Rims Wheels

Rear Rim 12X38

…x 38 double bevel rim) ]; Replaces: A28272, O10922AB Case Industrial - Fits: 800 Skidder ( & others with heavy cast centers using 12 x 38 double bevel rim) Cockshutt - Fits: [ 35, 40, 50, 550, 560, 570 ( & others with heavy cast centers using 12 x 38 double bevel rim) ]; Replaces: Z969…
Product Number: WHS037
Related Products: 12x38 Rim | John Deere Rear Rims | Rear Rim 18 X 38

Rear Rim 12X36

…36" double bevel rim) ]; Replaces: G46172, g45716 International / Farmall - Fits: [ Farmall Rowcrop: 340, 574, 674 (and others using 12 x 36" double bevel rim) ]; Replaces: 372319R91 Fits John Deere - [ 2010, 2020, 2030, 3010, 520, 530 (and others using 12 x 36" double bevel rim) ]; Replaces: B3773R…
Product Number: WHS036
Related Products: 12 X 36 Rims | John Deere 2010 | Farmall Rims

3 X 19 Front Wheel With Large 9 5/8" Pilot Hole (5 Bolt)

…9N1015A 3" wide x 19" diameter 5 lug bolt holes 9-5/8" I.D. pilot hole For 4.00 x 19" tires. To Determine the width of rim, measure on the inside from bead to bead, not outside to oustide. Here is a video depicting the measurement of rims: rim measurement. Not designed for tubeless tires.  
Product Number: FDS220
Related Products: 9n Front Rims | 9n Wheel | Ford 9n Rim

Rear Rim 11" X 28"

…6 loop rim) ] MF Industrial - Fits: [ 2135, 2200 (and others using 11 x 28 6 loop rim) ] Massey Ferguson - Fits: [ FE35, 135, 150, 20, 230, 235, 240, 245, 35, 50 (and others using 11 x 28 6 loop rim) ], [ Ferguson: F40, TE20, TEA20, TO20, TO30, TO35 (and others using 11 x 28 6 loop rim) ]; Replaces:…
Product Number: WHS012
Related Products: Rim 11 28 | 11x28 Rim | Ford 8n Rear Wheel

4.25 x 16, (5 Lug) Front Wheel

Allis Chalmers - Fits: [ D10, D12 (When Equipped With 16" Rim) ], D14, D15, D17 ((Early w/ 5 Lug Rim)), WC, WD, WD45, WF; Replaces: 232832, 707232832 Cockshutt - Fits: Co-Op (with Flathead engines by Duplex Machinery made in Battle Creek, Arthurdale, Shelbyville, St. Paul etc 1937 thru 1950): C…
Product Number: ACS009
Related Products: 6 X 16 Rim | Tires | Allis Chalmers D17 Wheel

Rear Spinout Rim 12 X 26

…RAILS --- HOLES FOR STOP ADJUSTMENT ARE DRILLED 90 DEGREE PERPENDICULAR TO SIDE OF RIM NOT 90 TO RAIL --- STOP HOLES ARE ANGLED***To Determine the width of rim, measure on the inside from bead to bead, not outside to outside. --- USE MIS109 STOP FOR THIS RIM -- NOT DESIGNED FOR TUBELESS APPLICATIONS
Product Number: WHS007
Related Products: Ford 861 | Spinout Rim | Rims

Rear Rim 10 X 34

…430 Massey Harris - Fits: 22 (MUST WELD OLD CENTER INTO RIM) * This rim measures 10" x 34" inside bead to bead.* You must weld your old center into this new rim.* The inside diameter of this rim is 32".* To Determine the width of rim, measure on the inside from bead to bead, not outside to outside*…
Product Number: WHS034
Related Products: Wheel | John Deere Rear Rims | Rims

Rear Rim 9" X 36"

…WILL BOLT ON, BUT THE CLAMPS ON OUR RIM ARE MORE CENTERED THAN THE ORIGINAL, THE ORIGINAL RIM CLAMPS AT THE OUTER EDGE)) ], Super C, 200, 230, 240, 404, Farmall: C; Replaces: 352806R91 * 6 CLAMPS --- 9" x 36" --- NOTE: CLAMPS ARE WELDED TO RIM (15 3/4" C-C mounting holes)*…
Product Number: WHS025
Related Products: Rear Rim | Farmall Rear Rim | Farmall Super C Rear Rims

Rear Rim 9" X 28"

…Loop Rim), Serviceable for early: WD (Some, Using 9" Wide x 28" Diameter 6 Loop Rim), [ Serviceable: RC, WC, WF (Some, Using 9" Wide x 28" Diameter 6 Loop Rim) ] Avery - Fits: [ A, BG (Some, Using 9" Wide x 28" Diameter 6 Loop Rim) ], [ Avery: BF, R (Some, Using 9" Wide x 28" Diameter 6 Loop Rim) ];…
Product Number: WHS016
Related Products: Rear Wheels | Rear Rim | International 350 Utility

Rear Wheel Rim Clamp Bolt

…MV, Super W9, Super WD9, Super WDR9, Super WR9S, W4, W6, W6TA, W6TA (Diesel), W9, WD6, WD9, WDR9, WR9, WR9S, Farmall Rowcrop: 300 (up to sn 3726), 400 (up to sn 5180); Replaces: 13491R1, 48985DA 6 used per wheel. Sold Individually. 4.25" X 5/8-11 NC. 1" square head. Grade 5. Single dot square head.
Product Number: IHS877
Related Products: Farmall H Rear Wheel Clamp | Farmall Wheel Bolts | Farmall H Wheel Bolts

Front Wheel / Rim Clamp

IH Industrial - Fits: I6, ID6 International / Farmall - Fits: A, AV, B, BN, C, H, HV, M, MD, MV, O4, O6, ODS6, OS4, OS6, Super WD9, W4, W6, W9, WD6, WD9, WDR9, WR9S, [ 100, 130, 200, 230 (Some) ], 600, 650, 660, Wheatland: 400, 450; Replaces: 48976DA * 3 or more used per rim.* Sold individually.
Product Number: IHS212
Related Products: Ihs212 | Wheel Clamps | Farmall Front Rims

Front Felt Dust Seal, for crankshaft and wheels

Allis Chalmers - Fits: D10 (Front felt hub seal for SN: 3501 - 9000 & for High Clear up to SN: 9000), D12 (Front felt hub seal for SN: 3001 - 9000 & for High Clear up to SN: 9000), [ D14, RC, WC, WD, WD45, WF (Front felt hub seal) ], D15 (Up To SN: 9000), D17 (Front felt hub seal up to SN:…
Product Number: ABC270
Related Products: Abc270 | Allis Chalmers Wc Seals | Front Wheel Seal

Rear Rim - 10x24

Fits John Deere - M, MI, MT, 320, 330, 40, 420, 430 * This rim measures 10" x 24" inside bead to bead.* It has a blank center, you must weld your old center into this rim. * The inside diameter measures 22".* To Determine the width of rim, measure on the inside from bead to bead, not outside to…
Product Number: WHS038
Related Products: John Deere M Rim | John Deere Rims | Wheel

Rear Rim 10X38

…10 x 38 double bevel rim), [ 400, 402, 410, 411, 412 ( & others with heavy cast centers using 10 x 38 double bevel rim) ], 401 ( & others with heavy cast centers using 10 x 38 double bevel rim ), 403 ( & others with heavy cast centers using 10 x 38 double bevel rim); Replaces: O10920AB…
Product Number: WHS035
Related Products: Double Bevel Rims | John Deere 50 Rear Rims | Rims John Deere 60

Rim Bolt Assembly

International / Farmall - Fits: A, B, BN, Super A, Super A-1, 100, 140, 240 Also fits Farmall 24" rims Except Cub. Will also fit Ford applications. Will not fit WHSOO3 Cub rim. 4-1/2" x 5/8"-11 NC thread Sold individually, includes hex bolt, flat washer & hex nut. 
Product Number: MIS062
Related Products: Farmall Wheel Bolts | Rim Bolts

Rear Spinout Rim Stop

…Minneapolis Moline - Fits various models Oliver - Fits various models * For 90 degree drilled rim rail* For spin out rims with 4 sided rectangle shaped stops. * Limited applications, verify style before ordering* Will  NOT fit the spinout rims that we offer.* Most rims use our MIS109 stop.
Product Number: MIS108
Related Products: Mis108 | John Deere 2010 | Spinout Rim