Our curbside pickup is available while our retail store remains closed to walk in business. Curbside orders must be placed online or by phone before you arrive.
When placing your order by phone (800-234-3280) you will be given a pick up time, if you order online please wait for one of our customer service specialist to contact you when your order is ready for pickup. Thank you for your understanding and patience.
…from 1954 to 1964) ]; Replaces: NCA9282B Ford Industrial - Fits: [ 2030, 2130 (For use on the following gas only models with 134 cubic inch engines from 1954 to 1964) ] * Exact of original* Must remove muffler to install* 1/4" tube* Gates steel fuel line galvanized with Galfan (95% zinc 5% aluminum)
International / Farmall - Fits: [ H, HV (gallon tank to strainer; sn 50866 & up) ], [ Super H, Super HV (gallon tank to strainer; sn 501 - 19233) ]; Replaces: 58367DAX * For distillate or kerosene tractors (tractors with two tanks).* For gas tractors see IHS1487
Ford - Fits: [ 2N, 8N, 9N (1939-1952) ]; Replaces: 86591375, 9N9282A * 1/4" tube with 7/16" - 24 fittings* Gates steel fuel line galvanized with Galfan (95% zinc, 5% aluminum)
International / Farmall - Fits: [ Cub, Cub Loboy (both with vertical exhaust and using original IH carburetor only, will not fit tractors with Zenith carburetors) ]; Replaces: 350968R11 * If your Cub is equipped with a horizontal muffler and IH carburetor, then please see IHS3170.* If your Cub is…
…with 172 cubic inch Gas engine between sn 11977 - 126524) ] * 1/4" line* 15-1/2" overall length (measure along curve)* Fits 1958-1960 (up to SN: 126524)* Measure before ordering* Please view FDS1551 if your fuel line is 5/16".* If your 1/4" fuel line is 16" overall length, then please view FDS1546.
…various models Massey Harris - Fits various models Minneapolis Moline - Fits various models Oliver - Fits various models * 1/8" NPT male to 5/16" compression fitting for 5/16" fuel lineNote: This fitting is for tractors & equipment using ABC092 and ABC281 sediment bowls with 5/16" fuel lines.
JD Industrial - Fits: MI Fits John Deere - M, MC, MT; Replaces: AM707T, L587T * 1/4" Stainless Steel fuel line* Fittings included
…555B, 555C, 6500, 655, 655A, 655B, 655C, 750, 7500, 755, 755A, 755B Fordson - Fits: [ Dexta, Super Dexta (1957-64) ], [ Major, Super Major (1952-64) ] This fuel shut off valve for Ford tractors is composed of pot metal with brass valve and plastic screen. * 1/2" pipe thread inlet* 5/16" tube outlet
Fits John Deere - [ 4000, 4020 (gas, diesel) ]; Replaces: AR32199, AR45529 * Approximately 37-1/2" long straight across* 44" long with bends
Fits John Deere - 4230 (up to SN: 15214, gas/diesel); Replaces: AR59139 * Approximately 36" long straight across* 45" long with bends
…1954 to 1957) ]; Replaces: 86593249, NCA9282D * Fits models with sediment bowl attached to carburetor* 1/4" fuel line* See FDS1551 if your fuel line is 5/16"* 16" overall length (measure along curve)* If your 1/4" fuel line is 15-1/2" overall length, then please view FDS1549* Measure before ordering
…F40, TE20, TO20, TO30, TO35 (Gas) Massey Harris - Fits: 50 (Gas); Replaces: 180141M91 * 3/8" NPT fuel inlet* 1/4" fuel line outlet* Mesh filter screen securedPlease use caution when threading the fuel line into the sediment bowl. Warranty void if the threads are damaged from cross threading.
…350623R11, 356355R11 * Fits gasoline applications only = 1 fuel tank* Does not fit distillate tractors = 2 fuel tanks (1 is a small starting tank) * 5/16" fuel line (outside diameter of the fuel line)* Include Two Compression Fittings* Please check line diameter before ordering* Galfan coating
Fits John Deere - A (All Fuel SN: 655572 - 662728), A (Gas SN: 477000 - 622820); Replaces: AA5067 * Must be used with a 3-way valve for All Fuel applications or elbow #B2526R (not available from STP) from sediment bowl to line for gas.
Allis Chalmers - Fits: WD; Replaces: 220636, 70220636 * 23" overall length* 1/4" tube outside diameter* 1/4" 45 degree inverted flare nuts* 70910161 elbows not included, available by special order
…4040, 4130 4 cylinder (with 5/16" fuel line only) ] * Fits 1960-1964 models with sediment bowl attached to carburetor.* If your fuel line is 1/4", then please view FDS1546 and FDS1549. * For models with flip over center fuel shut off valve* 5/16" fuel line* 172 C.I. with ESN: 126525 & up
International / Farmall - Fits: [ Cub, Cub Loboy (both with underslung (horizontal) exhaust and original IH carburetor, will not fit tractors with Zenith carburetors) ]; Replaces: 362358R11, 369992R11 * 5/16" O.D. fuel line* NOTE: Will not fit 154, 184, 185 or tractors with Zenith carburetors.
Allis Chalmers - Fits: B, C, CA, D10, D12, D14 (Auxiliary engine only, not tractor), IB; Replaces: 70207278, 70215478, 70243108 * 13-1/8" overall length* 1/4" tube O.D.* 1/4" compression fittings* Note: You may have to trim to fit.
Fits John Deere - 60 (up to sn 6028468 with manual sediment bowl); Replaces: AA5349R * Bare metal* Approximately 23-3/4" length (counting all of the bends) or 18" straight measurement * Bare metal* Approximately 23-3/4" length (counting all of the bends) or 18" straight measurement
International / Farmall - Fits: H (Gas only; not for distillate or kerosene); Replaces: 56451DX * Fits from fuel strainer to carburetor* 25" Length* 5/16" Fuel Line with two compression fittings.* Fits gas tractors with 1 tank.* If you need one for distillate or kerosene tractors with 2 tanks see…
Fits John Deere - [ 2510, 2520 (both gas, diesel) ]; Replaces: AR38268 * Approximately 41-1/4" long straight across* 49-1/2" with bends
Fits John Deere - Rowcrops: 3020 (gas, diesel); Replaces: AR32451, AR45528 * Approximately 40-1/2" long straight across* 47-1/2" long with bends
…* 5/16" O.D.* Note: Will not fit 154, 184 or 185.* Use with our IHS417 Zenith carburetor* If you have an IH carburetor, then you need IHS3165 fuel line for vertical exhaust or IHS3170 fuel line for horizontal exhaust * 5/16" O.D.* Note: Will not fit 154, 184 or 185 or tractors with IH carburetors.
…models Massey Ferguson - Fits various models Massey Harris - Fits various models Minneapolis Moline - Fits various models Oliver - Fits various models * Fits models using 3/8" fuel lines* Must splice fuel line to use* Includes hose and clamps* Use to help keep rust and dirt out of the carburetor