1-800-234-3280

Welcome to Steiner Tractor Parts

    1 - 24 of 118 Products >
  1. Valve Seals
  2. >
  3. all

Valve Seals

Sort by:
View: Show: per page
Showing Products: 1 - 24 Total Products: 118

Valve Train Kit

Valve spring: 24544DA, Stem seals: 386192R1, Keepers (locks): 42026D, Intake valve: 50706DA, Exhaust valve: 50707DA, Valve guides: 8049DR Included in this kit are the valves, guides, springs, keepers (locks) and stem seals. The dimension of the intake valve length is 5.360" long. The exhaust valve

Product Number: IHS3318
Price: $119.95

Rachel Gingell, Author at Antique Tractor Blog

…attention. If the hydraulics drift down, that usually means the relief valve is squeaking by. This is easy to check – just remove the side door and watch the oil move. If the oil is leaking out of the piston top, the seal or o-ring could be damaged. While the 8N piston originally came with…

Valve Train Kit

…70229911, Valve locks (keepers): 209103, 70209103, 7437697, Intake guide: 203142, 241536, 70203142, 70241536, Exhaust valve: 229143, 70229143, 241527, 70241527 Included in this kit are the valves, guides, springs, keepers (0.100" wide keeper groove) and stem seals. There kit is for valve seats with…

Product Number: ACS3303
Price: $128.50

Valve Train Kit

…Stem seals: 279299R1, Valve springs: 356951R1, Intake valves: 362435R1, Exhaust valves: 362436R1, Keepers (locks): 41339D, Valve guides: 8044DR Included in this kit are the valves, guides, springs, keepers (locks) and stem seals. The intake and exhaust valve lengths are each 6.06" long. The valve

Product Number: IHS3324
Price: $194.95
Related Products: Valve Stem

Cylinder Head Gasket Set

Ford - Fits: 2N, 8N, 9N; Replaces: 7HA6521, 8BA6571, 8N6051A, 9N6022, 9N9448 Set includes: cylinder head gasket, (2) valve cover side plate gaskets, (8) valve guide seals, (2) manifold gaskets, (1) governor gasket

Product Number: FDS036VGK
Price: $25.95
Related Products: Ford 8n Head | Head Gasket | 8n Gasket Kit

Base Engine Kit

…rings and wrist pins, pin bushings and complete gasket set with crankshaft seals. Measure sleeve thickness BEFORE ordering.* NOTE: Order rod and main bearings separate to make an out-of-frame-kit; if valve train kit is needed, order FDS466. Pin bushings may need sized after installed.*…

Product Number: FDS2976
Price: $235.00

Oil Seal

…(PTO Clutch Drum Inner Seal on following (Rowcrop, Orchard, HiCrop and Standard) with Engine driven live PTO. Also used For Dual power trol valve control arm seal.) ], [ 820 2 cylinder, 830 2 cylinder, 840 2 cylinder (Used For Dual power trol valve control arm seal.) ]; Replaces: AA5247R, AM906T,…

Product Number: ABC1501
Price: $9.95

Valve Train Kit

…Replaces: Valve springs (non rotor style): 24544DA, Valve guides (not flanged): 356583R21, Stem seals: 386192R1, Intake valves: 42024D, Exhaust valves: 42025D, Keepers (locks): 42026D Included in this kit are the intake and exhaust valves, guides, springs, keepers (locks) and stem seals. The…

Product Number: IHS3306
Price: $164.95

Valve Train Kit

…Replaces: Stem seals: 1750062M1, Intake valves: 1751518M1, Exhaust valves: 1751519M1, Valve guides: 830490M91, Valve springs: 21176A, 840754M91, Keeper pins: 840753M91, 18291A Included in this kit are the valves, guides, springs, keeper pins and stem seals. The overall length of the valves is 3.940"…

Product Number: MFS3327
Price: $104.95

Valve Grind Gasket Set

…398177R94, 398177R95, 398177R96* Carburetor mounting gasket: 31336D* Thermostat housing gaskets: 397966R1, 397968R1, 397971R1* Head gasket: 398066R3* Valve cover gasket: 398068R2* Intake/exhause manifold gasket: 530682R1* (3) Valve cover grommets: 164420R1* Valve stem seals: 535166R1, 866834R1

Product Number: IHS3764
Price: $82.75

Valve Train Kit

…half: 1004512M1, Valve stem seal: 1750062M1, Keeper pin: 18291A, Valve spring: 21176A, Intake valve: 830487M91, 1750070M1, Exhaust valve: 830488M91, 1750072M1, Valve guide: 830490M91, 1750069M1 Included in this kit are the valves, guides, springs, keepers (locks), pins and stem seals. The dimension…

Product Number: MFS3331
Price: $99.95
Related Products: Z134 Valves | Z134 Engine | Valve

Valve Train Kit

…555A, 555B Included in this kit are the valves, guides, springs, keepers (locks) and stem seals. The dimension of the intake valve is 5.74" long and the head diameter is 1.805". The exhaust valve is 5.74" long and the head diameter is 1.500". The valve spring is 2.208" long. NOTE: Our kit includes…

Product Number: FDS3344
Price: $94.50

Valve Train Kit

Valve guide: 356583R21, Intake valves: 366302R2, Exhaust valves: 366303R4, Exhaust springs: 368450R1, Stem seals: 386192R1, Intake springs: 406723R1, Keepers (locks): 42026D Included in this kit are the valves, guides, springs, keepers (locks) and stem seals. The dimension of the intake valve length…

Product Number: IHS3315
Price: $154.95
Related Products: C135 | Farmall Valve Kit | C153

Valve Train Kit

…Replaces: Valve guide: 237248R1, Valve springs: 367192R1, Keeper (lock): 41339D, Valve stem seals: 866834R1, Intake valve: 234275R1, 234276R1, Exhaust valve: 372699R3, 404179R1 Included in this kit are the valves, guides, springs, keepers (locks), and stem seals. The dimension of the intake valve is…

Product Number: IHS3347
Price: $225.95
Related Products: Valve Seat | Farmall 460 | Farmall Valve

Head Gasket Set

…which was used on the early 600 and 700 models, then please view FDS425* For engines with 4-1/8" bore or less.* Fits 134, 172 & 192 C.I. 4 cylinder gas / LP engines with head casting #D1NL6090D,  EAF6090F, EAF6090H, 310098, & 310100.* Governor seal ABC3969 not included

Product Number: FDS430
Price: $71.95

Full Gasket Set with Crankshaft Seals

Fits John Deere - [ 620, 630 (gas, LP) ]; Replaces: AA6848R, AA6849R, RE526775 * Includes sealing washers. Valve, Ring, Cylinder & Crankshaft Replacement Gasket Set;* Also Replaces # FS3134* Narrow side of the fire ring (crimp) of the head gasket goes toward the cylinder head.

Product Number: JDS3131
Price: $248.50
Related Products: John Deere 630 | 630

Full Gasket Set with Crankshaft Seals

Fits John Deere - 720 (both gas, LP; includes sealing washers ), 730 (both gas, LP; includes sealing washers); Replaces: AF3331R, AF3332R, RE524407 * Valve, Ring, Cylinder & Crankshaft Replacement Gasket Set, Includes sealing washers.* Also Replaces # FS2703.* Narrow side of the fire ring…

Product Number: JDS3135
Price: $248.50
Related Products: 730 John Deere

Full Gasket Set with Crankshaft Seals

…pipe packings: B60R (2)* Valve cover sealing washers: B425R (2)* Valve cover gasket: B3722R* Cylinder water inlet gasket: B3754R* Cylinder head water outlet gasket: B3565R* Cylinder block to crankcase gasket: B3742R* Cylinder head gasket: B3743R* Cylinder head sealing washers: B369R (10)* Sediment…

Product Number: JDS4170
Price: $248.50

Valve Train Kit

…Intake valve: T5307, Exhaust valve: T5308B, Valve guide: T5309, Valve keeper (lock): T5312, Valve spring: T5509B Included in this kit are the valves, guides, springs, keepers (locks) and stem seals. The dimension of the intake valve is 4.565" long and the head diameter is 1.511". The exhaust valve

Product Number: COS3338
Price: $215.95

Valve Train Kit

…Intake valve: T5307, Exhaust valve: T5308B, Valve guide: T5309, Keepers (locks): T5312, Valve spring: T5509B Included in this kit are the valves, guides, springs, keepers (locks) and stem seals. The dimension of the intake valve is 4.565" long and the head diameter is 1.511". The exhaust valve is…

Product Number: COS3334
Price: $145.95
Related Products: Cockshutt 30 | Coop E3

Valve Train Kit

seals: 279299R1, Valve springs: 356951R1, Keepers (locks): 41339D, Intake valves: 50731DA, Exhaust valves: 50732DA, Valve guides: 8044DR Included in this kit are the valves, guides, springs, keepers (locks) and stem seals. Does not include retainers. The dimensions of the intake and exhaust valve

Product Number: IHS3321
Price: $127.95

Valve Train Kit

…VAS; Replaces: Valve keeper (lock): VT3234, Valve guide: VTA911, Intake valve: VT3232, VTA2634, Exhaust valve: VT3233, VTA2635, Valve spring: VT3372, A30025 Included in this kit are the valves, guides, springs, keepers (locks) and stem seals. The dimension of the intake valve is 4.971"…

Product Number: CKS3341
Price: $168.95
Related Products: Case Valves | Case Vac | Valve

Valve Train Kit

…Replaces: Valve springs: 24544DA, Valve guides (not flanged): 356583R21, Stem seals: 386192R1, Keepers (locks): 42026D, Intake valves: 57797D, Exhaust valves: 57798D Included in this kit are the valves, guides, springs, keepers (locks) and stem seals. The dimension of the intake valve length is…

Product Number: IHS3311
Price: $129.95

Valve Train Kit

…70229911, Exhaust valve: 241527, 70241527, Intake valve: 241535, 70241535, Intake guide: 241536, 70241536 * Included in this kit are the valves, guides, springs, keepers (0.100" wide keeper groove) and stem seals.* The intake valve seat angle is at 30 degrees.* The exhaust valve seat angle…

Product Number: ACS3309
Price: $124.50
Related Products: Valve | Allis Chalmers D17 | Valve Seat
Did you find this search useful? Yes No
Sort by:
View: Show: per page