Wd

Sort By:
View:
Show:
per page
3 Position Light Switch. Fits B, C, CA, G, WC, WD, WD45 (All with cutout on generator)

3 Position Light Switch. Fits B, C, CA, G, WC, WD, WD45 (All with cutout on generator)


Allis Chalmers - Fits: [ B, C, CA, G, RC, WC, WD, WD45, WF (Serviceable, with cut out on generator) ]; Replaces: 208197, 70208197 Avery - Replaces: AT261 Case - Fits: [ VA, VAC, VAC-11, VAC-12, VAC-13, VAC-14, VAH, VAI, VAO, VAS (To SN# 5060679 with cut out on generator) ]; Replaces: VTA463…
Product Number: ACS139
Price: $39.95

Related Products: Light Switch | Acs139 | John Deere B

Manifold Stud

Manifold Stud


Allis Chalmers - Fits: WC, WD, WD45 (Early), WF (Gas Only); Replaces: 203072, 70203072 * 4-1/2" long* 3/8" - 16 NC (both ends)* 6 used per manifold* Sold individually
Product Number: ACS217
Price: $4.95

Related Products: Manifold Stud | Allis Chalmers Wc | Allis Chalmers Exhaust Manifold

Brass Manifold Nut

Brass Manifold Nut


…- Fits: TL6, Power Unit: B125, W201, Speed Patrol: W Allis Chalmers - Fits: B, C, CA, D10, D12, D14, D15, H3, I40, I400, I60, I600, IB, RC, WC, WD, WF, Forklift: RT40, Gas or LP: WD45; Replaces: 70203441, 70239400 Case - Fits: V, VA, VAC, VAC-11, VAC-12, VAC-13, VAC-14, VAH, VAI, VAIW, VAIW-3,…
Product Number: ABC2290
Price: $0.95

Related Products: Manifold | Allis Chalmers Exhaust Manifold

Seat Pivot Bolt Bushing

Seat Pivot Bolt Bushing


Allis Chalmers - Fits: CA ( with pan seat), WD (with pan seat, SN: 127007 & up), WD45 (Gas or Diesel with pan seat); Replaces: 225183, 70225183 1 USED PER TRACTOR. 0.635" is the inside diameter. The overall length is 3.368".
Product Number: ACS328
Price: $24.95

Related Products: Allis Chalmers Seat Bushings | Seat Bushings | Wd45 Seat

Field Resistor On Light Switch

Field Resistor On Light Switch


Allis Chalmers - Fits: [ B, C, CA, G, IB, RC, WC, WD, WF (using the original switch (208197) and cutout system) ], WD45 (Gas models up to SN: 201241 using the original switch (208197) and cutout system) Case - Fits: [ VA, VAC, VAH, VAI, VAO (For switch # VTA463 on models up to SN: 5060679) ] Delco -…
Product Number: IHS950
Price: $14.50

Related Products: Farmall M Resistor | Farmall H | Allis Chalmers Light Switch

Basic Marvel Schebler Carburetor Repair Kit

Basic Marvel Schebler Carburetor Repair Kit


Allis Chalmers - Fits: WC, WD, WF Carb Mfg #'s - : TSX159, TSX422 ***Make sure to find your carb manufacturer number in the list above, If your number is not in this list, this kit is not the correct kit for your application.*** This kit includes throttle shaft, needle and seat, float lever pin,…
Product Number: ABC177
Price: $38.50

Related Products: Allis Chalmers Wd | Marvel Schebler Tsx 422 | Wc

Complete Zenith Carburetor Repair Kit

Complete Zenith Carburetor Repair Kit


Allis Chalmers - Fits: WC, WD, WF Carb Mfg #'s - 10981A, 9707A, 9707C, 8979, 9707, 10981, 209312, 213348, 224749 * Make sure to find your carb manufacturer number in the list above.  If your number is not in this list, this kit is not the correct kit for your application. * This…
Product Number: ABC178
Price: $53.50

Related Products: Zenith Carburetor | Zenith Carburetor 9707 | Allis Chalmers Wd Carb Kit

Exhaust Stack  ---  (Chrome Straight)

Exhaust Stack --- (Chrome Straight)


Allis Chalmers - Fits: D17 (Gas Except Series IV), WC, WD, WD45 (GAS) CHROME DOUBLE WALL LINED --- 3 1/2" O.D. --- 22 1/2 BODY" + 6 1/2" BASE = 29" OVERALL, USE RCS016 RAINCAP.
Product Number: ACS187
Price: $109.95

Related Products: Exhaust Allis Chalmers | Chrome Stacks | Allis Chalmers D17

Base Gasket for Bullet Tail Light

Base Gasket for Bullet Tail Light


- Replaces: Guide Number: 5930478 Allis Chalmers - Fits: B, C, CA, [ D10, D12, D15 (Up to SN: 9001) ], D14, D17 (Up to SN: 42001), G, WD, WD45 International / Farmall - Replaces: 354310R1 JD Lawn & Garden - Fits: [ 110, 112 (Up to SN: 100000) ] Fits John Deere - A (SN: 584000 & up), B (SN:…
Product Number: ABC1979
Price: $1.45


Hydraulic Lift Cylinder Packing Kit

Hydraulic Lift Cylinder Packing Kit


…booster), D12 (up to SN: 3001 with traction booster), WD, WD45 (diesel), WD45; Replaces: 0222677-7, 222677, 70222677 * 1.740" O.D.* 1.210" I.D.5-piece kit for 1 cylinder. If you have a CA, early D10 or D12 both with traction booster gauge, WD or a WD45 then you need to order (2) ACS3464, one for…
Product Number: ACS3464
Price: $12.50

Related Products: Allis Chalmers C Hydraulic Cylinder | Hydraulic Cylinder | Hydraulic Lift Cylinder

Intake & Exhaust Manifold -- Fits Allis WD45, WD, WC & Early D17 Gas

Intake & Exhaust Manifold -- Fits Allis WD45, WD, WC & Early D17 Gas


…5425) Allis Chalmers - Fits: D17 (Gas UP to SN: 32000, Without Threaded Outlet), WC (Gas, Engine Sn: 106510 & Up w/ Exhaust Through The Hood), [ WD, WD45 (Gas/LP) ]; Replaces: 224782, 229416, 70224782, 70229416 Allis tractor parts are a particular specialty for Steiner Tractor. Our Allis WD45…
Product Number: ACS004
Price: $172.50

Related Products: Wd45 | Allis Chalmers | Acs004

Restoration Quality Wiring Harness For Tractors Using 2 Wire Cut-Out Relay

Restoration Quality Wiring Harness For Tractors Using 2 Wire Cut-Out Relay


Allis Chalmers - Fits: [ WD, WD45 (Gas) ]; Replaces: 208337, 224635, 70208337, 70224635, Main Harness: 222532, 70222532 For generator systems w/ cut-out relay only ***ORIGINAL STYLE WITH SOLDERED TERMINALS INCLUDES LIGHT WIRES & DIAGRAM --- COMPLETE KIT INCLUDES ALL WIRES --- For 6 volt systems…
Product Number: ACS331
Price: $168.80

Related Products: Wd45 | Allis Chalmer Wd Wiring Harness | Wiring Harness

3 Point  Hitch Conversion Kit

3 Point Hitch Conversion Kit


Allis Chalmers - Fits: D14, D15, WD, WD45 Category 1 --- Lift arms = 5/8" Thick X 3" Wide --- Easy to install and remove -- Snap Coupler Drawbar MUST Be Removed To Install, Adjustable Uprights Attach To Snap Couplers (which are not included, or hitch can be bolted to snap couplers) --- Top link and…
Product Number: ACS011
Price: $420.00

Related Products: Allis Chalmers 3 Point Hitch | Lift Arms | Allis Chalmers 3 Point Kit

3 Point Conversion Kit

3 Point Conversion Kit


Allis Chalmers - Fits: D14, D15 (Series I), D17 (Series I and II), WD, WD45 Category 2 --- Leave your drawbar on --- Bolts onto drawbar --- Will fit D15 Series II with no sway block --- D17 Series III with no sway block
Product Number: ACS014
Price: $575.00

Related Products: Allis Chalmers 3 Point Hitch | 3 Point Hitch Parts | Allis Chalmers Draw Bar

Complete Engine Gasket Set

Complete Engine Gasket Set


…Patrol: W (Gas & LP models above engine SN 72459 with 15 stud head), [ Wheel Loader: TL10, TL11, TL12 (Gas / LP) ] Allis Chalmers - Fits: [ D17, WD, WD45, 170, 175 (Gas / LP) ], [ WC, WF (Gas & LP models above engine SN 72459 with 15 stud head) ]; Replaces: 226638, 255320, 255322, 70226638,…
Product Number: ACS1320
Price: $111.45

Related Products: Head Gasket Allis Chalmers | Allis Chalmers Wc Gaskets | Head Gasket

Knob

Knob


Allis Chalmers - Fits: B, C, CA, G, RC, WC, WD, WD45, WF Avery - Fits: Avery: BF, BG Case - Fits: VAC, VAH, VAI, VAO (all up to sn 5060679) Cockshutt - Fits: Co-Op with Buda Over Head Valve Engine: E3, E4, E5, Cockshutt: 30, 40, 50 Fits John Deere - [ A, AO, AR, B, BO, BR, D, G, H, L, LA (With cut…
Product Number: ABC367
Price: $4.95

Related Products: Knob | Allis Chalmers Wd | Light Switch Knob

2017 Ford 8N Tractor Sweepstakes
Sort By:
1 - 16 of 595
Show:
per page

All content and images © Steiner Tractor Parts 1660 S. M-13 Lennon, MI 48449 Ph: 800-234-3280 - All Rights Reserved