1-800-234-3280

Welcome to Steiner Tractor Parts

    1 - 14 of 14 Products >
  1. Sleeve O ring
  2. >
  3. all

Sleeve O ring

  • 1
Sort by:
View: Show: per page
Showing Products: 1 - 14 Total Products: 14

Sleeve Sealing O Rings For 1 Cylinder

Allis Chalmers - Fits: All w/ 116 & 125 " Engine: B, C, CA, IB, RC; Replaces: 70206666, 70227501 Sold per cylinder, order 4 for 4-cylinder engine.

Product Number: ACS2111
Price: $6.95

Sleeve Sealing O Ring For 1 Cylinder

…lower sleeve diameter. Measure before ordering!) ], Swather: 161 (w/ C113, C123 and C135 gas or LP engines and with 3.43" lower sleeve diameter. Measure before ordering!); Replaces: 354881R1, 367799R1 * Contains 1 O-ring for 1 sleeve,* 0.230" thick* Must be used with engines with 3.43" lower sleeve

Product Number: IHS2121
Price: $5.95

John Deere 2010 Review - Antique Tractor Blog

…Generation line, and the 2010 included a new engine design. The engine had an inventive deck plate to hold the sleeves in. The deck plate rested directly on top of the sleeves, using some O rings to make a seal. This is another one of those ideas that sounds great on paper but doesn’t work as well…

Related Products: John Deere 2010

Sleeve Sealing O Rings For 1 Cylinder

AC Industrial - Fits: Gas, LP w/ G138 & G149 Engines: I40 Allis Chalmers - Fits: Gas, LP w/ G138 & G149 Engines: D10, D12, D14, D15 (Up to SN: 9000), H3 (Up to SN: 6959); Replaces: 70227563 Sold per cylinder, order 4 for 4-cylinder engine.

Product Number: ACS2109
Price: $5.50

Sleeve Sealing O Rings For 1 Cylinder

…170, 175, D17, WC (SN 65528 and up), WD, WD45, WF; Replaces: 70207436, 70227500 * Sold per cylinder.* Order 4 for 4-cylinder engine.* For sleeve with 0.093" sealing ring groove.* Will also fit early WC below Sn: 65527, if using later Sn:  sleeves w/ 0.093" deep sealing ring grooves.

Product Number: ACS2113
Price: $6.95

Sleeve and Piston Kit with 4" Overbore

sleeves, aluminum stepped head pistons, piston ring sets, piston pins and pin retainers.* Most other sets available by special order.* Sleeve O.D. (cold) 4.124"* 1.312" wrist pin O.D.* Please be careful installing the sleeves. If the bore is not cleaned or honed properly, then the sleeves

Product Number: IHS3096
Price: $368.50

Sleeve and Piston Kit

…using 3.43" lower sleeve seal O.D. This 4-cylinder piston kit has a 3.250" overbore, stepped head aluminum piston and a 3.43" lower sleeve seal O.D. Includes sleeves, pistons, piston ring sets, piston pins, pin retainers and sleeve sealing rings. If you need 3.30" lower sleeve seal O.D., then please…

Product Number: IHS3064
Price: $268.50

Sleeve Sealing O Ring For 1 Cylinder

…with 3.30 lower sleeve diameter, measure before ordering. ) ], Swather: 161 (w/ C113 or C123 engines and with 3.30 lower sleeve diameter, measure before ordering. ); Replaces: 24434D * Contains 1 O-ring for 1 sleeve,* 0.220" thick.* Must be used with engines with 3.30" lower sleeve diameter.* Fits…

Product Number: IHS2117
Price: $3.95
Related Products: Cylinder Sleeves

Sleeve Sealing O Ring For 1 Cylinder

…880 (Gas, LP & Diesel. Sold per cylinder. Order 6 for 6 cylinder. ) ], [ 1650, 1655 (Gas & LP only. Sold per cylinder order 6 for 6 cylinder) ]; Replaces: 1K179, 1KA179 fits sleeves w/ 4.276" seal O.D. groove, sold per cylinder, Order 6 for 6-cyl. ***Includes (2) O-rings, 0.100" thick.***

Product Number: ABC2107
Price: $3.50
Related Products: Z134 Engine

Sleeve Sealing O Ring For 1 Cylinder

…- Fits: Backhoe: 2-62 (All Gas, LP, Diesels Except Field Boss) White - Fits: 2-44 (All Gas, LP, Diesels) * Sold by cylinder.* Order 4 for a 4 cylinder or 6 for a 6 cylinder.* Fts sleeves w/ 4.028" seal O.D. at groove* Includes 2 O-rings* 0.100" thick.* Also replaces Clevite MAHLE 223-7137

Product Number: ABC2115
Price: $8.95
Related Products: Case 580ck | Oliver Super 55 Seals | Case 530

Rachel Gingell, Author at Antique Tractor Blog

…with the engine. I’d start with a 301 combine engine (non-sleeved). Put in some 806 pop-up pistons with domes. They’ll fit without the sleeves and be very powerful. Carburation is a game-changer. If the club you’re pulling with doesn’t require a stock manifold, then switch to…

Touch Control Hydraulic Repair Farmall Cub

Watch as Rachel from the Steiner Tractor TV wrenching with Rachel series walks you thru the steps to make the repair to your broken touch control hydraulics. This is a complicated repair with many small steps, but with some time and patience you will save a considerable amount of money by doing it…

Iowa State University - Project Update - Antique Tractor Blog

…before thanksgiving break we discovered the o-rings that seal our wet sleeves are leaking coolant into our oil. With that being said, I’m not sure if we will need just the o-rings or a complete new set of sleeves with o-rings. Rest assured, we will be rebuilding it the right way to insure…

More Power from a Ford Jubilee - Antique Tractor Blog

…the new 2019 mid November when they arrive. Have a great day. http://www.steinertractor.tv/ Reply * George Fischer 02/11/2019 - 06:33 Can new 172 sleeves and pistons be installed in the original Jubilee engine block ? Reply * Tom Kearns 11/09/2016 - 12:02 Hello Mike I have a 860 serial 16516 .The…

Did you find this search useful? Yes No
  • 1
Sort by:
View: Show: per page