1-800-234-3280

Welcome to Steiner Tractor Parts

    1 - 24 of 33 Products >
  1. Cylinder Sleeves
  2. >
  3. all

Cylinder Sleeves

Sort by:
View: Show: per page
Showing Products: 1 - 24 Total Products: 33

Cylinder Sleeve, Liner

Ford - Fits: 2N, 8N, 9N; Replaces: 81859187, 86531518, C0NN6055B * Thick: 0.040"* Bore: 3.187"* Prefinished O.D.: 3.268"* Bare sleeve only* Use with FDS2970 base engine kit* (1939-52)Note: Measure sleeve thickness before ordering.

Product Number: FDS4156
Price: $26.95

Sleeve and Piston Kit with 4" Overbore

sleeves, aluminum stepped head pistons, piston ring sets, piston pins and pin retainers.* Most other sets available by special order.* Sleeve O.D. (cold) 4.124"* 1.312" wrist pin O.D.* Please be careful installing the sleeves. If the bore is not cleaned or honed properly, then the sleeves

Product Number: IHS3096
Price: $368.50

Base Engine Kit with 3-1/2" Overbore

Ford - Fits: all with 134 C.I. gas, LP series 1953 - 1964: 2000 4 cylinder, 2031, 2110 4 cylinder, 2111, 2120 4 cylinder, 2121, 2131, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 741, 771, Golden Jubilee, Jubilee, NAA, NAB; Replaces: 309519, 309553,…

Product Number: FDS3457
Price: $378.50

Sleeve and Piston Kit with 3-5/16" Overbore

…PK106, Z120T-101 * This 4-cylinder kit has a 3-5/16" overbore and flat head aluminum pistons.* Includes sleeves, aluminum pistons, piston ring sets, piston pins, pin retainers, and sleeve sealing rings.* Most other sets available by special order.* Please view instructions under our instruction…

Product Number: MFS3099
Price: $371.55
Related Products: Continental Z120 | Z120 | Engine Sleeves

Sleeve Sealing O Ring For 1 Cylinder

…lower sleeve diameter. Measure before ordering!) ], Swather: 161 (w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering!); Replaces: 354881R1, 367799R1 * Contains 1 O-ring for 1 sleeve,* 0.230" thick* Must be used with engines with 3.43" lower sleeve

Product Number: IHS2121
Price: $5.95
Related Products: Sleeve Seal | Sleeve O Ring | Super A

Sleeve and Piston Kit with 3-1/2" Overbore

…(with 134 C.I. gas models with sleeved engine, 1953 - 1964; 4 cylinder) ]; Replaces: CPN6055A, PK110 Ford Industrial - Fits: [ 2030, 2130 (with 134 C.I. gas models with sleeved engine, 1953 - 1964) ] * This 4-cylinder kit has a 3.500" overbore.* Includes sleeves, aluminum pistons, piston ring sets,…

Product Number: FDS3087
Price: $312.50

Base Engine Kit

sleeve thickness BEFORE ordering.* NOTE: Order rod and main bearings separate to make an out-of-frame- kit, if valve train kit is needed order FDS466.* Wrist pin bushings (FDS3716) may need to be sized after installed.* Make sure to lightly hone or clean out the cylinders before installing sleeves.*

Product Number: FDS2970
Price: $235.00

Sleeve and Piston Kit with 4" Overbore

…1871, 1881, 4040 (with 172 C.I. gas models with sleeved engine, 1954 - 1964) ], [ 4030 4 cylinder, 4130 4 cylinder (with 172 C.I. gas models with sleeved engine, 1954 - 1964; 4-cylinder) ] * This 4-cylinder kit has a 4" overbore.* Includes sleeves, aluminum pistons, piston ring sets, piston pins,…

Product Number: FDS3090
Price: $298.50

Sleeve and Piston Kit

…using 3.43" lower sleeve seal O.D. This 4-cylinder piston kit has a 3.250" overbore, stepped head aluminum piston and a 3.43" lower sleeve seal O.D. Includes sleeves, pistons, piston ring sets, piston pins, pin retainers and sleeve sealing rings. If you need 3.30" lower sleeve seal O.D., then please…

Product Number: IHS3064
Price: $268.50
Related Products: Super A | Ihs3060 | Farmall A Piston Kit

Sleeve and Piston Kit (4-cylinder)

…70284361, PK121 * This 4-cylinder piston kit has a 4.1/8" overbore and aluminum concave head pistons.* Includes sleeves, pistons, piston ring set, piston pins, pin retainers, and sleeve sealing ring.* NOTE: Most other sets available by special order.* Need replacement rings for this kit? order…

Product Number: ACS3056
Price: $399.95
Related Products: Allis Chalmers | Wd45 Overhaul Kit | Pistons

Sleeve Sealing O Ring For 1 Cylinder

…with 3.30 lower sleeve diameter, measure before ordering. ) ], Swather: 161 (w/ C113 or C123 engines and with 3.30 lower sleeve diameter, measure before ordering. ); Replaces: 24434D * Contains 1 O-ring for 1 sleeve,* 0.220" thick.* Must be used with engines with 3.30" lower sleeve diameter.* Fits…

Product Number: IHS2117
Price: $3.95

Sleeve and Piston Kit (4-cylinder)

…283616, 70283616, PK120 * This 4-cylinder kit has a 4-1/8" overbore and aluminum flat top pistons.* Includes sleeves, pistons, piston ring sets, piston pins, pin retainers, and sleeve sealing rings.* NOTE: Most other sets available by special order.* Need replacement rings for this kit? See…

Product Number: ACS3052
Price: $435.40

Cylinder Sleeve, Liner

Ford - Fits: 2N, 8N, 9N; Replaces: 81859181, 8N6055B, APN6055A * Thick: 0.090"* Bore: 3.187"* Prefinished O.D.: 3.368"* Bare sleeve only* Use with FDS2976 base engine kit* (1939-52)Note: Measure sleeve thickness before ordering.

Product Number: FDS4160
Price: $26.95

Sleeve and Piston Kit with 3-7/16" Overbore

…stepped head pistons.* Includes sleeves, aluminum pistons, piston ring sets, piston pins, and pin retainers.* Most other sets available by special order.* Please be careful installing the sleeves. If the bore is not cleaned or honed properly, then the sleeves will break if you apply too…

Product Number: IHS3093
Price: $349.50

Sleeve Sealing O Rings For 1 Cylinder

…170, 175, D17, WC (SN 65528 and up), WD, WD45, WF; Replaces: 70207436, 70227500 * Sold per cylinder.* Order 4 for 4-cylinder engine.* For sleeve with 0.093" sealing ring groove.* Will also fit early WC below Sn: 65527, if using later Sn:  sleeves w/ 0.093" deep sealing ring grooves.

Product Number: ACS2113
Price: $6.95
Related Products: Sleeve O Ring

Sleeve Sealing O Ring For 1 Cylinder

…- Fits: Backhoe: 2-62 (All Gas, LP, Diesels Except Field Boss) White - Fits: 2-44 (All Gas, LP, Diesels) * Sold by cylinder.* Order 4 for a 4 cylinder or 6 for a 6 cylinder.* Fts sleeves w/ 4.028" seal O.D. at groove* Includes 2 O-rings* 0.100" thick.* Also replaces Clevite MAHLE 223-7137

Product Number: ABC2115
Price: $8.95
Related Products: Oliver Super 55 Seals | Case 530

Sleeve Sealing O Ring For 1 Cylinder

…265 6 cylinder gas. Sold per cylinder. Order 6 for 6 cylinder) Oliver - Fits: [ Super 88, 1600, 88, 880 (Gas, LP & Diesel. Sold per cylinder. Order 6 for 6 cylinder. ) ], [ 1650, 1655 (Gas & LP only. Sold per cylinder order 6 for 6 cylinder) ]; Replaces: 1K179, 1KA179 fits sleeves w/ 4.276"…

Product Number: ABC2107
Price: $3.50
Related Products: Z134 Engine

Sleeve Sealing O Rings For 1 Cylinder

AC Industrial - Fits: Gas, LP w/ G138 & G149 Engines: I40 Allis Chalmers - Fits: Gas, LP w/ G138 & G149 Engines: D10, D12, D14, D15 (Up to SN: 9000), H3 (Up to SN: 6959); Replaces: 70227563 Sold per cylinder, order 4 for 4-cylinder engine.

Product Number: ACS2109
Price: $5.50
Related Products: Sleeve Seal

Sleeve Sealing O Rings For 1 Cylinder

Allis Chalmers - Fits: All w/ 116 & 125 " Engine: B, C, CA, IB, RC; Replaces: 70206666, 70227501 Sold per cylinder, order 4 for 4-cylinder engine.

Product Number: ACS2111
Price: $6.95
Related Products: Sleeve O Ring

Cylinder Head Gasket Set

…(W400, with D264, D281 diesel engines), 450 (W450, with D264, D281 diesel engines); Replaces: 261339R92, Head Gasket: 53436DE, 119166A1 * This is for 4 Cylinder engines with sleeves that protrude above the block. (4-7/16" HEAD GASKET BORE)* Also order IHS1858 lower end set to make a full gasket set

Product Number: IHS1855
Price: $219.95

Cylinder Head Gasket Set

…gasket* (1) Oil pan gasket* (2) Oil pump gasket* (4) Rear main* (1) Rear main* (4) Rear main cap seals* (1) Rear main cap seal* (1) Timing cover gasket* (1) Timing cover seal* (1) Transmission seal* (1) Washer* (1) Water pump gasket* (1) Water pump gasket* (1) Water pump gasket* (1) Wear sleeve

Product Number: IHS1665
Price: $43.50
Related Products: C135 | Ihs1665 | International Head Gasket

Sleeve and Piston Kit (3-7/16" overbore)

…282941, 70282941, PK122 * This 4-cylinder kit has a 3-7/16"" overbore and flat top aluminum pistons.* Includes sleeves, pistons, piston ring sets, piston pins, pin retainers, and sleeve sealing rings.* NOTE: Most other sets available by special order.* Please view instructions under our instruction…

Product Number: ACS3050
Price: $328.50

Sleeve and Piston Kit with 3-3/8" Overbore

…gas engine: 50 * This 4-cylinder kit has a 3.375" overbore and cupped head aluminum pistons.* Includes sleeves, aluminum pistons, piston ring sets, piston pins, pin retainers, and sleeve sealing rings.* Most other sets available by special order.* Please view instructions under our instruction…

Product Number: MFS3102
Price: $329.95

John Deere 2010 Review - Antique Tractor Blog

…through #2 hole between the cylinder and the sleeve. Health is not good haven’t tried to pull the plate , but thinking that the water is coming through the sleeve wall, so trying to find a sleeve plate I didn’t know that it didn’t have individual sleeves would love to hear from…

Related Products: Deck Plate
Did you find this search useful? Yes No
Sort by:
View: Show: per page