…Distributor & Clip Held Cap), Swather: 34 (W/ Delco-Remy 1111716 distributor & Clip Held Cap); Replaces: Condenser: 1023370M1, Point Set: 1750502M91, Points & condenser: 839012M91, Rotor: 1750875M1, 1750498M1 Massey Harris - Fits: 50 (W/ Delco 1112557, 1112570, 1112585 Distributor &…
…(Sn: 56635 & up) * For 6 cylinder models listed* Also fits distributor: 368051R1, 401107R1* this is also correct for some 4 cylinder engines with distributor number 376554R91 or 376555R92.* Point Gap = 0.020"* Includes: rotor, point set and condenser
…4030 4 cylinder, 4040, 4130 4 cylinder (4 cylinder) ] * For tractors with SIDE MOUNTED distributor* 1950 to 1964* For tractors with generator/alternator mounted on the LEFT side as sitting in the seat.* Includes points, condenser and rotor* Use with ABC159 rotor clip* Point Gap = 0.025"
…held cap* Works ONLY on listed 4 cylinder models* Includes Auto lite AL386 spark plugs, heavy duty points, condenser and rotor button* Spark plug thread size is 18 MM diameter* 1/2" Reach and 7/8" Hex* Replaces Champion D16 and D21* 0.025" spark plug gap* 0.020" point gap
…F163 c.i.d. flathead Continental enginesOnly fits listed tractor models with Autolite distributor. Please note that this will not fit Model IGZ or IGW distributors.* Only fits distributors with 3-3/8" OD cap.* 0.020" point gap Kit contains point set, vibration resistant condenser and rotor.
…Fits John Deere - M, MC, MI, MT, 320, 330, 40, 420, 430 Kit contains: Rotor, points, condenser, spark plugs. For Delco distributors thru 1963. * Spark Plugs: 14MM, 7/16" Reach, 13/16" hex* Spark Plug Gap: 0.025"* Point Gap: 0.020"
…models with Delco distributor with screw held cap* Spark plug size: 18MM thread diameter, 1/2" reach, 7/8" hex* Spark plug cross reference to Autolite 386* Spark plug gap: 0.025"* Point gap: 0.020" Contains: Spark plugs, heavy duty points, condenser and rotor
…9N18354, A0NN12107A, A0NN12300A, A0NN12300A, B2NN12200A * For tractors with generator/alternator mounted on the RIGHT side as sitting in the seat.* 1939-50* Point Gap = 0.015"* For tractors with FRONT mount distributor (distributor is mounted DIRECTLY under the fan blade/water pump)
…350, 400, 404, 424, 444, 450, 505, 600, 650 (with IH 353898R11 DISTRIBUTOR) ], Cub (with J4 MAGNETO or IH 353898R11 DISTRIBUTOR), Cub LoBoy: Cub Loboy (with J4 MAGNETO or IH 353898R11 DISTRIBUTOR); Replaces: 353172R91 * Point Gap = 0.013"* Fits IHC J4 magneto and IH 353898R1 distributors
…sitting in the seat.* 1939 to 1950* For tractors with FRONT mount distributor (distributor is mounted DIRECTLY under the fan blade/water pump)* Kit includes rotor, points, condenser, 437 Autolite spark plugs and ABC064 4-piece distributor gasket set.* 0.025" spark plug gap* 0.015" point gap
…1111729 Delco* Gibson Model i with 1111721 or 1111730 Delco* Silver King Models 42, 149, 150, 249, 346, 349, 444, 446: all with 1111526 Delco* Triumph Spitfire automobiles (1968-75) 4 cylinder models* Many older automotive and truck applications using Delco clip held distributors.* Point gap 0.020"
…3550, 420, 420, 4400, 445, 4500, 515, 530A, 531, 535, 540, 540A, 545, 550, 555, 555A, 555B (Fits the following 3 cylinder models from 1965 - 1980) ] * Fits 3 cylinder engines 1965-82* Kit includes:* Points* Condenser* Rotor* (3) Autolite 405 spark plugs* Spark plug and point gap = 0.025"
…models * 2 terminal style* Reduces voltage to distributor points* 2.0 Ohms of resistance* It does not make any difference which end of the resistor wires to the coil or which end wires to the ignition switch. * Used to step down 12-volt battery.*…
…4030 4 cylinder, 4040, 4130 4 cylinder (4 cylinder) ] * For tractors with side mount distributor (8n is only model that can have either a front mount or side mount depending on serial number)* For tractors with generator/alternator mounted on the left side as sitting in the seat* Point gap 0.025"
Fits John Deere - [ 70, 720, 730 (Diesel Pony start) ], [ 80, 820 2 cylinder, 830 2 cylinder (with Pony Start) ]; Replaces: R12006, X9021 * 2 required per tractor* Sold individually* Gap points at 0.020"* Fits our JDS103 Pony Distributor* WICO magneto part number X9021
IH Industrial - Fits: I12 International / Farmall - Fits: F12, F14, F20, F30, O12, Regular (SOME), T20, W12, W14, W40, McCormick Deering: 10-20, [ 15-30, 22-36 (SOME) ]; Replaces: 21367D, 21367DA, 353173R91 * Point Gap = 0.013"* Fits IHC F4 and F6 magnetos
…C series magneto ) ], L (When equipped with C series magneto SN: 640000 & up), LA (When equipped with C series magneto SN: 4533 & up) Oliver Industrial - Fits: [ AG, HG (When equipped with C 1113, 1113B series magneto) ] Wico - Replaces: X3343 * Point gap: 0.015"* Fits WICO C series magneto
…Wico "X" series magnetos: XH894, XH477B, XH1042, XH3001, XH909* Also fits Wico Distributor: XB4001LWill not fit 4001B distributors. * Point Gap = 0.015"* Also fits following model numbers: XB2065, XH10, XH10B, XH11, XH16, XH17, XH19, XH19B, XH19C, XH20, XH22, XH23, XH29, XH29B, XH32,…
…Minneapolis Moline - Fits: R, Z ((using FM-J, FM-JE, JM-JG, FM-T with clockwise rotation)) * Fits Fairbanks Morse Magnetos with a clockwise rotation and a 2 piece cap: FM-J, FM-J4, FM-J4A, FM-J4B, FM-JE, JM-JG, FM-T, FMJ4-B3* Replaces Fairbanks Morse part number R2437* Point Gap = 0.020"
…the application information.* Replaces the points and condenser with an electronic module.* Fits distributors with a clip held cap.* Clockwise rotation* Increase spark life and horsepower with a hotter spark to ignite todays fuels.* Never change points again.* Easy installation; fits…
…distributor number is listed in the application information.* Replaces the points and condenser with an electronic module.* Increase spark life and horsepower with a hotter spark to ignite todays fuels.* Never change points again.* Easy installation; fits entirely inside the distributor.
… DELCO distributors only* Spark Plug Dimensions: 7/8" - 18 Thread w/ 5/8" Reach, 15/16" Hex* Kit contains: Rotor, Points, Condenser, And Spark Plugs * Spark Plug Gap = .030"* Point Gap = .020"* Will NOT fit magneto ignitions.
…only* Spark plug dimensions: 18 MM, 1/2" Reach 7/8" Hex * Kit contains: Rotor, Points, Condenser, (2) Spark Plugs* Spark Plug Gap = (A thru G: 0.030" Gap), (50 thru 730: 0.025" Gap)* Point Gap = 0.020"* Will NOT fit magneto ignitions.