1-800-234-3280

Welcome to Steiner Tractor Parts

    1 - 24 of 66 Products >
  1. Sleeve
  2. >
  3. all

Sleeve

Sort by:
View: Show: per page
Showing Products: 1 - 24 Total Products: 66

Sleeve and Piston Kit with 4" Overbore

sleeves, aluminum stepped head pistons, piston ring sets, piston pins and pin retainers.* Most other sets available by special order.* Sleeve O.D. (cold) 4.124"* 1.312" wrist pin O.D.* Please be careful installing the sleeves. If the bore is not cleaned or honed properly, then the sleeves

Product Number: IHS3096
Price: $368.50

Cylinder Sleeve, Liner

Ford - Fits: 2N, 8N, 9N; Replaces: 81859187, 86531518, C0NN6055B * Thick: 0.040"* Bore: 3.187"* Prefinished O.D.: 3.268"* Bare sleeve only* Use with FDS2970 base engine kit* (1939-52)Note: Measure sleeve thickness before ordering.

Product Number: FDS4156
Price: $26.95

Sleeve and Piston Kit

…using 3.43" lower sleeve seal O.D. This 4-cylinder piston kit has a 3.250" overbore, stepped head aluminum piston and a 3.43" lower sleeve seal O.D. Includes sleeves, pistons, piston ring sets, piston pins, pin retainers and sleeve sealing rings. If you need 3.30" lower sleeve seal O.D., then please…

Product Number: IHS3064
Price: $268.50
Related Products: Super A | Ihs3060 | Farmall Super C

Base Engine Kit

…Each kit includes (4) sleeves, 3.25" bore flat top pistons, piston ring set, piston pins, pin retainers, pin bushings, sleeve sealing rings and complete gaskets.* Fits block casting 354898R1, 354898R2, 356318R2, 356318R3, 364111R2, 366825R1 and others using 3.43" lower sleeve seal OD.* Verify block…

Product Number: IHS3374
Price: $399.99

Sleeve / Donut

IH Combines - Fits: 915 International / Farmall - Fits: 1066, 1466, 1566, 4166, 4186, 4366, 4386; Replaces: 675317C2 * This exhaust sleeve fits our IHS146 exhaust elbow.* The exhaust sleeve uses two IHS160 sealing rings.  

Product Number: IHS159
Price: $37.75
Related Products: 1066 Exhaust | Farmall Engine Sleeve

Cylinder Sleeve, Liner

Ford - Fits: 2N, 8N, 9N; Replaces: 81859181, 8N6055B, APN6055A * Thick: 0.090"* Bore: 3.187"* Prefinished O.D.: 3.368"* Bare sleeve only* Use with FDS2976 base engine kit* (1939-52)Note: Measure sleeve thickness before ordering.

Product Number: FDS4160
Price: $26.95

Sleeve and Piston Kit with 3-1/2" Overbore

…Includes sleeves, aluminum pistons, piston ring sets, piston pins, and pin retainers.* Most other sets are available by special order. NOTE: Verify engine is sleeved before ordering.Please be careful installing the sleeves. If the bore is not cleaned or honed properly, then the sleeves will…

Product Number: FDS3087
Price: $312.50

Base Engine Kit

…set: 8N6008, piston: 8N6108B, rings: 8N6149B, sleeve: CONN6055B, 86531518 * Basic engine kit includes (4) 0.040" thick sleeves, Standard 3.187" 3-ring pistons, rings and wrist pins, pin bushings and complete gasket set with crankshaft seals. Measure sleeve thickness BEFORE ordering.* NOTE: Order rod…

Product Number: FDS2970
Price: $235.00

Sleeve and Piston Kit

…6342D, 6342DB, 6342DE, 6342DG, 6342DH, 251069R1, 366204R1, 366204R2, 367825R1 and others using 3.30" lower sleeve seal O.D.) ] IH Industrial - Fits: [ I12, I14 ('some'; using 3.30" lower sleeve seal O.D.; with IH overhead valve engine, with block casting # 3193D, 3193DC, 4818D, 4818DX ) ], [ T4, U2,…

Product Number: IHS3060
Price: $268.50
Related Products: Farmall | Ihs3060 | Pistons

Touch Control Piston Sleeve Boot

…Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200; Replaces: 352005R1, 352005R3, wire: 19526D, 68251D * 5-1/2" long* These piston sleeve boots are made of leather and include the wire, just like original. * Simplified installation* 12" of wire included* The wire should…

Product Number: IHS3508
Price: $18.50

Sleeve and Piston Kit (4-cylinder)

…283616, 70283616, PK120 * This 4-cylinder kit has a 4-1/8" overbore and aluminum flat top pistons.* Includes sleeves, pistons, piston ring sets, piston pins, pin retainers, and sleeve sealing rings.* NOTE: Most other sets available by special order.* Need replacement rings for this kit? See…

Product Number: ACS3052
Price: $435.40

Sleeve and Piston Kit (4-cylinder)

…70284361, PK121 * This 4-cylinder piston kit has a 4.1/8" overbore and aluminum concave head pistons.* Includes sleeves, pistons, piston ring set, piston pins, pin retainers, and sleeve sealing ring.* NOTE: Most other sets available by special order.* Need replacement rings for this kit? order…

Product Number: ACS3056
Price: $399.95

Touch Control Piston Sleeve Boot

International / Farmall - Fits: C, Cub, Cub Loboy (-(WILL NOT FIT 154, 184, 185)-), Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200; Replaces: 364833R1, 364833R2 * Sold individually.* 1 used for Cub, 2 used for all others.* Made of rubber.* 2.425" overall length.* 0.875" hole…

Product Number: IHS2024
Price: $9.95

Clutch Release Sleeve Guide, Bushing

IH Industrial - Fits: 2404 International / Farmall - Fits: A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, 100, 130, 140, 200, 230, 240, 404; Replaces: 43546D * 1.470" O.D.* 5.067" long* 1.280" I.DNote: This is the tube that the throw out bearing carrier slides on. It presses…

Product Number: IHS3468
Price: $28.50

Sleeve Sealing O Ring For 1 Cylinder

…with 3.30 lower sleeve diameter, measure before ordering. ) ], Swather: 161 (w/ C113 or C123 engines and with 3.30 lower sleeve diameter, measure before ordering. ); Replaces: 24434D * Contains 1 O-ring for 1 sleeve,* 0.220" thick.* Must be used with engines with 3.30" lower sleeve diameter.* Fits…

Product Number: IHS2117
Price: $3.95

Sleeve Sealing O Ring For 1 Cylinder

…lower sleeve diameter. Measure before ordering!) ], Swather: 161 (w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering!); Replaces: 354881R1, 367799R1 * Contains 1 O-ring for 1 sleeve,* 0.230" thick* Must be used with engines with 3.43" lower sleeve

Product Number: IHS2121
Price: $5.95
Related Products: Sleeve O-ring | Sleeve Seal | Sleeve O Ring

Sleeve Sealing O Rings For 1 Cylinder

…170, 175, D17, WC (SN 65528 and up), WD, WD45, WF; Replaces: 70207436, 70227500 * Sold per cylinder.* Order 4 for 4-cylinder engine.* For sleeve with 0.093" sealing ring groove.* Will also fit early WC below Sn: 65527, if using later Sn:  sleeves w/ 0.093" deep sealing ring grooves.

Product Number: ACS2113
Price: $6.95
Related Products: Sleeve O-ring | Sleeve O Ring

Sleeve Sealing O Rings For 1 Cylinder

AC Industrial - Fits: Gas, LP w/ G138 & G149 Engines: I40 Allis Chalmers - Fits: Gas, LP w/ G138 & G149 Engines: D10, D12, D14, D15 (Up to SN: 9000), H3 (Up to SN: 6959); Replaces: 70227563 Sold per cylinder, order 4 for 4-cylinder engine.

Product Number: ACS2109
Price: $5.50
Related Products: Sleeve Seal

Sleeve Sealing O Rings For 1 Cylinder

Allis Chalmers - Fits: All w/ 116 & 125 " Engine: B, C, CA, IB, RC; Replaces: 70206666, 70227501 Sold per cylinder, order 4 for 4-cylinder engine.

Product Number: ACS2111
Price: $6.95
Related Products: Sleeve O Ring | Sleeve O-ring

Sleeve Sealing O Ring For 1 Cylinder

…- Fits: Backhoe: 2-62 (All Gas, LP, Diesels Except Field Boss) White - Fits: 2-44 (All Gas, LP, Diesels) * Sold by cylinder.* Order 4 for a 4 cylinder or 6 for a 6 cylinder.* Fts sleeves w/ 4.028" seal O.D. at groove* Includes 2 O-rings* 0.100" thick.* Also replaces Clevite MAHLE 223-7137

Product Number: ABC2115
Price: $8.95
Related Products: Oliver Super 55 Seals

Sleeve Sealing O Ring For 1 Cylinder

…880 (Gas, LP & Diesel. Sold per cylinder. Order 6 for 6 cylinder. ) ], [ 1650, 1655 (Gas & LP only. Sold per cylinder order 6 for 6 cylinder) ]; Replaces: 1K179, 1KA179 fits sleeves w/ 4.276" seal O.D. groove, sold per cylinder, Order 6 for 6-cyl. ***Includes (2) O-rings, 0.100" thick.***

Product Number: ABC2107
Price: $3.50
Related Products: Z134 Engine | Sleeve O-ring

Sleeve and Piston Kit with 3-5/16" Overbore

…PK106, Z120T-101 * This 4-cylinder kit has a 3-5/16" overbore and flat head aluminum pistons.* Includes sleeves, aluminum pistons, piston ring sets, piston pins, pin retainers, and sleeve sealing rings.* Most other sets available by special order.* Please view instructions under our instruction…

Product Number: MFS3099
Price: $371.55
Related Products: Continental Z120 | Z120 | Engine Sleeves

Sleeve and Piston Kit (3-7/16" overbore)

…282941, 70282941, PK122 * This 4-cylinder kit has a 3-7/16"" overbore and flat top aluminum pistons.* Includes sleeves, pistons, piston ring sets, piston pins, pin retainers, and sleeve sealing rings.* NOTE: Most other sets available by special order.* Please view instructions under our instruction…

Product Number: ACS3050
Price: $328.50

Sleeve and Piston Kit with 3-3/8" Overbore

…gas engine: 50 * This 4-cylinder kit has a 3.375" overbore and cupped head aluminum pistons.* Includes sleeves, aluminum pistons, piston ring sets, piston pins, pin retainers, and sleeve sealing rings.* Most other sets available by special order.* Please view instructions under our instruction…

Product Number: MFS3102
Price: $329.95
Did you find this search useful? Yes No
Sort by:
View: Show: per page