1-800-234-3280

Welcome to Steiner Tractor Parts

    1 - 24 of 191 Products >
  1. Pistons
  2. >
  3. all

Pistons

Sort by:
View: Show: per page
Showing Products: 1 - 24 Total Products: 191

Sleeve and Piston Kit

IH Combines - Fits: [ 62, 64, 76 ('some'; with C-113 engine up to SN: 310300 or C-123 engine up to SN: 35830; with block casting #'s 6342D, 6342DB, 6342DE, 6342DG, 6342DH, 251069R1, 366204R1, 366204R2, 367825R1 and others using 3.30" lower sleeve seal O.D.) ] IH Industrial - Fits: [ I12, I14…

Product Number: IHS3060
Price: $268.50

Sleeve and Piston Kit with 3-7/16" Overbore

IH Industrial - Fits: [ I4, U4 (gas with C-152 engine) ] International / Farmall - Fits: [ H, HV, O4, OS4, W4 (gas with C-152 engine) ]; Replaces: 374312R93, PK156 * Please be careful installing the sleeves. If the bore is not cleaned or honed properly, then the sleeves will break if you…

Product Number: IHS3093
Price: $349.50

Base Engine Kit

…wrist pin bushings: 21A6207B3, wrist pin lock: 786140, gasket set: 8N6008, piston: 8N6108B, rings: 8N6149B, sleeve: CONN6055B, 86531518 * Basic engine kit includes (4) 0.040" thick sleeves, Standard 3.187" 3-ring pistons, rings and wrist pins, pin bushings and complete gasket set with crankshaft…

Product Number: FDS2970
Price: $235.00

Rebore Kit (0.125" overbore)

… 0.838" crown to top ring.* The aluminum pistons are designed for increased compression (approximately 6.5 to 1 compression ratio).* Kit includes pistons, rings, wrist pins, and clips.* Other sizes and models available by special order.* Piston to cylinder clearance is .001 per inch of bore

Product Number: JDS3043
Price: $550.00

Base Engine Kit

…C123 engine SN: 35830 - up: 100, 130, 140, 200, 230, 240, C, Super A, Super C * Each kit includes (4) sleeves, 3.25" bore flat top pistons, piston ring set, piston pins, pin retainers, pin bushings, sleeve sealing rings and complete gaskets.* Fits block casting 354898R1, 354898R2, 356318R2,…

Product Number: IHS3374
Price: $399.99

Sleeve and Piston Kit

IH Combines - Fits: [ 62, 64, 76 ('some'; with C-113 engine SN: 310300 & up or C-123 engine SN: 35830 & up; with block casting #'s 354898R1, 354898R2, 356318R2, 356318R3, 364111R2, 366825R1 and others using 3.43" lower sleeve seal O.D.) ] IH Industrial - Fits: [ T4, U2, U2A ('some'; with…

Product Number: IHS3064
Price: $268.50

Piston Ring Set 4-Cylinder

…different piston manufactures, there can be as many as 8 different ring sets available for one particular engine. To ensure you order the correct rings, we will need the following information: 1.) bore size, 2.) thickness of each ring, 3.) how many of each ring thickness per piston. Rings can not…

Product Number: FDS2088
Price: $74.85
Related Products: Piston Rings | Rings | Ford 8n Piston

Base Engine Kit

…wrist pin bushings: 21A6207B3, wrist pin locks: 786140, gasket set: 8N6008, pistons: 8N6108B, rings: 8N6149B, sleeve: 8N6055B, 81859181 * Basic engine kit includes (4) 0.090" thick sleeves, Standard 3.187" 3-ring pistons, rings and wrist pins, pin bushings and complete gasket set with crankshaft…

Product Number: FDS2976
Price: $235.00

Rebore Kit (.125" overbore)

…MT, 320, 330, 40; Replaces: AP338-125, RKA1276-125, SP338-125 * This 2-cylinder rebore kit has a 0.125" overbore (4.125" diameter).* Kit includes aluminum pistons, rings, wrist pins, and clips.* Other sizes and models available by special order.* Piston to cylinder clearance is .001 per inch of bore

Product Number: JDS3059
Price: $264.95

Rebore Kit (.090" overbore)

…330, 40; Replaces: AP338-90, RKA1276-90, SP338-90 * This 2-cylinder rebore kit has a 0.090" overbore (4.090" diameter).* Kit includes aluminum pistons, rings, wrist pins, and clips.* Other sizes and models available by special order.* Piston to cylinder clearance is .001 per inch of bore

Product Number: JDS3057
Price: $264.95

Hydraulic Lift Piston

…with O-Ring and back up washer ABC315 and ABC316 ) Massey Harris - Fits: 50 (Optional, when used with O-Ring and back up washer ABC315 and ABC316 ) * For applications using 2 1/2" diameter lift piston * Some later applications may use 2 different diameter pistons, measure before ordering.

Product Number: ABC314
Price: $26.85
Related Products: Abc314 | Hydraulic O Ring | Lift Piston

Rebore Kit (0.045" overbore)

…0.045" overbore (4.7325" diameter).* The aluminum pistons are designed for increased compression (approximately 6.8 to 1 compression ratio).* Kit includes pistons, rings, wrist pins, and clips.* Other sizes and models available by special order.* Piston to cylinder clearance is .001 per inch of bore

Product Number: JDS3049
Price: $374.93

Sleeve and Piston Kit with 4" Overbore

…C.I. gas models with sleeved engine, 1954 - 1964; 4-cylinder) ] * This 4-cylinder kit has a 4" overbore.* Includes sleeves, aluminum pistons, piston ring sets, piston pins, and pin retainers.* Most other sets are available by special order.* NOTE: Verify engine is sleeved before ordering.* Please be…

Product Number: FDS3090
Price: $298.50

Rebore Kit (.045" overbore)

…330, 40; Replaces: AP338-45, RKA1276-45, SP338-45 * This 2-cylinder rebore kit has a 0.045" overbore (4.045" diameter).  Kit includes aluminum pistons, rings, wrist pins, and clips. Other sizes and models available by special order.* Piston to cylinder clearance is .001 per inch of bore

Product Number: JDS3055
Price: $264.95

Sleeve and Piston Kit with 3-3/8" Overbore

…Z129 or Z134 Continental gas engine: 50 * This 4-cylinder kit has a 3.375" overbore and cupped head aluminum pistons.* Includes sleeves, aluminum pistons, piston ring sets, piston pins, pin retainers, and sleeve sealing rings.* Most other sets available by special order.* Please view instructions…

Product Number: MFS3102
Price: $329.95

O-Ring Only (For Hydraulic Lift Piston)

…Dia. piston : 202 (To Sn: 301660) Massey Ferguson - Fits: Optional on following when used with ABC314, 2 1/2" Dia. piston : 50, F40, TE20, TEA20, TO20, TO30, TO35 (To Sn: 179304); Replaces: 835126M1 * For Ford applications, this O-Ring installs toward head of the lift cylinder piston (the #ABC316…

Product Number: ABC315
Price: $1.29

Piston Ring Set 4-Cylinder

…different piston manufacturers, there can be as many as 8 different ring sets available for one particular engine. To ensure you order the correct rings, we will need the following information: 1.) bore size, 2.) thickness of each ring, 3.) how many of each ring thickness per piston. Rings can not…

Product Number: IHS2106
Price: $55.10
Related Products: Cub Piston Rings | Cub | Ih Cub

Piston Ring Set 4-Cylinder

…different piston manufacturers, there can be as many as 8 different ring sets available for one particular engine. To ensure you order the correct rings, we will need the following information: 1.) bore size, 2.) thickness of each ring, 3.) how many of each ring thickness per piston. Warranty is…

Product Number: FDS2100
Price: $73.95
Related Products: Rings | Piston Rings

Piston Ring Set 4-Cylinder

…different piston manufacturers, there can be as many as 8 different ring sets available for one particular engine.* To ensure you order the correct rings, we will need the following information: 1.) bore size, 2.) thickness of each ring, 3.) how many of each ring thickness per piston. Rings…

Product Number: IHS2104
Price: $55.10

Sleeve and Piston Kit (4-cylinder)

AC Combines - Fits: [ E, EII, EIII, Super 100 (4-cylinder gas; with 226 C.I. gas power unit) ], Self Propelled: 110 (4-cylinder gas; with 226 C.I. gas power unit) AC Industrial - Fits: Loader: TL10 (4-cylinder gas; late; with 226 C.I. gas power unit), [ TL11, TL12 (4-cylinder gas; with 226 C.I. gas…

Product Number: ACS3056
Price: $399.95

Sleeve and Piston Kit with 3-1/2" Overbore

…(with 134 C.I. gas models with sleeved engine, 1953 - 1964) ] * This 4-cylinder kit has a 3.500" overbore.* Includes sleeves, aluminum pistons, piston ring sets, piston pins, and pin retainers.* Most other sets are available by special order. NOTE: Verify engine is sleeved before ordering.Please be…

Product Number: FDS3087
Price: $312.50

Piston Ring Set 2-Cylinder

…0.250" compression rings, (2) 0.250" oil rings) ] * 5-1/2" bore, (5) 0.250" rings per piston* Measure old rings before ordering. Do not order by tractor model only.* Due to the many different piston manufacturers, there can be as many as 8 different ring set available for one particular…

Product Number: JDS2094
Price: $160.00

Rebore Kit (0.125" overbore)

…0.125" overbore (4.625" diameter).* The aluminum pistons are designed for increased compression (approximately 6.3 to 1 compression ratio).* Kit includes pistons, rings, wrist pins, and clips.* Other sizes and models available by special order.* Piston to cylinder clearance is .001 per inch of bore

Product Number: JDS3047
Price: $432.85
Related Products: John Deere B Piston Rings

Base Engine Kit

…kits: 830697M91, Pin bushings: 840708M91 Massey Harris - Fits: all with Z134 Continental gas engine: 50 * Each kit includes (4) sleeves, pistons, pins, piston ring sets, pin retainers, pin bushings, (8) sleeve sealing rings and complete gasket set with seals.* Order rod & main bearings…

Product Number: MFS3406
Price: $399.99
Did you find this search useful? Yes No
Sort by:
View: Show: per page