Specials

By Price

Shop By

Ford 2n Crankshaft

Sort By:
View:
Show:
per page
Adjustable Valve Tappet (Lifter)

Adjustable Valve Tappet (Lifter)


Ford - Fits: 1939 through 1952, all with 120 c.i. Flathead engine, 8 used: 2N, 8N, 9N; Replaces: Replaces 8N6500A non-adjustable lifter: A0NN6500A * Sold individuallyNote: Also fits Ford and Mercury Flathead V8 automobile engines, 1932 through 1953, 16 used.
Product Number: FDS3527
Price: $12.85

Related Products: 8n Lifter | Lifter | Ford 8n Lifters

Crankshaft Pulley

Crankshaft Pulley


Ford - Fits: 2N, 8N, 9N; Replaces: 192160, 2N6312 * Includes (4) 1/4"- 28 NF threaded holes for hub when used with front mounted loader* Can also be used on tractors without loaders to replace the sheet metal pulley.
Product Number: ABC021
Price: $33.95

Related Products: 8n Ford Crankshaft Pulley | Ford 8n Pulley | Ford 192

Crankshaft Gear

Crankshaft Gear


Ford - Fits: 2N, 8N, 9N; Replaces: 48-6306, 48-6306A, 486306A * 22 teeth.* (1939-52)
Product Number: FDS2038
Price: $42.50


Ford 9N Complete Engine Gasket Set

Ford 9N Complete Engine Gasket Set


Ford - Fits: 2N, 8N, 9N; Replaces: 8N6008 * For use on either front or side mount distributor engines.--Includes all the gaskets and crankshaft seals necessary for your major engine overhaul except front cover gasket.* Use FDS2431 front cover gasket for 9n, 2n and 8n with front mount distributor.*…
Product Number: FDS1323
Price: $32.80

Related Products: 8n Ford Crankshaft Seal | Ford 8n Gaskets | Ford 8n Gasket Set

Front Hydraulic Pump Drive Shaft

Front Hydraulic Pump Drive Shaft


Ford - Fits: [ 2N, 8N, 9N (Some 1939-1952) ]; Replaces: 194354 * Use with ABC1809 adapter* Use with ABC021 crankshaft pulley* Measure before ordering* 13" Long* 3/4" O.D.* 1 end has 6 splines* Other end has 0.187" keyway* Used with Ford pump drive kits # 19-22, 19-23
Product Number: ABC1820
Price: $36.75

Related Products: Shaft | Abc1820 | Front Hydraulic Pump Drive Shaft

Front Hydraulic Pump Drive Hub Adapter

Front Hydraulic Pump Drive Hub Adapter


Ford - Fits: [ 2N, 8N, 9N (Some 1939-1952 when equipped with ABC021 crankshaft pulley.) ]; Replaces: 192161 Measure old pulley bolt spacing before ordering. * 3-3/8" O.D.* 2-3/8" center to center across bolt holes* 1-5/8" center to center (1 hole to the next)* 3/4" spline I.D.* 6 splines*…
Product Number: ABC1809
Price: $42.50

Related Products: Front Hydraulic Pump Drive Shaft | Loader Pump And Shafts | Hub Loader

Base Engine Kit

Base Engine Kit


Ford - Fits: [ 2N, 8N, 9N (1939-1952) ]; Replaces: wrist pins: 19A6135A, wrist pin bushings: 21A6207B3, wrist pin locks: 786140, gasket set: 8N6008, pistons: 8N6108B, rings: 8N6149B, sleeve: 8N6055B, 81859181 * Basic engine kit includes (4) 0.090" thick sleeves, Standard 3.187" 3-ring pistons, rings…
Product Number: FDS2976
Price: $235.00

Related Products: Ford 8n | Engine Overhaul Kit For Ford 8n | Ford 8n Piston

Base Engine Kit

Base Engine Kit


Ford - Fits: [ 2N, 8N, 9N (1939-1952) ]; Replaces: wrist pin : 19A6135A, wrist pin bushings: 21A6207B3, wrist pin lock: 786140, gasket set: 8N6008, piston: 8N6108B, rings: 8N6149B, sleeve: CONN6055B, 86531518 * Basic engine kit includes (4) 0.040" thick sleeves, Standard 3.187" 3-ring pistons, rings…
Product Number: FDS2970
Price: $235.00

Related Products: Engine Overhaul Kit For Ford 8n | Ford 8n | Ford 8n Engine Overhaul Kit

Ball Bearing

Ball Bearing


…as an inner front wheel bearing, not sealed: 5215 Ford - Fits: Fits following as a PTO shifter support housing bearing with 3 and 4 speed transmissions: 2000 4 cylinder, 2031, [ 2110 4 cylinder, 4110 4 cylinder (through 1964) ], 2121, 2131, 2N, 4031, 4131, 4140, 501, 541, 600, 601, 620, 621, 630,…
Product Number: ABC3437
Price: $5.20

Related Products: Pto Bearing | Hydraulic Pump Bearing | Farmall Cub Transmission


Sort By:
1 - 9 of 9
Show:
per page

All content and images © Steiner Tractor Parts 1660 S. M-13 Lennon, MI 48449 Ph: 800-234-3280 - All Rights Reserved