1-800-234-3280
X
Thanks for signing up!
Use code MAIL5 for $5 off your order.
X

Search #Delivery and learn how to receive FREE DELIVERY on retail orders by Economy, Standard and Truck!

    1 - 24 of 166 Products >
  1. Tools
  2. >
  3. all

Tools

Sort by:
View: Show: per page
Showing Products: 1 - 24 Total Products: 166

Clutch Alignment Tool

…606, 656, 664, 666, 686 The dimensions of this clutch line up tool are: (small spline) 1-1/8" spline O.D., 10 splines, 0.787" pilot and 9-3/8" overall length; (large spline) 1-11/16" spline O.D. and 16 spline. The dimensions of this tool are: (small spline) 1-1/8" spline O.D., 10 splines, 0.787"…

Product Number: ABC3109
Price: $22.95

Clutch Alignment Tool

AC Combines - Fits: A, AII, C, CII, F, F2, G Allis Chalmers - Fits: D21, 210, 220 Avery - Fits: A, BF, BG, R Case - Fits: [ S, SC, SI (To Sn: 5600000) ] Ford - Fits: Golden Jubilee, Jubilee, NAA, NAB, 2N, [ 600, 620, 630, 640, 700, 740, 800, 820, 840, 900 (To SN: 14257, W/ Single clutch) ], 8N, 9N…

Product Number: ABC412
Price: $6.99

Fuel Tank Filler Neck Straightening Tool

…filler neck tabs to make the cap seal properly (not for use with tanks using baffled filler necks). This part is a duplicate of the factory IH service tool that works in many applications using the ABC1880, IHS226, IHS416 & JDS416 caps. Includes instructions. Used to straighten bent filler necks…

Product Number: ABC2672
Price: $129.99
Related Products: Filler Neck | Farmall 706 Gas | John Deere 40

Clutch Alignment Tool

IH Industrial - Fits: I6 International / Farmall - Fits: F20, ID6, M, MD, MDV, MV, O6, ODS6, OS6, Regular (SN: 39405 and up), Super M, Super MD, Super MDV, Super MV, [ Super W6, Super WD6 (both up to SN: 9084) ], T20 Minneapolis Moline - Fits: ZB, ZBE, ZBN, ZBU Spline diameter: 1-1/2"; 10 splines;…

Product Number: ABC3151
Price: $15.95

Hydraulic Piston Pump Valve Seat Installation Tool

Ford - Fits: [ Golden Jubilee, Jubilee, NAA, NAB, 2000 3 cylinder, 2000 4 cylinder, 2031, 2100, 2110, 2111, 2120, 2121, 2131, 2150, 2300, 2310, 2600, 2600V, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3600, 3600V, 3610, 3910, 4000 3 cylinder, 4000 4 cylinder, 4000SU, 4030 3…

Product Number: FDS2857
Price: $39.99

Hydraulic Piston Pump Valve Seat Removal Tool

Ford - Fits: [ Golden Jubilee, Jubilee, NAA, NAB, 2000 3 cylinder, 2000 4 cylinder, 2031, 2100, 2110, 2111, 2120, 2121, 2131, 2150, 2300, 2310, 2600, 2600V, 2610, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3600, 3600V, 3610, 4000 3 cylinder, 4000 4 cylinder, 4000SU, 4030 3 Cylinder,…

Product Number: FDS2855
Price: $66.50

Brake Pin Removal Tool

Allis Chalmers - Fits: D17 (up to SN: 42000), WD, WD45, WD45 (diesel) Note: Pin must have at least half of the head remaining for the puller to function properly..

Product Number: ACS3558
Price: $71.75

Brake Riveting Tool

…Fits various models Use to rivet brake linings to existing shoe or band. Includes a tool to drive out your old rivets, a tool to drill & countersink the linings and a tool to peen the new rivet. Our brake rivet tool mounts into a vice. Comes complete with instructions.* 1-1/4" throat depth* 1/8"…

Product Number: MIS1131
Price: $37.50

Hydraulic Cylinder Seal Kit

…washer, (2) 371218R1 washer, (1) 383669R1 washer, (2) 404015R1 washers. Also fits the following IH equipment using the IH cylinders listed above: Tool bar: 82 Snow blower: 70, 80 Rotary cutter: 711 Moldboard plow: 710 Conser-till plow: 60, 6000 Vibra chisel: 645 Chisel plow: 45, 55, 4500, 5500…

Product Number: IHS3473
Price: $66.50

Brake Riveting Tool

Allis Chalmers - Fits various models Case - Fits various models Cockshutt - Fits various models Ford - Fits various models International / Farmall - International / Farmall - Fits various models Fits John Deere - Fits various models Massey Ferguson - Fits various models Massey Harris - Fits various…

Product Number: MIS2547
Price: $92.50
Related Products: 4020 Brake | Mis2547 | Brake Rivet Tool

New Clutch Kit

…70247744, 70247745 * Includes new 9" woven clutch disc w/ 1 1/8"-10 splined hub* 9" pressure plate* Throwout bearing* Pilot bearing* Clutch lineup tool.* 2 Different sizes were used for these models (8 1/2" or 9" diameter), Must measure old one BEFORE ordering a kit* Please note this does not…

Product Number: ACS2470
Price: $179.99

Clutch Kit (Rockford Clutch)

…kit includes:* 1 new clutch disc* 1 new pressure plate * 1 new throwout bearing (graphite like original)* 1 clutch pilot bushing and an alignment tool* The woven clutch disc is 6.5" OD with 10 splines and a 15/16" hub.* Please note: This clutch comes pre-adjusted, There are other adjustments that…

Product Number: IHS645
Price: $175.80

Clutch Kit (Engine)

…with Single 10" clutch. Please verify size before ordering. Clutch kit includes:* New pressure plate* Woven clutch disc dimensions:* 10" O.D.* 10 splines* 1-3/8" spline I.D.* Throw-out bearing.* (2) Pilot bearings (M series used 2 different ones)* (2) line up tools (M series used 2 different ones)

Product Number: JDS3013
Price: $268.50
Related Products: John Deere 440 Clutch | John Deere M | Clutch

Tool Box

Allis Chalmers - Fits various models Case - Fits various models Cockshutt - Fits various models Ford - Fits various models International / Farmall - International / Farmall - Fits various models Fits John Deere - Fits various models Massey Ferguson - Fits various models Massey Harris - Fits various…

Product Number: ABC472
Price: $32.95

Float Ride Torsion Spring Installation Tools (2-Piece set) - Fits John Deere tractors

Fits John Deere - [ 50, 520, 530, 620, 630, 720, 730, 80, 820 2 cylinder, 830 2 cylinder ('some') ], 840 2 cylinder ('some', SN: 8400200 and up) * Use to spread the rubber torsion springs (JDS2686) under tension to install the adjusting handle, JDS533. * Use to spread the rubber torsion springs…

Product Number: JDS2541
Price: $42.85

Tool Box

Allis Chalmers - Fits: B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, RC, U, WC, WD, WD45, WF, 170, 175, 180, 185, 190, 190XT, 210, 220, 7000, 7030, 7040, 7050, 7060, 7080 Case - Fits: C, CC, CI, CO, D, DC, DI, DO, L, LA, LAI, LI, RC, S, SC, SI, SO, V, VA, VAC, VAH, VAO, VC, VO, 1030, 1031, 1032,…

Product Number: ABC4542
Price: $24.99
Related Products: Ford Golden Jubilee | Toolbox | Farmall M

Tool Box

Allis Chalmers - Fits: B, C, CA, D10, D12, D14, D15, D17, D19, D21, G, RC, U, WC, WD, WD45, WF, 170, 175, 180, 185, 190, 190XT, 210, 220, 7000, 7030, 7040, 7050, 7060, 7080 Case - Fits: C, CC, CI, CO, D, DC, DI, DO, L, LA, LAI, LI, RC, S, SC, SI, SO, V, VA, VAC, VAH, VAO, VC, VO, 1030, 1031, 1032,…

Product Number: ABC4545
Price: $24.99

Tool Box

Fits John Deere - AO, AR (SN: 281400 & up), G, 60 (Standard (up to SN: 6042999), Orchard (all serial numbers)), 620 (Orchard), [ 70, 720 (Rowcrop) ], 730 (Rowcrop Gas); Replaces: AA7265R, AF636R * 15" long* 3-1/2" wide* 4" tall

Product Number: JDS129
Price: $59.95
Related Products: Tool Box | Toolbox

Brake Riveting Tool

Rachel will show you how to use the brake riveting tool to make your brake job easier.

Clutch Alignment Tool

…9" clutch) ] Oliver Combine - Fits: 525, 535, 545 The dimensions of this line up tool are: 10 spline, 1-1/4" spline O.D., 0.970" O.D. pilot, and is 5-1/2" overall length. The dimensions of this tool are: 10 spline, 1-1/4" spline O.D., 0.970" O.D. pilot, and is 5-1/2"…

Product Number: ABC3113
Price: $22.50

Clutch Alignment Tool

Allis Chalmers - Fits: G (Must wrap pilot w/ tape to center the disc) International / Farmall - Fits: Cub, Cub Loboy, 154, 184, 185 Massey Harris - Fits: Pony * Plastic* 10 splines* 15/16" spline outside diameter* 0.625" pilot diameter

Product Number: ABC1437
Price: $8.49

Clutch Alignment Tool

MF Industrial - Fits: [ 20, 30, 50A, 50C (W/ 10 Teeth on Cover ) ], 202, 203, 204, 2135, 2200, [ 302, 3165, 4500 (Drive Disc Only ) ] Massey Ferguson - Fits: F40, Super 90, Super 90WR, [ TE20, TEA20, TO20 (1 1/8" Disc ) ], TO30 (Single Stage w/10 Spline 1 1/8" Input Shaft ), TO35 (Drive Disc only ),…

Product Number: ABC4391
Price: $11.99

Clutch Alignment Tool

Ford - Fits: [ 2300, 3110, 3120, 3190, 3300, 3310 (Dual Stage w/15 Spline Before 10/1969 ) ], [ 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3600, 3610, 3910, 4000 3 cylinder, 4100, 4110, 4410, 4600, 4610, 4630 (Single & Dual Stage w/ 15 Spline Trans. Disc ) ], [ 3110, 3120, 3190, 3300, 3310,…

Product Number: FDS4388
Price: $11.99

Clutch Alignment Tool

Ford - Fits: [ 2000 3 cylinder, 4000 3 cylinder (1965-1974) ], 2150, 2300, 2310, 2600, 2600N, 2600V, 2610, 2810, 2910, 3000 (3 Cyl 1965-1975), 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3330, 3430, 3600, 3600N, 3600V, 3610, 3900, 3910, 3930, 4100, 4110, 4130 3 Cylinder (1990-1999), 4140,…

Product Number: FDS4397
Price: $11.99
Did you find this search useful? Yes No
Sort by:
View: Show: per page