Products >
  1. Fan Assembly
  2. >
  3. all

Fan Assembly

  • 1
Sort by:
View: Show: per page
Showing Products: 1 - 11 Total Products: 11

Farmall Fan Assembly -- Fits Farmall A, B, C, Super A

…Replaces: 131489C91, 70136D, 70212D * Also fits PLYMOUTH & Early SILVER KINGS w/ IXB Hercules flathead engines* 15-1/2" overall fan diameter* 4" fan pulley diameter* 3-5/8" generator pulley diameter* For later serial number tractors, use IHS2081.* Improved sealed bearing,…

Product Number: IHS142
Price: $81.65

Fan Assembly

…This fan is correct for the early Farmall Cub tractors. If you have an International Cub LoBoy, you will need to order ABC099 generator belt.* For later Sn: use IHS2081* This fan assembly has an improved seal bearing, no need to grease.* The pulley has an outside diameter of 3 1/2"* The fan

Product Number: IHS143
Price: $74.95
Related Products: Farmall Fan Pulley | Fan Blade | Ihs143

Fan Assembly

…break, look for the front pulley closest to the fan to be wider than the rear pulley.), [ MC, MI, MT (SN: 10001 & up. Note, 2 different ones were made by JD, in addition to the serial number break, look for the front pulley closest to the fan to be wider than the rear pulley.) ]; Replaces:…

Product Number: JDS542
Price: $69.95
Related Products: John Deere Mc | Fan Blade

Fan Drive Cup

…], 50, 520, 530, 60, 620, 630, [ 70, 720, 730 (all gas, LP, diesel) ]; Replaces: A4059R * 3.590" I.D.* 3.700" O.D.* 0.472" thickNote: Two (2) used per tractor. This part will also fit older serial number models when the fan has been converted to a friction drive fan instead of a rubber mounted fan.

Product Number: JDS3968
Price: $14.95

Fan Drive Pulley Assembly

…Farmall - Fits: [ 3.125 C-C Fan Bolt Pattern: 100, 130, 200, 230, Super A, Super A-1, Super AV, Super AV-1, Super C (Measure Fan Blade Bolt C-C Before Ordering. CAST IRON PULLEYS WITH SEALED BEARING & SPINDLE SHAFT, when used with a water pump) ], [ A, B, C (Measure Fan Blade Bolt C-C Before…

Product Number: IHS2081
Price: $165.75

Bearing Assembly for Governor Shaft, Fan Shaft & Ventilator Pump

…gas, LP, diesel), 730 (gas, LP, diesel); Replaces: Assembly: JD8588, Cup: JD8589, Cone: JD8590, Retainer: JD8591 * 0.750" ID,* 2.080" OD* 0.470" wide outer race* Can be used as a governor shaft, fan shaft and ventilator pump bearing assembly* Two (2) used for each application* 4 used per tractor*…

Product Number: JDS3373
Price: $35.50
Related Products: Fan Shaft Bearing | Governor Bearing

Bearing Assembly for Governor Shaft, Fan Shaft and Ventilator Pump

…to SN: 7221079), Fan & fan shaft only for: R; Replaces: JD7654, JD7654R, JD7655, JD7655R, JD7656, JD7656R, JD7657, JD7657R * 0.750" I.D.* 2.080" O.D.* 0.609" wide outer race* All metal construction* Can be used as a governor shaft, fan shaft and ventilator pump bearing assembly* Two (2) used for…

Product Number: JDS2853
Price: $35.50

Fan Shroud

International / Farmall - Fits: Cub, Cub LoBoy: Cub Loboy; Replaces: 351037R2 Does not fit 154, 184 or 185.

Product Number: IHS621
Price: $84.95
Related Products: Fan Shroud | Farmall A Fan Assembly

How To Install A Water Pump - Antique Tractor Blog

…Disconnect and inspect all of the hoses. If cracked or damaged, replace the hoses. 4) Remove fan blade and pulley if possible. Take care not to damage the radiator. On some models, you must leave the fan assembled while the water pump is on the engine. 5) Remove the old water pump making note of any…

Related Products: Oliver Water Pump | Jd Water Pump

Tach Drive Gear Install on John Deere

Watch and learn as Tyler goes thru the steps to replace the tachometer drive gear on a John Deere 630. These steps apply to John Deere 20 & 30 series row crop tractors. Tyler "The Plow Guy" Buchheit is an expert in John Deere plows and a regular contributor to Green Magazine.

Did you find this search useful? Yes No
  • 1
Sort by:
View: Show: per page