1-800-234-3280

    1 - 24 of 478 Products >
  1. Clutch
  2. >
  3. all

Clutch

Sort by:
View: Show: per page
Showing Products: 1 - 24 Total Products: 478

Clutch Disc

AC Industrial - Fits: some early models using 9" diameter clutch; Note: measure before ordering as 2 different diameters were used: HD3 , I600 Allis Chalmers - Fits: some early models using 9" diameter clutch; Note: measure before ordering as 2 different diameters were used: B, C, CA, D10 (up to SN:…

Product Number: ABC3502
Price: $36.95

Clutch Kit

…TO30 (W/ 9" Single Clutch & 1 3/8" Splined Hub) ]; Replaces: 180250M91, 180263M91, 183209M91, 185923M91, 193621M91, 513576M91, TO7550, TO7563 Measure clutch spline diameter before ordering (1-3/8"), some tractors were 1-1/8" across clutch splines. Includes new spring loaded clutch disc, pressure…

Product Number: MFS1994
Price: $171.50

Clutch Kit

…Replaces: 193930M92, 512355M91, 516068M93, 526666M93 * New dual clutch kit includes clutch disc, pressure plate assembly, pilot bearing, throwout bearing and alignment tool* 10 Splines* 11" 10 spline rigid disc* 11" 10 spline double clutch pressure plate* 0.485" width across forged finger * 12…

Product Number: MFS2091
Price: $306.95

Clutch Throw Out Bearing (IH Torque Amplifier Release Bearing)

…11" Clutch & No Reverser, Also Fits Steering Clutch) ], 440 (W/ Single Clutch), 450 (Engine & Steering Clutch), [ 450B, 450C, 450D, 450E, 450G (Engine Clutch) ], Hi Cycle: 600 Fits John Deere - L, LA, LI, M, [ MC, 40 (Engine & Steering Clutch) ], MI, MT, 1010 (W/ 11" Single Clutch &…

Product Number: ABC496
Price: $19.95

Clutch Disc (new not rebuilt)

…Cub and Lo-boy as the clearance is very limited and if the pressure plate fingers are not properly adjusted the clutch disc could ride on them resulting in damage. This clutch disc does not fit International 154, 184 or 185. If you have one of these models please use IHS1861.  

Product Number: MHS076
Price: $29.95

Clutch Kit (Rockford Clutch)

…Throwout Bearing: 350921R11, Clutch Disc: 351773R91, Pressure Plate: 351760R91, 350921R11 Our clutch kit includes: 1 new clutch disc, 1 new pressure plate, 1 new throwout bearing (graphite like original), 1 clutch pilot bushing and an alignment tool. The woven clutch disc is 6.5" OD with 10 splines…

Product Number: IHS645
Price: $175.80
Related Products: Farmall Cub Clutch | Farmall Cub | Cub Clutch

New Clutch Kit

…9" 10 spline clutch) ], 2N (1942 - 47, with 3 speed transmission & 9" 10 spline clutch), [ 600, 620, 630, 640, 700, 740, 800, 820, 840, 900 (1954 - 57, with 4 speed transmission & 9" 10 spline clutch) ], 8N (1947 - 52, with 4 speed transmission & 9" 10 spline clutch), 9N (1939 - 43,…

Product Number: FDS259
Price: $146.95

Dual Stage Clutch Kit

…6 pad button clutch disc, new PTO disc, new dual stage pressure plate, new clutch throw-out bearing, new PTO release bearing, new pilot bearing & clutch lineup tool. Clutch dimensions:* 12" O.D. * 1-1/6" inside diameter 16 spline hub* solid center* 6 pad button clutch discPressure…

Product Number: JDS3683
Price: $695.00

Clutch Kit

…have  a 300, 350, 460, 544 or 606, order ABC2992 pilot bearing.* If you have a 330, 340 or 504, order ABC3000 pilot bearing.  * Dimensions:* 10-1/2" O.D.* 1.125" clutch disc spline I.D.* 10 spline clutch disc* 1.687" pressure plate spline I.D.* 16 pressure plate splines

Product Number: IHS2996
Price: $279.95

Clutch Facing

Fits John Deere - A, AO, AR, D (sn 109944 and up), G, GP, 60, 620, 630, 70, 720, 730; Replaces: C614R, R90215 * Two used per tractor; sold individually* 10" OD* 6-3/4" ID* 0.150" thick* The side with the grooves faces the driving disc* For use with our JDS021 slider disc.

Product Number: JDS538
Price: $11.50

Clutch Repair Farmall Cub

Learn how to replace a clutch in a Farmall Cub tractor. Rachel shows you how to replace a clutch in a Farmall Cub tractor. She also shows you how to do an adjustment and goes thru troubleshooting steps.This step by step tractor repair video is one in a series in the "Wrenching with Rachel" series on…

PTO Clutch Drive Disc -- Fits JD 80, 820, 830

Fits John Deere - 80, 820 2 cylinder, 830 2 cylinder, 840 (2 cylinder); Replaces: R1902R * 12 used per tractor; sold individually

Product Number: JDS1080
Price: $16.50

Single and Two Stage Clutch Replacement on a Farmall

Watch this quick tutorial on how to replace the clutch on a Farmall or International Harvester letter series tractor. This video shows both the single and two stage clutch replacement.

Related Products: Farmall M | John Deere B Clutch | Ford Clutch

Clutch Slider Disc -- Fits JD 60, 620, 630, 70, 720, 730

Fits John Deere - [ 60, 620, 630 (1 used per tractor) ], [ 70, 720, 730 (2 used per tractor) ]; Replaces: A4355R * SOLD INDIVIDUALLY* 0.247" thick

Product Number: JDS021
Price: $59.60
Related Products: John Deere 720 Clutch

Clutch Drive Disc -- Fits JD 70, 720, 730

Fits John Deere - 70, 720, 730; Replaces: F1228R

Product Number: JDS020
Price: $124.95
Related Products: John Deere 720 Clutch

PTO Clutch Plate (with facing) -- Fits JD 50, 60, 520, 620 and more!

Fits John Deere - 50, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820 2 cylinder, 830 2 cylinder, 840 (2 cylinder); Replaces: AA5258R, AR1293R, RE29794 * 2 used per tractor; sold individually.

Product Number: JDS1076
Price: $25.75

Clutch Drive Disc

Fits John Deere - G, GH (ALL sn 13804 and up), GM, GN, GW; Replaces: AF820R, Casting Number: F798R

Product Number: JDS1023
Price: $194.95
Related Products: John Deere G Clutch

Clutch Release Yoke, Pair

…up), Cub LoBoy: Cub Loboy; Replaces: Left: 353239R2, Right: 353240R2 * Do not start engine without checking clutch pressure plate finger clearance. Failure to do so could damage the pressure plate and throw out bearing.  Adjust clutch linkage per instructions.* Will not fit 154, 184 or 185.

Product Number: IHS498
Price: $30.95

Clutch Dust Cover

IH Industrial - Fits: 2404 International / Farmall - Fits: A, AV, B, BN, C, Cub (sn 35351 and up), Super A, Super C, 100, 130, 140, 200, 230, 240, 404; Replaces: 57579DX --------------(WILL NOT FIT 154, 184, 185)-----------

Product Number: IHS627
Price: $12.50

Clutch Pedal Return Spring

Fits John Deere - [ 2510, 3010, 4010 (With Syncro Range) ], 3020 (Rowcrop and Standard (up to SN: 122999) with Syncro Range. Does not fit any utilities), 4020 (Up to SN: 200999 with Syncro Range); Replaces: R26833

Product Number: JDS954
Price: $10.99

Clutch Lever Pivot Bolt

JD Miscellaneous - Fits: Stationary Engine: W (Gas/Diesel/LP) Fits John Deere - [ A, AN, ANH, AW, AWH, BO, BR, G, GH, GM, GP, GW, R, 520, 530, 60, 620, 630, 80, 820 2 cylinder, 830 2 cylinder (Gas/Diesel/LP) ], [ AO, AOS (Gas/Diesel/LP up to SN: 259999) ], AR (Gas/Diesel/LP up to SN: 271999), D…

Product Number: JDS887
Price: $17.95

Clutch Inspection Cover Plate

Allis Chalmers - Fits: B, C, CA, D10, D12, D17, D19, IB; Replaces: 208465, 70208465 Includes the integral spring steel clips

Product Number: ACS189
Price: $14.95
Related Products: Allis Chalmers Ca

Cub 154 Clutch Brake Puck

International / Farmall - Fits: 154, 185; Replaces: 404642R1 Sold individually, 2 used per tractor.

Product Number: IHS1194
Price: $9.50
Related Products: International Cub Loboy 154

Clutch And Brake Pedal Shaft

International / Farmall - Fits: [ Super C, 200, 230 (with DISC BRAKES) ]; Replaces: 355971R1

Product Number: IHS1374
Price: $65.00
Did you find this search useful? Yes No
Sort by:
View: Show: per page