Welcome to Steiner Tractor Parts
…* Head includes guides and seats* Will bolt directly onto a gas engine for increased horse power. Must use with premium gas to avoid detonation.* Must order IHS2227 LP high compression valve train kit which is required for engines switching from a gas cylinder head to the LP cylinder head as…
…John Deere - M, MC, MT, 320, 330 (GAS), 40; Replaces: AM239T, M1768T, M56T * The valve seats must be final machined and the guides must be reamed to fit the valve stems.* Does not include valves, springs or studs.* Customer is responsible for all final machining, including head surfacing if needed
International / Farmall - Fits: Cub, Cub Loboy, 154, [ 184, 185 (Will fit with casting number 355691R2) ]; Replaces: 251228R1, 351779R91, 355691R2
Ford - Fits: 2N, 8N, 9N; Replaces: 8N6050, 8N6050A, 9N6050 FOR ENGINES WITH FRONT OR SIDE MOUNTED DISTRIBUTORS
…match the guides/seats. * Includes manifold studs.* Includes adapter bushings if needed to fit both 7/16" and 1/2" head bolts.* For valve train kit order FDS464.* Includes temperature sender adapter bushing.* Final head bolt torque is 70 Ft lbs.* Valve lash gap is 0.015"
Follow the steps to complete and in frame engine overhaul on your Farmall tractor. Watch as Rachel goes over the steps on this 756 and points out some helpful tips.
…- Fits: 440 (Early) Fits John Deere - 420, 430; Replaces: AM3058T, M3035T, M3995T The valve seats must be final machined and the guides must be reamed to fit the valve stems. Does not include valves, springs or studs.CUSTOMER IS RESPONSIBLE FOR ALL FINAL MACHINING including head surfacing if needed.
…], 2000 4 cylinder (Up to 4" bore 1953-64) * For cylinder heads with 7/16" head bolts. If you have 1/2" head bolts which was used on late 600 and 700 models, please use FDS430.* Fits early 134 C.I.. gas engines w/ small chamber heads casting # EAE6085E, EAE6090F & 7/16" head bolts.
…C26 Intercontinental* Long model A & AW tractors built in Tarboro N.C.* Many Lincoln welders* 17-3/8" head gasket length.* For use on the listed brands and models with F124 c.i., F140 c.i. or F162 c.i. flathead Continental gas engines.* Includes all gaskets needed to replace cylinder head.
Fits John Deere - [ A, AI, AN, ANH, AW, AWH ((up to SN: 487999)) ], [ AO, AOS, AR ((up to SN: 259999)) ]; Replaces: A4239R, A588R, AA1811R, AA4959R 2 used per tractor, sold individually. ***WONT FIT AFTERMARKET HEISLER HEADS ***
Case - Fits: [ 730, 730 Comfort King, 731, 732, 733, 734, 740, 741, 742, 743, 744, 930, 930 Comfort King, 931, 932, 940, 941 (all gas, LP, diesel) ]; Replaces: 1349383C1, A21517, A23118 Case Combine - Fits: 800 Case Industrial - Fits: [ Backhoes: 680, 680CK (all gas, diesel) ], [ Wheel Loaders:…
Case - Fits: S, SC, SC-3, SC-4, SI, SO; Replaces: 4057AA * Includes all gaskets necessary to change cylinder head.* Replaces Victor Reinz HS1771* 0.090" thick, metal jacketed head gasket* Fits up to 3-3/4" bore
Allis Chalmers - Fits: (ALL with 116 & 125 c.i. Engines up to 3.625" Bore): B, C, CA, IB, RC; Replaces: 224768, 70225768 * Includes all gaskets required when replacing the cylinder head.* Torque cylinder head bolts to 60 FT-LBS.* Head gasket is 18" O/A length.
…354475R1, 354475R91, 354475R92, 354475R93, 354475R94, 354475R95 Fits C-152, C-164, C-169 & C-175 Cubic Inch Engines. Includes all gaskets needed to replace cylinder head. This includes a premium metal jacketed head gasket. For an economy version with a graphite head gasket see IHS3356.
Fits John Deere - A (Styled sn 488000 and up AH), AN, [ AO, AR (sn 260000 - 281999) ], AW, AWH; Replaces: Head Gasket: A2329R
IH Industrial - Fits: same as IHS811 except has graphite coated head gasket: I4, U4 International / Farmall - Fits: same as IHS811 except has graphite coated head gasket: 300, 350 (GAS), H, HV, O4, OS4, Super H, Super HV, Super W4, W4; Replaces: 354475R1, 354475R91, 354475R92, 354475R93, 354475R94,…
Case - Fits: VA, VAC, VAC-11, VAC-12, VAC-13, VAC-14, VAE, VAH, VAI, VAIW, VAIW-3, VAO, VAO-15, VAS; Replaces: VT3228, VT3246, VT3312, VT3379, VT3394, VTA871 INCLUDES ALL GASKETS NEEDED TO REPLACE THE CYLINDER HEAD
Case - Fits: [ C, CC, CC-3, CC-4, CCS, CH, CI, CO, CO-CV, D, DC, DC-3, DC-4, DCS, DEX, DH, DO, DO-VS, DO/STD, DOEX, DV (with 260 CI engine) ]; Replaces: 4056AA, A189556 Water Inlet To Head Gasket NOT Included
Ford - Fits: 2N, 8N, 9N; Replaces: 7HA6521, 8BA6571, 8N6051A, 9N6022, 9N9448 Set includes: cylinder head gasket, (2) valve cover side plate gaskets, (8) valve guide seals, (2) manifold gaskets, (1) governor gasket
International / Farmall - Fits: F20, Regular, T20; Replaces: 10321DE, 10378D, 10418D, 29760D * 4.300" gasket bore size* Multi layer composite head gasket for superior sealing* Resists coolant, oil and gasoline
…400, 450 (GAS & LP) ], Wheatland: 400 (W400, GAS & LP), 450 (W450, GAS & LP); Replaces: 354476R95 Fits International Harvester models with C248, C264 & C281 cubic inch engines. Includes all gaskets needed to replace cylinder head. This includes the PREMIUM METAL JACKETED head gasket
…(W400, with D264, D281 diesel engines), 450 (W450, with D264, D281 diesel engines); Replaces: 261339R92, Head Gasket: 53436DE, 119166A1 * This is for 4 Cylinder engines with sleeves that protrude above the block. (4-7/16" HEAD GASKET BORE)* Also order IHS1858 lower end set to make a full gasket set
…800299, 70800258, 70800295, 70800297, 70800299 Massey Harris - Fits: Pony; Replaces: Valve Grind Kit: 840741M1, Individual gasket: 1500073M1, 1500078M1, 1500074M1, 21209A * Also fits EARTHMASTER Model C and CH* Includes:* valve cover gasket* head gasket* manifold gasket* Fits N62 engines
…Industrial - Fits: Terra trac crawler: 600 Skidder (Dsl) MH Industrial - Fits: 404 (gas, LP or diesel) Massey Harris - Fits: [ 44, 444, 44 Special (gas, LP or diesel) ]; Replaces: 840677M91 Fits Continental H260, HD260, H277, & Early HD277 Engines Using 24 1/4" Long Head Gasket